Volume 10 | Issue 6

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

LSTM, time-series, forecasting

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

This Project is used to detect the real-Time fault detection in the transformer with the help of Io/T based software system connected to this project. For this real-time aspect, we made use of one temperature sensor, one potential transformer, earth fault, oil level, and one current transformer for monitoring the Temperature, Voltage, and current data of the transformer and then send them to a remote location. These five analog values are taken in multiplexing mode and connected to a programmable microcontroller of PIC18f4550 families through an ADC inbuilt. They are then sent directly to a Wi-Fi module under TCP IP protocol to a dedicated IP that displays the data in real-time chart form in any web-connected PC / Laptop for display in 3 different charts. So, This Transformer Health Measuring will help to identify or recognize unexpected situations before any serious failure which leads to greater reliability and significant cost savings

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

OIL LEVEL SENSOR, TEMPERATURE SENSOR, CURRENT SENSOR, VOLTAGE SENSOR, PIC18F4550

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

It's been observed that aircraft systems suppliers face huge challenges in maintaining its aircraft system products continuously operating without failures during flight operation. A failure occurrence to any of its aircraft systems, could lead to a significant effort to investigate the issues, financial burden and compromise its competitive advantages. Therefore, there is a need for a system to monitor the performance of the aircraft systems and enable prognostic maintenance which will predict the remaining life of systems and its components, to repair and/or replace the system and avoid operational cost and schedule impacts. This paper describes the basic framework necessary for establishing data management and diagnostic system to assist aircraft system maintenance.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Aircraft Systems, Prognostic, Maintenance

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Solar energy is playing a very important role in the present global energy production scenario. In this project, an experimental setup is designed in which water spray is fitted to the solar panel to reduce its temperature and bring the temperature to a normal operating point. Before this, both air-cooling model and water-cooling model conditions are investigated under normal operating conditions. After getting the result for the various model we compared our water cooling spray results with the ordinary solar panel. The other method is the tracking of the sun in real-time. By combining these two methods we can increase solar panel efficiency by a great amount.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Photoelectric conversion efficiency, Maximum allowable temperature, solar panel cooling, water spray, sun tracking

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

The current paper focused on a taluka-by-taluka comparison of dairy industry infrastructure and dairy cooperative societies (DCS) in the Bidar district. The study examines and analyses dairy industry indicators such as agricultural land, irrigation level, cattle population, veterinary hospitals, dairy cooperative societies, active milk pourer, and milk collection. According to the findings, Bhalki has the most cropped area of the five talukas in the Bidar district. Bidar and Humanabad talukas have the most crossbred population and veterinary institutions in the district, and they collectively contribute 56.7 percent of the district's milk.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

KMF, DCS, GUMUL.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Medicinal plants which also known as medicinal herbs, chemical compounds from plant species which contain many medicinal values and so it is widely used against many diseases not only internal and external diseases also. Since ancient times plants and plant products used as medicine and are used till now. Nowadays many medicinal plants are extinct because of the unawareness of their medicinal values or medicinal properties. Cinchona is one of the most important medicinal plants widely distributed in South America and this plant was introduced in India in 1859. In India cinchona plant is distributed throughout the Western Ghats (Nilgiris and Anamali) and it is also grown in Darjeeling (west Bengal).cinchona plant collectively known as koina plant, Peruvian bark, Jesuits bark etc., coming under the family Rubiacea. This plant is rich sources of alkaloids, more than 30 types of alkaloids present. Out of these Quinine is most valuable and is used as anti-malarial agent from ancient days and are used still today. Literature study revealed that along ant malarial activity, the cinchona plant has many other medicinal properties like, Anti-bacterial, Anti-fungal, Anti-oxidant, Anti-cancerous, and Anti-inflammatory and some Nano particles are synthesized from this plant extract.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Cinchona, Alkaloids,Microscopic properties,Propagation techniques,anti-malarial,ant-microbial, anti-obesity, anti-cancer, anti-oxidant, anti inflammatory, applications.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

This paper is based on the idea of hiring equipment. This project has upgraded the E-commerce website to close the gap between the farmer and the seller on a lease basis. Before logging into the main application the user must go through the login system to access, only the user can select and book resources. In this paper it is full and full of data about the products. This paper provides assistance to farmers. The main purpose of this website is to manage a series of agricultural machinery including various agricultural machinery such as Harvester, JCB, Tractor, Pickup, Rotor and more. The proposed system is easy to use for end users. The website allows the seller and farmer to update their previous information.[3][5]

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Hiring, equipments, E-Commerce, Rental duration and charges etc.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Abstract: The main aim of the study was to find out the family climate, emotional intelligence, personal adjustment and academic achievement of secondary school students in Raichur district. This study was descriptive survey method to find out the correlation ship exists between the intrinsic objects. The tools used were Personal adjustment scale by A.K.P. Sinaha and R.P.Singh, Bell's Adjustment Inventory developed by Dr. R.K. Ojha (1999) and Family Environment scale by Bhatia and Chadha (1993) used for data collection. The investigator selected 1200 sample from secondary school students in Raichur district based on Stratified random sampling technique. Mean, S.D., t-test and ANOVA statistical techniques were used for data analysis. The results shows there was significant relationship between the family climate, Emotional Intelligence, personal adjustment and academic achievement among the different category secondary school students.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Family climate, Emotional Intelligence, Personal adjustment and Academic achievement

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

This paper presents about the efficient range of power supply and it is highly reliable for an Electric Vehicle charging system. Battery, Solar PV source, Super capacitor plays a vital role for this extended power supply. Main source of power is battery, and is connected with super capacitor during transient phase like overloading and starting. To charge the Hybrid Electric Vehicle, the Hybrid Energy Storage System(HESS) along with super capacitor and battery is widely used for improving the charging and discharging characteristics of the battery, thus increases the instantaneous output power. For the purpose of reducing the energy loss of the Battery Super Capacitor Hybrid Energy Storage System, the bidirectional DC/DC converter with the soft switching technology is mandatory. Initially, the power received from the PV array is utilized to charge the super capacitor as well as battery. when the PV could not supply enough power to charge the EV, then the power from the battery and super capacitor can be utilized. System performance is also compared with and without using super capacitor with the help of MATLAB software.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Electric vehicle, Battery, Solar PV, Super capacitor, Hybrid energy storage system, Bidirectional dc/dc converter, MATLAB

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

In the upcoming Internet of Things (IoT), the everyday objects that surround us will become proactive actors of the Internet, generating and consuming information. The elements of the IoT comprise not only those devices that are already deeply rooted in the technological world (such as cars or fridges), but also objects foreign to this environment (garments or perishable food), or even living beings (plantations, woods or livestock). By embedding compuational capabilities in all kinds of objects and living beings, it will be possible to provide a qualitative and quantitative leap in several sectors: healthcare, logistics, domestics, entertainment, and so on. Due to the drastic changes in technology in the last decade, so many advancements were introduced in electricity departments. The electricity bill can be paid now through E-Seva centers, Net-banking and even through mobile phones. In this project electricity consumption by the user i.e. Units consumed in that meter will be available in the mobile phone/pc through internet using IOT module is provided to read units available. Whenever there is a change in count value / units in the meter get changed, these values are displayed on IOT. Hence this project provides a best solution for the users to know how much amount of power is consumed in their day- to- day life and also the amount of power consumed is also under the user control. In this project electricity consumption by the user i.e. Units consumed in that meter will be available in the mobile phone through internet using IOT module is provided to read units available. Whenever there is a change in count value / units in the meter get changed, these values are displayed on IOT and also it reaches maximum units then load off else load on.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Energy meter;Debugging;Embedded systeem;Arduino nano;ESP8266-wifi modle;Arduino IDE

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Phishing URL, Feature Extraction, Block URL

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Bond strength assumes significant part in the structural performance of Reinforced Concrete (RC) component. Compressive strength and tensile strength of conventional concrete impacts bond strength of RC component. Glass powder with molecule size under 75 microns when utilized as cement substitution material, upgrades compressive strength and tensile of cement. In the examination work it is suggested to explore the impact of glass powder as a cement substitution material on compressive strength and tensile strength of reinforced concrete and bond strength in reinforced concrete. The substitution rate is proposed to be 0% to 30% with increments.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Concrete, Compressive Strength, Tensile Strength, Bond Strength

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Water purification has been a necessity since the beginning of civilization. Purification is necessary to reduce the risk of toxins from recharging runoff rain water and to avoid a variety of illnesses. In India, sand filters are often used to remove suspended and colloidal particles from water more quickly during the filtering process by laying down different sand beds. It's commonly used in industry to remove contaminants from water and waste water. The filtration process weakens at the start and end, lowering the filtrate's initial quality after back washing. However, scientists believe that the quality of water will deteriorate in the near future as a result of major increases in global warming, and that we must address this issue with appropriate solutions. The goal of this study is to present a variety of low-cost water filtration materials that are both effective and efficient at purifying water without being too expensive. These filtering materials can be used to replace sand filters, which take up more space, time, and maintenance, with filters that take up less space, time, and maintenance.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Low-cost, Low-cost filter materials, Sand Filter, Water quality, Charcoal, Cactus, Moring oleifera

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Today, Increase the demand of Renewable energy resources (RES) in distribution systems because total energy demand is supplied by the burning of fossil fuels and it is limited. In this project presents a control strategy of three phase four wire grid interfacing inverter to effectively utilize the renewable energy Source with grid. Controlling of inverter in such a way that to utilize the following function 1) compensate load current (i.e. reduce harmonics), 2) compensate load voltage (i.e. reduce harmonics), 3) compensate load reactive power and load neutral Current. The Renewable Energy Source may be Solar or Wind depends on distribution system voltage level. All these works of the inverter is done either individually or combined to overcome the unbalanced effects of all types of linear, non-linear, balance or unbalance loads at distribution level. This new control concept is demonstrated with extensive MATLAB/Simulink simulation to validated result.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Abstract: Over the past decade, as financially inclusive policies have been put in place financial institutions have started experimenting with different models for reaching the excluded and for offering various services to the target population. Since an all-inclusive financial system enhances efficiency and welfare by providing avenues for secure and safe saving practices and by facilitating a whole range of efficient financial services. Financial inclusion is the ease of access, availability and usage of the formal financial system by all members of the economy. While the importance of financial inclusion is widely recognized, the literature lacks a comprehensive measure that can be used to estimate the extent of financial inclusion through Gramin Bank across economies at a regional level. In this research study an attempt is made to fill this gap, and thus, an original contribution to the literature. In this present, by proposing an index of financial inclusion of working of Gramin Bank in Jharkhand the researcher made an effort to fill the Gap.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Key words: Financial inclusion, Dimensions of inclusion, Financial index, Jharkhand Gramin Bank.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

New handloom policy, West Bengal

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

DNA Replication can be a semiconservative technique whereby each parental strand is a templet for the synthesis of a cutting-edge complementary female offspring strand. The protein worried is DNA, that involves the relationship of deoxyribonucleoside 5?-triphosphates (dNTPs) to create the developing DNA chain. But DNA Replication is mass a number of state-of-the-art than associate in Nursing divorced protein response. Proteins which can be involved and proofreading mechanisms are needed to make certain that the accuracy of replication is like with the low frequency of mistakes it is required for mobile replication. In addition proteins and explicit DNA sequences are also wished every to affect replication and to copy the ends of eukaryotic chromosomes.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

DNA Replication, offspring, hereditary, initiation, elongation, and termination.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

ABSTRACT The clove bud (Syzygium aromaticum) extract used to be performed with the aid of using Soxhlet equipment and fenugreek seed (Trigonella foenum-graecum) extract was once executed via maceration technique by way of the usage of distilled water as solvent. Evaluation of antimicrobial undertaking of both extract was carried out by means of agar nicely diffusion method in opposition to gram tremendous bacterium S. aureus and gram negative bacterium E.coli. Minimum inhibitory concentration (MIC) of combine extracts was once decide by way of using broth dilution method. TLC bioautography and phytochemical evaluation had been also performed.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Key words: Maceration, Bioautography, Phytochemical, Evaluation, Extract

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Globalization seems to have a profound effect on the Assamese people in all aspects of thought, manners, eating habits, dress-up, festivals, customs, etc. Therefore, Assamese people are not bound by traditional customs of Assam only but influenced and accepted rituals, customs, manners, dress, food, etc. of other countries and other ethnic groups. One of the aspects of Assamese culture is folk Performing art. Globalization has its effect in this field of Folk Performing art too. Of course, this effect can be seen in both positive and negative aspects. Globalization has touched one of the richest folk cultures of Darrangi performing art that is Khuliya Bhauriya.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Globalisation, Folk Drama, Khulia Bhauriya

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Sign Language Recognition (SLR) targets interpreting the sign language into text or speech, to facilitate the communication between deaf-mute people and ordinary people. This task has a broad social impact but is still very challenging due to the complexity and large variations in hand actions. Existing methods for SLR use hand-crafted features to describe sign language motion and build classification models based on those features. However, it is difficult to design dependable features that can adapt to the wide range of hand gestures. To address this issue, we propose a novel convolutional neural network (CNN) that automatically extracts discriminative spatial-temporal features from raw video streams without any prior knowledge, thereby avoiding feature design. Multi-channel video streams with color information, depth clues, and body joint positions are used as input to the CNN to integrate color, depth, and trajectory information to improve performance. On a real dataset gathered with Microsoft Kinect, we approve the proposed model and show how it beats conventional methodologies in light of hand-created highlights. The created framework will be utilized as a learning device for gesture-based communication fledglings including hand recognition. The pictures were taken care of into a model called the Convolutional Neural Network for order (CNN). Keras was utilized to prepare the pictures. A uniform foundation and legitimate lighting are given. The's undertaking will likely foster an AI model that can order the different hand motions utilized in gesture-based communication fingerspelling.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Sign Language Detection, CNN, Image Processing

  License

Creative Commons Attribution 4.0 and The Open Definition