ISSN Approved Journal No: 2320-2882 | Impact factor: 7.97 | ESTD Year: 2013
Scholarly open access journals, Peer-reviewed, and Refereed Journals, Impact factor 7.97 (Calculate by google scholar and Semantic Scholar | AI-Powered Research Tool) , Multidisciplinary, Monthly, Indexing in all major database & Metadata, Citation Generator, Digital Object Identifier(DOI)
IJCRT Journal front page | IJCRT Journal Back Page |
Paper Title: MORPHOMETRIC ANALYSIS OF TUNGABHADRA RIVER BASIN OF KURNOOL DISTRICT, ANDHRA PRADESH USING GEOGRAPHICAL INFORMATION SYSTEM
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2105100
Register Paper ID - 206764
Title: MORPHOMETRIC ANALYSIS OF TUNGABHADRA RIVER BASIN OF KURNOOL DISTRICT, ANDHRA PRADESH USING GEOGRAPHICAL INFORMATION SYSTEM
Author Name(s): Bestha Appanna, Dr.Y.Sujatha
Publisher Journal name: IJCRT
Volume: 9
Issue: 5
Pages: a902-a915
Year: May 2021
Downloads: 1382
Geographical information system has been used for the calculation and delineation of the morphometric characteristics of the River basin. The study of morphometric analysis of Tungabhadra river basin has been based on the secondary source. The Dem data (Digital elevation model) for the study area downloaded from USGS earth explorer website. The downloaded data has been analysed using Arc GIS Software. In addition, we study linear, relief and aerial parameters of drainage basin Retrieved that (indices were computed). The stream order ranges from first to six orders. The analysis has revealed that the total number and length of stream segments is maximum in first order streams and decreases as the stream order increases. The stream order of the basin is form first order to sixth order , where the total number of the streams for the basin is 2580 out of which 1326 are first order 643 are second order 378 are the third order, 120 are the fourth order,78 are the fifth order streams and 35 are the six is order. The streams have been formed in Dendric drainage pattern drainage pattern with drainage density of 0.622 km2 infers the less permeable surface of the basin with thin vegetation and moderate to high elevation. The Bifurcation ratio (Rb) between different successive orders varies revelling the geostructural the shape parameters circulatory ratio (Rc )=0.28,Elongation ratio(Re) =0.31, form factor (Rf)=0.24 indicates elongated shape of the basin which increases the chance of infiltration. These studies are very useful for identifying and planning the ground water potential zones and watershed management.
Licence: creative commons attribution 4.0
Drainage network, Tungabhadra River basin, SRTM Dem, Arc GIS10.3
Paper Title: A REVIEW ON STANDARDIZATION OF A PROCESS-BASED CASSAVA AND MILK
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2105099
Register Paper ID - 206743
Title: A REVIEW ON STANDARDIZATION OF A PROCESS-BASED CASSAVA AND MILK
Author Name(s): Mohamed Doumbia
Publisher Journal name: IJCRT
Volume: 9
Issue: 5
Pages: a886-a901
Year: May 2021
Downloads: 1311
Cassava (Manihot esculenta Cralztz) is considered one of the most important root crops, mainly consumed by developing countries and cultivated in the tropics and subtropics where more than half of the population suffers from malnutrition. Cassava leaves are a source of richness in vitamins, proteins and minerals. As for its roots and leaves, they are deficient in amino acids namely methionine and cysteine, so there is a poor distribution of certain nutrients is the cassava plant. Cassava is also packed with many antinutrients which can be beneficial or toxic to our body depending on how much we consume. Cassava (Manihot esculenta Crantz) is one of the most valuable food crops capable of ensuring food security. These roots can be converted by processing to get enough food. The application of the machines for the processing of cassava roots has greatly contributed to add value to it, which has made it possible to make profit and provide food. The objectives of our study are to standardize a cassava and milk-based product in order to improve certain nutrient contents of cassava. All of this was aimed at reducing malnutrition caused by cassava consumption and reducing hunger.
Licence: creative commons attribution 4.0
Cassava, antinutrients, amino acid, milk, hunger
Paper Title: ROLE OF CISGENESIS AND INTRAGENESIS AS NEW PLANT BREEDING TECHNIQUE IN CROP
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2105098
Register Paper ID - 206735
Title: ROLE OF CISGENESIS AND INTRAGENESIS AS NEW PLANT BREEDING TECHNIQUE IN CROP
Author Name(s): Abbadi Aruna Prabha, Dr. Harshal Ashok Avinashe, Dr. Nidhi Dubey
Publisher Journal name: IJCRT
Volume: 9
Issue: 5
Pages: a881-a885
Year: May 2021
Downloads: 1285
Licence: creative commons attribution 4.0
cisgenesis, public opinion, alternative breeding approach, intragensis, regulation.
Paper Title: MARRIAGE LAWS WITH RESPECT TO MANUSMRITI
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2105097
Register Paper ID - 206738
Title: MARRIAGE LAWS WITH RESPECT TO MANUSMRITI
Author Name(s): Rishika Agarwal
Publisher Journal name: IJCRT
Volume: 9
Issue: 5
Pages: a876-a880
Year: May 2021
Downloads: 3601
This paper gives a brief description of the laws of Manu on marriage of a man and a woman, what an ideal marriage should look like and the expectations of a husband from his wife and vice versa. What drives this paper is the need to analyze if Manusmriti has influenced modern marriages as well and also if it is still relevant today. The paper also sheds light on how our society is still patriarchal and women have to struggle within their own homes for equality. Their status is not equal even in front of their husband. This is why women should realize their rights and fight against the norm of patriarchy.
Licence: creative commons attribution 4.0
manusmriti, marriage laws, manu, arthsastra
Paper Title: PACKAGING DESIGN: MATERIALS AND INNOVATIONS USED IN FOOD PACKAGING
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2105096
Register Paper ID - 206742
Title: PACKAGING DESIGN: MATERIALS AND INNOVATIONS USED IN FOOD PACKAGING
Author Name(s): Versha Devi
Publisher Journal name: IJCRT
Volume: 9
Issue: 5
Pages: a864-a875
Year: May 2021
Downloads: 1242
Food packaging has progressed from being just a package for food to one that will now actively influence food safety. Many packets are only just cans, but they have properties designed to secure the food. This involves oxygen, moisture, and taste barriers. The aim of this paper is to address the importance of understanding customer expectations in order to properly design product packaging and achieve the desired role in the minds of customers. Consumers have shown common interpretations of product packaging techniques, showing that a common understanding of what a specific packaging entails remains. As a result, public opinion should guide packaging designers in meeting customers' needs. Food packaging helps protect foods against physical, chemical, and environmental factors that could possibly contaminate all of the food if not packaged correctly.
Licence: creative commons attribution 4.0
bundling, product positioning, consumer behaviour, product.
Paper Title: MULTI DISEASE PREDICTION MODEL USING MACHINE LEARNING
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2105095
Register Paper ID - 206591
Title: MULTI DISEASE PREDICTION MODEL USING MACHINE LEARNING
Author Name(s): RIDHAM SHARMA, MOHIT SHARMA, ARJUN CHAUDHARY, ANMOL SINGH, SURBHI
Publisher Journal name: IJCRT
Volume: 9
Issue: 5
Pages: a858-a863
Year: May 2021
Downloads: 1234
In this advanced world, data is a resource, and tremendous data was creating altogether fields. Data in the medical care industry comprises patient data and infection-related data. This clinical data and AI method will assist us with examining a lot of data to discover the secret examples in the infection, to give customized treatment to the patient, and used to foresee the illness. In this work, an overall design has proposed for foreseeing the sickness in the medical services industry. This framework was tested utilizing with decreased set highlights of Constant Heart and cancer disease dataset utilizing improved AI prediction strategy consist of AI methods, for example, Knn neighbors classifier, Random Forrest Classifier in PhyCharm From the output results, knn neighbors classifier and random Forrest produce accuracy as 95% and 89% in the Breast Cancer and Heart Disease dataset respectively.
Licence: creative commons attribution 4.0
Random forest ,Knn neighbors classifier , Data analytic , Breast Cancer , Heart disease Clinical data analytics , Healthcare analytics
Paper Title: CUBE RUN 3D DEVELOPMENT USING UNITY GAME ENGINE
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2105094
Register Paper ID - 206220
Title: CUBE RUN 3D DEVELOPMENT USING UNITY GAME ENGINE
Author Name(s): Arimardan Singh Yadav, Karan Rawat, Pinni Dheeraj, Aniket Kumar
Publisher Journal name: IJCRT
Volume: 9
Issue: 5
Pages: a855-a857
Year: May 2021
Downloads: 1310
In this paper, we are going to provide the design and implementation for the game name Cube run. It is simple game with basic functionality and will work on different operating system. Our project mainly focus on improving the focus of the students. The player can play as long as they are able to escape the obstacle of scenes that are developed with Unity3D Game Engine and Blender.
Licence: creative commons attribution 4.0
Unity Game Engine, Blender, Code Run, Education
Paper Title: AN OVERVIEW OF SOCIAL MEDIA MARKETING AND THE CHALLENGES AND OPPORTUNITIES OF SOCIAL MEDIA MARKETING IN ONLINE TRAVEL INDUSTRY
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2105093
Register Paper ID - 206566
Title: AN OVERVIEW OF SOCIAL MEDIA MARKETING AND THE CHALLENGES AND OPPORTUNITIES OF SOCIAL MEDIA MARKETING IN ONLINE TRAVEL INDUSTRY
Author Name(s): Nishma Shah, Dr. Darshana Dave
Publisher Journal name: IJCRT
Volume: 9
Issue: 5
Pages: a845-a854
Year: May 2021
Downloads: 1302
While Web 2.0 refers to the technological foundations of the Web, such as programming languages as well as protocols, social media corresponds to the websites and networks that produce and distribute content. Thus, social media are therefore Web-based applications built on the conceptual and technical foundations of Web 2.0 that allow the production and easy dissemination of knowledge. User-generated content (UGC) or consumer-generated media refers to the text, photographs, videos, and audio files created and posted via social media (CGM). Social media marketing is described as the practise of promoting a company and its products through social media channels. The primary difference is that the marketing message audience not only consumes but also actively contributes to the production of marketing content. Since opinions/reviews make up a significant portion of consumer-generated content, reputation management is important for social media marketing. Because of the emphasis on conversation and reputation, social media marketing is somewhat similar to public relations. As a result, rather than serving as a replacement, social media marketing strategies should be perceived holistically and as complementary extensions of other marketing activities.
Licence: creative commons attribution 4.0
Social media marketing, User-generated content, Online travel industry
Paper Title: AN EXPERIMENTAL STUDY ON USE OF NANO SILICA POWDER AS PARTIAL REPLACEMENT OF CEMENT IN CEMENT CONCRETE
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2105092
Register Paper ID - 206794
Title: AN EXPERIMENTAL STUDY ON USE OF NANO SILICA POWDER AS PARTIAL REPLACEMENT OF CEMENT IN CEMENT CONCRETE
Author Name(s): AMBUJ GROVER, RAKESH KUMAR PANDEY, ABHISHEK SINGH
Publisher Journal name: IJCRT
Volume: 9
Issue: 5
Pages: a833-a844
Year: May 2021
Downloads: 1256
Nanotechnology is emerging as the most active research field which is widely being used in all the industries now days all over the world. Since concrete is most common material used in construction industry it is important to advance its strength and workability characteristics. By addition of Nano silica powder it has shown immense improvement in concrete characteristics like strength and workability. The use of Nano silica powder in concrete as a partial replacement of cement not only protects the environmental pollution by decreasing the waste material and CO2 emission but also save the resources and energy. Here we studied the effect of Nano-silica powder on various properties of concrete like compressive strength and split tensile strength by replacing it with cement in various percentages of Nano silica powder. Test samples S1, S2, S3, S4, S5, S6, S7 were prepared by using Nano-Silica powder as a partial replacement for cement in different ranges of 0%, 0.5%, 1%, 1.5%, 2%, 2.5% and 3% by weight of cement for M20 mix of ratio 1:1.5:3(Cement : sand : aggregate). Forty two concrete cubes and cylinders were casted on which different Laboratory tests were conducted to determine the Workability, Compaction Factor, Compressive Strength and Split Tensile Strength of Nano-silica concrete at the age of 7 and 28 days. Results designate that by using small amount of Nano silica powder increases the strength and workability properties of concrete in comparison with conventional concrete.
Licence: creative commons attribution 4.0
Nanotechnology, Nano Silica Powder, Compressive Strength, Workability, Compaction Factor, Split Tensile Strength
Paper Title: EPIDEMIOLOGICAL PROFILE OF IMPORT MALARIA IN THE AREA LAAYOUNE SAKIA HAMRA
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2105091
Register Paper ID - 206797
Title: EPIDEMIOLOGICAL PROFILE OF IMPORT MALARIA IN THE AREA LAAYOUNE SAKIA HAMRA
Author Name(s): Tahiri zakaria, Kassal ghizlane, Jawad el azhari, Adil zegmout, Abedelhak saber
Publisher Journal name: IJCRT
Volume: 9
Issue: 5
Pages: a828-a832
Year: May 2021
Downloads: 1257
Licence: creative commons attribution 4.0
epidemiology; imported malaria; Army; chemoprophylaxis ; Laayoune; Morocco
Paper Title: REQUIREMENTS FOR ADMISSIBILITY OF ELECTRONIC EVIDENCE
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2105090
Register Paper ID - 206696
Title: REQUIREMENTS FOR ADMISSIBILITY OF ELECTRONIC EVIDENCE
Author Name(s): Snigdha Mohapatra
Publisher Journal name: IJCRT
Volume: 9
Issue: 5
Pages: a821-a827
Year: May 2021
Downloads: 1320
With the advent of technology our day-to-day lives have undergone enormous changes. The 21st century has been nothing less of a technological revolution and the tremendous rise and development in the field of technology have transposed the means of communication and modes of storing information. While earlier letters and postcards were the only means of communication and written materials were the modes of data storage, increasing reliance is now being placed on electronic means of communication and data storage such as emails, mobile phones, computers, tape recorders, etc. This advancement in technology has led to changes in the legal system especially in the law of evidence as new materials have been generated in the form of electronic evidence which need to be considered as valid evidence admissible in a Court of law. Thus it resulted in the culmination of the Information Technology Act, 2000 and subsequent changes in The Indian Evidence Act, 1872 .
Licence: creative commons attribution 4.0
Electronic evidence, admissibility, IT Act, Computer system
Paper Title: TEXT FETCHER APPLICATION FROM IMAGE PROCESSING
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2105089
Register Paper ID - 206687
Title: TEXT FETCHER APPLICATION FROM IMAGE PROCESSING
Author Name(s): Himanshu Komalsingh Pardeshi, Sonali Sathe, Nidhi Ranjan
Publisher Journal name: IJCRT
Volume: 9
Issue: 5
Pages: a814-a820
Year: May 2021
Downloads: 1266
Picture processing is one of the major domains that has seen a boom in recent years. In general, we need sentences and paragraphs in text format for documents. Often the data is in the form of an image, and we need to extract the sentences from the image data. This requires us to retype the entire data set based on what we see in the picture, which makes the job even more boring. To solve this issue, we'll create a graphical user interface framework that will convert the written text in the image to a text format that can be read. For this, we will use the image processing principle and programming. To retrieve the photo, the application will be granted access to the system's data. The user only needs to open the application and select a picture from a folder containing text. The photo will be scanned and the text in the photo will be translated to actual text format before being opened in a local note editor when it is imported to the application.
Licence: creative commons attribution 4.0
Regarding Image Processing
Paper Title: EFFECT OF LADDER TRAINING AND PLYOMETRIC TRAINING ON AGILITY PERFORMANCE AMONG MEN PLAYERS
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2105088
Register Paper ID - 206765
Title: EFFECT OF LADDER TRAINING AND PLYOMETRIC TRAINING ON AGILITY PERFORMANCE AMONG MEN PLAYERS
Author Name(s): Dr. V.A. Manickam
Publisher Journal name: IJCRT
Volume: 9
Issue: 5
Pages: a809-a813
Year: May 2021
Downloads: 1274
Licence: creative commons attribution 4.0
Ladder training, Plyometric training, Agility
Paper Title: ENHANCING ACADEMIC WRITING USING CURRENT TECHNOLOGIES : LATEX AND OVERLEAF
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2105087
Register Paper ID - 206792
Title: ENHANCING ACADEMIC WRITING USING CURRENT TECHNOLOGIES : LATEX AND OVERLEAF
Author Name(s): Supriya Bhaskar Kuber, Vibhavari Makarand Chatur
Publisher Journal name: IJCRT
Volume: 9
Issue: 5
Pages: a803-a808
Year: May 2021
Downloads: 1318
Good academic writing requires effective planning, drafting, and revision. Academic writing in English is linear, which means it has one central point or theme with every part contributing to the main line of argument, without digressions or repetitions. Its objective is to inform rather than entertain. As well as this it is in the standard written form of the language. There are ten main features of academic writing that are often discussed. Academic writing is to some extent: complex, formal, objective, explicit, hedged, and responsible. It uses language precisely and accurately. It is also well organised and planned. Current technologies like LaTeX and Overleaf online compilers which enhance academic writing.
Licence: creative commons attribution 4.0
Academic writings, Technical writing, LaTeX, Overleaf, Online compilers
Paper Title: URBAN SPRAWL IN MIDNAPORE TOWN: A GEOSPATIAL ANALYSIS
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2105086
Register Paper ID - 206762
Title: URBAN SPRAWL IN MIDNAPORE TOWN: A GEOSPATIAL ANALYSIS
Author Name(s): MUKUL MAITY, DR. SIBA SANKAR SAHU
Publisher Journal name: IJCRT
Volume: 9
Issue: 5
Pages: a793-a802
Year: May 2021
Downloads: 1541
Licence: creative commons attribution 4.0
Paper Title: IN VITRO PROPAGATION FROM LEAF EXPLANTS OF SPONGE GOURD (LUFFA AEGYPTIACA (MILL.) A MEDICINALLY IMPORTANT PLANT
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2105085
Register Paper ID - 206698
Title: IN VITRO PROPAGATION FROM LEAF EXPLANTS OF SPONGE GOURD (LUFFA AEGYPTIACA (MILL.) A MEDICINALLY IMPORTANT PLANT
Author Name(s): Ugandhar.T, Anitha Devi. U, Parvathi.D, Odelu.G
Publisher Journal name: IJCRT
Volume: 9
Issue: 5
Pages: a784-a792
Year: May 2021
Downloads: 1317
Licence: creative commons attribution 4.0
Luffa aegyptiaca Leaf explants, multiple shoot buds, direct regeneration, Growth hormones
Paper Title: THE DEMOCRATIC AND POLITICAL MOBILIZATION OF WOMEN IN AFGHANISTAN
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2105084
Register Paper ID - 206716
Title: THE DEMOCRATIC AND POLITICAL MOBILIZATION OF WOMEN IN AFGHANISTAN
Author Name(s): Wazhmia, Dr. Chaketi Raju
Publisher Journal name: IJCRT
Volume: 9
Issue: 5
Pages: a776-a783
Year: May 2021
Downloads: 1300
Women, as a massive part of society in Afghanistan, were isolated in the strongest possible way in a historical period from 1996 to 2001. Historically, women's movements in Afghanistan in the first and second decades of democracy could be interpreted as a turning point from traditionalism to modernism. But religious fundamentalism, the ideological clashes of the 1980s, and the civil wars shattered women's political dynamism to the point of total deprivation of political and civil rights under the Taliban 1996. The collapse of the Taliban regime in 2001, is known as the beginning of the formation of a new women's political and social movement despite gender discrimination in a patriarchal society has opened a new socio-political window to them.
Licence: creative commons attribution 4.0
Paper Title: ATTITUDE TOWARDS MARRIAGE AND FAMILY ENVIRONMENT AMONG MARRIED AND UNMARRIED WOMEN
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2105083
Register Paper ID - 206752
Title: ATTITUDE TOWARDS MARRIAGE AND FAMILY ENVIRONMENT AMONG MARRIED AND UNMARRIED WOMEN
Author Name(s): SOWNDARYA PRIYA S, Dr. S. GAYATRIDEVI
Publisher Journal name: IJCRT
Volume: 9
Issue: 5
Pages: a719-a775
Year: May 2021
Downloads: 2544
This study is aimed to assess the relationship between the Marital Attitude and Family Environment among Married and Unmarried Women. Two hundred participants consist of 100 married and 100 unmarried women in the age range of 19 to 30 were selected from SNS College of Arts and Science and Pioneer College of Arts and Science, Coimbatore. The participants were administered by Consent Form, Sociodemographic Data, Marriage Attitude Scale and Family Environment Scale. The data was analyzed by using SPSS 16 package. The results showed that there was a significant difference in the levels of attitude towards marriage and family environment among married and unmarried women. There was a significant difference in the marital attitude among married and unmarried women in relation to family type. There was no significant difference in the family environment among married and unmarried women in relation to family type. There was no relationship between attitude towards marriage and family environment among married and unmarried women in respect to area of residence. There was no correlation between attitude towards marriage and family environment among married and unmarried women. There was a significant difference between the specific subscales in the dimensions of family environment.
Licence: creative commons attribution 4.0
Married and Unmarried Women, Family Environment, Marital Attitude
Paper Title: CYBER INTRUSION IN INDIA; CHALLENGES AND SOLUTIONS
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2105082
Register Paper ID - 206744
Title: CYBER INTRUSION IN INDIA; CHALLENGES AND SOLUTIONS
Author Name(s): Samridhi Sharma
Publisher Journal name: IJCRT
Volume: 9
Issue: 5
Pages: a710-a718
Year: May 2021
Downloads: 1265
Licence: creative commons attribution 4.0
Cyber Space, Cyber Crime, Hacking, Intellectual Property Rights, Information Technology Act,2000.
Paper Title: AT YOUR MERCY
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2105081
Register Paper ID - 206789
Title: AT YOUR MERCY
Author Name(s): Reshma Anil Kumar
Publisher Journal name: IJCRT
Volume: 9
Issue: 5
Pages: a705-a709
Year: May 2021
Downloads: 1280
??? ??? ???? ?? ???? ?? ?? ??? ? ?? ?? ???? ???? ?
Licence: creative commons attribution 4.0
The International Journal of Creative Research Thoughts (IJCRT) aims to explore advances in research pertaining to applied, theoretical and experimental Technological studies. The goal is to promote scientific information interchange between researchers, developers, engineers, students, and practitioners working in and around the world.
Indexing In Google Scholar, ResearcherID Thomson Reuters, Mendeley : reference manager, Academia.edu, arXiv.org, Research Gate, CiteSeerX, DocStoc, ISSUU, Scribd, and many more International Journal of Creative Research Thoughts (IJCRT) ISSN: 2320-2882 | Impact Factor: 7.97 | 7.97 impact factor and ISSN Approved. Provide DOI and Hard copy of Certificate. Low Open Access Processing Charges. 1500 INR for Indian author & 55$ for foreign International author. Call For Paper (Volume 12 | Issue 6 | Month- June 2024)