ISSN Approved Journal No: 2320-2882 | Impact factor: 7.97 | ESTD Year: 2013
Scholarly open access journals, Peer-reviewed, and Refereed Journals, Impact factor 7.97 (Calculate by google scholar and Semantic Scholar | AI-Powered Research Tool) , Multidisciplinary, Monthly, Indexing in all major database & Metadata, Citation Generator, Digital Object Identifier(DOI)
IJCRT Journal front page | IJCRT Journal Back Page |
Paper Title: WIND TURBINE BLADE DESIGN
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2104269
Register Paper ID - 205793
Title: WIND TURBINE BLADE DESIGN
Author Name(s): Satish Hiremath, Dhanya Prakash R Babu
Publisher Journal name: IJCRT
Volume: 9
Issue: 4
Pages: 2102-2127
Year: April 2021
Downloads: 1277
A detailed review of the current state-of-art for wind turbine blade design is presented, including theoretical maximum efficiency, propulsion, practical efficiency, HAWT blade design, and blade loads. The review provides a complete picture of wind turbine blade design and shows the dominance of modern turbines almost exclusive use of horizontal axis rotors. The aerodynamic design principles for a modern wind turbine blade are detailed, including blade plan shape/quantity, aerofoil selection and optimal attack angles. A detailed review of design loads on wind turbine blades is offered, describing aerodynamic, gravitational, centrifugal, gyroscopic and operational conditions.
Licence: creative commons attribution 4.0
wind turbine; blade design; Betz limit; blade loads; aerodynamic
Paper Title: PROFORMA FOR REGISTRATION OF SUBJECTS FOR DISSERTATION
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2104268
Register Paper ID - 205753
Title: PROFORMA FOR REGISTRATION OF SUBJECTS FOR DISSERTATION
Author Name(s): Dr. Nandan kumar. N.M, Dr.Raghunath.N
Publisher Journal name: IJCRT
Volume: 9
Issue: 4
Pages: 2092-2101
Year: April 2021
Downloads: 1222
The purpose of acid etching is to remove the smear layer and create a rough surface by mixing hydroxyapatite crystals on the outer surface. This topography will facilitate penetration of the fluid adhesive components into the depressions created; hence the adhesive gets locked into the surface and contributes to micromechanical retention. If a laser can achieve the above-mentioned function of acid etching, and even produce a desirable surface for bonding to a restorative material, it may be a viable alternative to acid etching. The purpose of this study was to compare the bond strengths after acid etching with conventional primers, acid etching with moisture insensitive primers, laser etchants with conventional primers and laser etchants with moisture insensitive primers
Licence: creative commons attribution 4.0
Acid etching, laser etching, moisture insensitive primers
Paper Title: NATRIUM MURIATICUM AS CONSTITUTIONAL MEDICINE IN CASE OF PITYRIASIS ALBA IN PEDIATRIC AGE GROUP
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2104267
Register Paper ID - 205242
Title: NATRIUM MURIATICUM AS CONSTITUTIONAL MEDICINE IN CASE OF PITYRIASIS ALBA IN PEDIATRIC AGE GROUP
Author Name(s): Dr Priyanka singh, Dr Jasmeet patel, Dr Debjani debnath
Publisher Journal name: IJCRT
Volume: 9
Issue: 4
Pages: 2088-2091
Year: April 2021
Downloads: 1259
Pityriasis alba is a common fungal infection of the skin in tropical region. The characteristic lesions are small yellowish-brown macules. These slowly blend to from large disfiguring area. Concomitant hypopigmentation is usual. Most of us get confused in diagnosing pityriasis in an initial year of practice and thus we need to know the differentiating characteristics of condition. However, treatment can be possible of the homoeopathic medicine through proper repertorization and totality of symptom. A 14-year boy came to OPD with complaint of white rounded patch on right cheek and forehead from last 3 months. Appearance of the patches are lighter than the surrounding skin. Headache aggravate from heat of sun and ameliorate from cold things.
Licence: creative commons attribution 4.0
: Homoeopathy, pityriasis alba, white pigmentation, constitutional homoeopathic medicine, natrium muriaticum, synthesis repertory radar 10
Paper Title: AN EFFECTIVE METHODOLOGY FOR COLOR CHANGE DETECTION USING MSE AND SSIM
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2104266
Register Paper ID - 205320
Title: AN EFFECTIVE METHODOLOGY FOR COLOR CHANGE DETECTION USING MSE AND SSIM
Author Name(s): Alavala Satyanadh Reddy, Anshuman Behera, Debesh Kumar Pradhan
Publisher Journal name: IJCRT
Volume: 9
Issue: 4
Pages: 2077-2087
Year: April 2021
Downloads: 1334
: The trustworthiness of digital images is a significant concern since images can be created easily as a outcome of the excessive schedule of advanced image forgery devices. Thus advanced image authentication is necessary as well as it is the contemporary research study area which expects to confirm the credibility of digital images. This study tries to provide a recap of countless advaced image imitations as well as passive techniques to confirm digital images. This study tries to cover the blind methods that have actually been recommended for subjecting bogus. This job emphasizes the detection methods for recolouring the image, minor changes in the image and any other forgery works
Licence: creative commons attribution 4.0
: Digital image, Image authentication, Image forger
Paper Title: REVIEW OF AGRICULTURAL DEVELOPMENT AND EMPLOYMENT GENERATION IN NIGERIA: ISSUES, CHALLENGES AND THE WAY FORWARD
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2104265
Register Paper ID - 205600
Title: REVIEW OF AGRICULTURAL DEVELOPMENT AND EMPLOYMENT GENERATION IN NIGERIA: ISSUES, CHALLENGES AND THE WAY FORWARD
Author Name(s): Obakiri, Precious Pohm
Publisher Journal name: IJCRT
Volume: 9
Issue: 4
Pages: 2066-2076
Year: April 2021
Downloads: 1329
This study is a theoretical paper aimed at looking at issues, challenges and the way forward concerning agricultural development and employment generation in Nigeria. Nigeria as an economy is endowed with too many resources both human and natural. Yet there is still threat of poverty, starvation, insecurity and unemployment. The unemployment rate is so alarming that between the periods of 2010 and 2019 the rate stood at 5% and 23.1% and a projected 33.5 in 2020. This is a worrisome status as Nigeria serves as the global poverty capital with the incidences of high prevalence of crime rate, murders, kidnappings, militancy, armed robbery, drug abuse and many other vices. To combat this menace calls for urgent attention. It is in the light of the above this study is carried out to access the level of development in the agricultural sector and unraveling the potentials and capacity of the Nigeria agricultural sector if properly developed in generating jobs for the millions of people (Nigerians) without jobs. However, in the course of this study, poor agricultural funding, poor and lack of farm inputs, inconsistent and no sustained policy and programmes for the sector, lukewarm and lackadaisical attitude of political leaders and neglect of agricultural research institutes are seen as some major issues hampering the development of the agricultural sector in Nigeria, Furthermore, the study revealed that the agricultural sector is the most critical sector that has the potential to industrialize Nigeria, reduce poverty, increase food security and create jobs for the massive unemployed population. The study concludes that the development of agricultural sector is still at its infant age despite the numerous policy efforts of successive government to develop the sector. Therefore, it is suggest that the only way forward for Nigeria agricultural sector to drive industrialization, guarantee food security and employment generation is by total and massive investment in the sector, budgetary allocation to the sector should be increased by 10% to meet 2003 African Union Summit in Maputo and the right policy and programmes put in place, sustained and managed by patriotic states men and women for the benefit of all.
Licence: creative commons attribution 4.0
Agricultural Development, Budget Allocation, Employment Generation, Nigeria
Paper Title: PROBLEMS OF ELDERLY TRIBAL WOMEN IN PRAKASAM DISTRICT OF ANDHRA PRADESH
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2104264
Register Paper ID - 205438
Title: PROBLEMS OF ELDERLY TRIBAL WOMEN IN PRAKASAM DISTRICT OF ANDHRA PRADESH
Author Name(s): M. Srinivas, DR PILLI VENKATA RAO
Publisher Journal name: IJCRT
Volume: 9
Issue: 4
Pages: 2057-2065
Year: April 2021
Downloads: 1255
The problems which are related to our basic needs may be common. But certain problems are specific to ageing. But while ageing has a charming beginning in the form of development (i.e. growth and differentiation), it has a dismal end marked by senescence, loss of adaptability of the organism to its extrinsic and intrinsic environments, decrepitude and ultimately the macabre death.
Licence: creative commons attribution 4.0
Adaptability, Development, Organism
Paper Title: ON GPR-COMPACTNESS IN TOPOLOGICAL SPACES
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2104263
Register Paper ID - 205641
Title: ON GPR-COMPACTNESS IN TOPOLOGICAL SPACES
Author Name(s): Dattatreya Hegde, Mahesh Bhat
Publisher Journal name: IJCRT
Volume: 9
Issue: 4
Pages: 2053-2056
Year: April 2021
Downloads: 1273
The purpose of this paper to introduce a new class of continuous functions like GPR- compactness functions and study some of their properties.
Licence: creative commons attribution 4.0
GPR-continuity, gpr-continuity, gpr-continuous, ect.
Paper Title: SENSING AND TRACKING OF A MOVING OBJECT
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2104262
Register Paper ID - 205180
Title: SENSING AND TRACKING OF A MOVING OBJECT
Author Name(s): Ms. S. Pushpavalli, Ms. C. Abirami
Publisher Journal name: IJCRT
Volume: 9
Issue: 4
Pages: 2050-2052
Year: April 2021
Downloads: 1212
Wireless location is defenceless to malevolent assault owing to the scenery of its unlocking intermediate. These lessons propose an attack-resistant fingerprinting localization algorithm bottom on a probabilistic comprehensive disjunction representation. This representation allows an assault surveillance to play a fewer momentous role throughout the localization procedure, thus attain additional healthy position opinion beneath safety intimidation. This learns built-in experiment conduct in a real Wi-Fi system. Untried consequences well-known that this move toward them says that achieve more robust judgment than cluster-based, median-based, and sensor-selection technique beneath a mixture of show aggression on RSS.
Licence: creative commons attribution 4.0
Soil moisture, Water wastage, temperature, water pump.
Paper Title: RESEARCH ON AUTOMATIC WATER TAP CONTROL SYSTEM
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2104261
Register Paper ID - 205181
Title: RESEARCH ON AUTOMATIC WATER TAP CONTROL SYSTEM
Author Name(s): Ms. M. Saritha, Ms. U. Abinaya
Publisher Journal name: IJCRT
Volume: 9
Issue: 4
Pages: 2047-2049
Year: April 2021
Downloads: 1428
Licence: creative commons attribution 4.0
IR transmitter, Receiver circuit, Control Unit, Solenoid Valve.
Paper Title: SPICES AS PLANT PROTECTANT
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2104260
Register Paper ID - 205711
Title: SPICES AS PLANT PROTECTANT
Author Name(s): Sanjay Prajapati, Shilpa Rathod, R. K. Jat
Publisher Journal name: IJCRT
Volume: 9
Issue: 4
Pages: 2042-2046
Year: April 2021
Downloads: 1316
The effect of doses of black pepper, black cumin, garlic and methi powder against pulse beetle and recorded the highest adult mortality (83%), lowest number of eggs (42%), numbers of adult emergence (11.11%) and amount of weight loss (29.00 %) when gram seeds were treated with black pepper powder at 1.00 g/kg. The efficacy of four plant extracts viz., Clove, Sehjan, Ajwain and Ginger against Fusarium solani at 10%, 25% and 50% concentrations. Among all four plant extracts tested, Clove was found to be most effective against Fusarium solani on Third, Fifth and Seventh day at 50% concentration and conquered the colony growth by 100% compared to control. Different bacterial species and the amount of clove oil used and observed that Ralstonia solanacearum was the most sensitive when 50 ?l of clove oil was used in our agar diffusion assay. Tomato and Geranium plants grown in R. solanacearum-infested soils pre-treated with 0.5% clove oil were significantly taller and produced significantly more root and above-ground plant tissues than their untreated control. Geranium plants grown in R. solanacearum-infested soils treated with 0.5% clove oil produced similar number of flowering stalks to those in bacterium-free soil with or without clove oil treatment.
Licence: creative commons attribution 4.0
Pulse beetle, Fusarium Solani, Ralstonia solanacearum and Mortality
Paper Title: SECURE AND ADVANCED VULNERABILITY ANALYSIS FOR THE AUTHENTICATION
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2104259
Register Paper ID - 205605
Title: SECURE AND ADVANCED VULNERABILITY ANALYSIS FOR THE AUTHENTICATION
Author Name(s): Bojja narsimha Reddy, G.Gopal
Publisher Journal name: IJCRT
Volume: 9
Issue: 4
Pages: 2031-2041
Year: April 2021
Downloads: 1235
Licence: creative commons attribution 4.0
Blended System Nash Harmony (MSNE), Long Short Term Memory (LSTM), Online Devices (OD
Paper Title: A SURVEY ON DIABETES AND HEART DISEASE PREDICTION USING DATA MINING TECHNIQUES
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2104258
Register Paper ID - 205589
Title: A SURVEY ON DIABETES AND HEART DISEASE PREDICTION USING DATA MINING TECHNIQUES
Author Name(s): Tintu George, Dr.A.Hema
Publisher Journal name: IJCRT
Volume: 9
Issue: 4
Pages: 2027-2030
Year: April 2021
Downloads: 1292
Diabetes is a group of metabolic diseases that is due to a high level of sugar in the blood for a long period of time. People with diabetes are also more likely to have many other conditions to raise the risk of heart disease. Diabetes and heart disease are the two most complex diseases that are globally affecting many peoples in society. According to WHO, the report says the diabetes patients list has been increasing day by day and due to diabetes 1.6 million deaths was caused in the year 2016 and by 2030 approximately 700 million peoples will be affected by diabetes worldwide. Therefore early prediction of diabetes is very necessary for that Data mining has played a main role in the field of diabetes and heart disease research. The main objective of this paper is to predict diabetes and heart disease which help doctors and many other medical practitioners to predict the disease before it occurs.
Licence: creative commons attribution 4.0
Data mining, Diabetes, Heart disease prediction
Paper Title: QUALITATIVE RISK ANALYSIS AND RISK RESPONSE PLANNING FOR CONSTRUCTION PROJECT
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2104257
Register Paper ID - 205844
Title: QUALITATIVE RISK ANALYSIS AND RISK RESPONSE PLANNING FOR CONSTRUCTION PROJECT
Author Name(s): Mr. Sujeet P. Borole, Prof. P. M. Attarde
Publisher Journal name: IJCRT
Volume: 9
Issue: 4
Pages: 2007-2026
Year: April 2021
Downloads: 1312
Projects within the development sector is characterized as fragmented, temporary and sophisticated which inherently brings upon risk exposure. Decision makers within the industry need reliant access to information and knowledge so as to manage risks during a sufficient and systematic way. Thus, the implementation of an efficient risk management in reference to managing associated project risk knowledge may facilitate successful construction project endeavors. The purpose of this master thesis is to explore and evaluate project risk management within the Swedish housing industry, with the stress on the attitude of Swedish contractors. The aim is to look at the popularity and practical adoption of risk management so as to investigate how project knowledge is employed within the process. The methodology consists of a literature review on risk management fundamentals, the various risk attitudes and knowledge management in reference to risk. Data collection and analysis are based on a mixed method approach during which conclusions are made in reference to theoretical groundwork. The empirical data is collected through the usage of a web survey and in-depth semi structured interviews with key professionals within the Swedish housing industry. The results from this research indicate that theoretical models and processes for risk management is fairly unknown within the industry, analogous methods are used within respective organizations but the sharing of definitions and ideas within the industry are absent and therefore the methods aren't as structured as described in risk management theory. However, findings suggest that the perception of actors within the industry regarding risk and therefore the risk management process is one among high importance for obtaining project objectives. Furthermore, findings indicate that the interplay between knowledge- and risk management and therefore the incorporation of those processes is underutilized among the contractors and developers.
Licence: creative commons attribution 4.0
Risk Management, Qualitative Risk, Quantitative Risk, Construction Projects, Knowledge Management. Management
Paper Title: SYNCHRONISING GENETIC BODY CLOCKS TO CIRCADIAN RHYTHMS AND ULTRADIAN RHYTHMS FOR OBTAINING HIGHEST PERFORMANCE IN LIFE USING WEARABLE TECHNOLOGY
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2104256
Register Paper ID - 205796
Title: SYNCHRONISING GENETIC BODY CLOCKS TO CIRCADIAN RHYTHMS AND ULTRADIAN RHYTHMS FOR OBTAINING HIGHEST PERFORMANCE IN LIFE USING WEARABLE TECHNOLOGY
Author Name(s): Mr. Saurabh Mahendra Jadhav, Ms. Prachi Rajendra Rokade, Ms. Manisha Ramsamuj Yadav, Mr. Mahendra Patil
Publisher Journal name: IJCRT
Volume: 9
Issue: 4
Pages: 2002-2006
Year: April 2021
Downloads: 1263
Licence: creative commons attribution 4.0
Circadian Rhythms, Ultradian Rhythms, Genetic Body Clocks, Wearable Technology, Life Science
Paper Title: EDUCATIONAL AND SPIRITUAL JOURNEY OF A MARGINALIZED WOMAN IN BAMA'S AUTOBIOGRAPHICAL NOVEL KARUKKU
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2104255
Register Paper ID - 205799
Title: EDUCATIONAL AND SPIRITUAL JOURNEY OF A MARGINALIZED WOMAN IN BAMA'S AUTOBIOGRAPHICAL NOVEL KARUKKU
Author Name(s): Dr. Gulab Dhar
Publisher Journal name: IJCRT
Volume: 9
Issue: 4
Pages: 1997-2001
Year: April 2021
Downloads: 1362
Licence: creative commons attribution 4.0
Keywords: marginalized, poverty, discrimination, oppressed.
Paper Title: FOREST FIRE DETECTION USING R PROGRAMMING
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2104254
Register Paper ID - 205780
Title: FOREST FIRE DETECTION USING R PROGRAMMING
Author Name(s): Shymali J, Dinesh Kumar R, Thahira Banu V
Publisher Journal name: IJCRT
Volume: 9
Issue: 4
Pages: 1992-1996
Year: April 2021
Downloads: 1524
Licence: creative commons attribution 4.0
Forest fire, latitude, longitude, temperature, R tool
Paper Title: SELECTION OF OPTIMIZED PROPORTION OF RECYCLED CONCRETE AGGREGATES AND BLAST FURNACE SLAG AS GRANULAR SUB BASE MATERIAL USED IN PAVEMENT
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2104253
Register Paper ID - 205782
Title: SELECTION OF OPTIMIZED PROPORTION OF RECYCLED CONCRETE AGGREGATES AND BLAST FURNACE SLAG AS GRANULAR SUB BASE MATERIAL USED IN PAVEMENT
Author Name(s): Vijay Sheel Mishra, Prof. Sanjay Saraswat, Dr. Pramod Sharma
Publisher Journal name: IJCRT
Volume: 9
Issue: 4
Pages: 1984-1991
Year: April 2021
Downloads: 1240
Due to rapid industrialization, the waste products are also being generated in huge quantity which occupies large quantity of precious land as well as creating environmental problems. Recycled Concrete Aggregates (RCA) which is generated as a part of Construction and Demolition material is a type of waste product. In the same way, Blast furnace slag is also a waste product of steel production. As the construction of pavements requires a massive amount of aggregates, the replacement of part of fresh aggregates with mixture of Recycled Concrete Aggregates (RCA) and Blast furnace slag will be very advantageous considering the dearth of fresh aggregates. Therefore, an attempt has been made in the present study to determine the optimum proportion of Recycled Concrete Aggregates (RCA) and Blast furnace slag as Base material in pavement. The main objective of the study is to select the best possible percentage to increase the bearing capacity of sub base granular layer. The cost of construction of the pavement is considerably decreases if locally available low cost materials are used in the construction of sub base, sub grade etc. The design of pavement is based on the minimum specified structural quality of the soil that will be achieved for each layer of material. Each layer must resist shearing and avoid too many deflections that cause fatigue. It is also used to decrease the compressibility and permeability of the soil mass and to increase its shear strength. As the quality of the soil is increased, the ability to distribute the load is increased so that a drop in the thickness of the soil is also permitted. Use of by- products is also a way to protect environment from the harmful effects of recycled aggregates and blast furnace slag as they are required to be dumped in open grounds or beneath the surface which affects the natural formation of the soil and degrades the surface. In this research various laboratory tests like atterberg limits, proctor test and CBR i.e California bearing ratio test is performed and the best possible combination of the required proportion is selected.
Licence: creative commons attribution 4.0
Recycled Concrete Aggregates (RCA), Blast furnace slag, CBR, Granular Sub base (GSB), Atterberg limits
Paper Title: RECENT TRENDS IN RECRUITMENT WITHIN PRIVATE ORGANIZATIONS
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2104252
Register Paper ID - 205786
Title: RECENT TRENDS IN RECRUITMENT WITHIN PRIVATE ORGANIZATIONS
Author Name(s): Miss. Nidhi Pandya, Dr. Rajnikant Parmar
Publisher Journal name: IJCRT
Volume: 9
Issue: 4
Pages: 1979-1983
Year: April 2021
Downloads: 1228
Gone were the days where the traditional technique of recruitment would suffice to appoint potential talents. But, for a long time, the recruitment system has witnessed a sea of alternate due to the introduction of the web and its proliferation. Earlier the organization had the power all through the job search, however in the current trend; candidates have a ways greater power in the course of the job search. The potential candidates had been viewed to be the employee in the past, however, the whole center of attention has modified and the candidates are being handled as customers. This dramatic change is all due to the altering phenomena of the web and its tremendous coverage in growing countries.
Licence: creative commons attribution 4.0
Recruitment, Human Resources Management, Recent Trends
Paper Title: Wireless Application Protocol
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2104251
Register Paper ID - 205785
Title: WIRELESS APPLICATION PROTOCOL
Author Name(s): Khushbu Alpeshbhai Soni, Khyati Devendra Kumar Patel, Prof. Kaushal Gor.
Publisher Journal name: IJCRT
Volume: 9
Issue: 4
Pages: 1974-1978
Year: April 2021
Downloads: 1391
Licence: creative commons attribution 4.0
Wireless Application Protocol, communication protocol, Internet Protocol, Mark-up Language
Paper Title: ANALYSIS ON SURFACE ROUGHNESS OF ALUMINIUM IN ABRASIVE WATER JET CUTTING
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT2104250
Register Paper ID - 204923
Title: ANALYSIS ON SURFACE ROUGHNESS OF ALUMINIUM IN ABRASIVE WATER JET CUTTING
Author Name(s): BHAVIN P MISTRY
Publisher Journal name: IJCRT
Volume: 9
Issue: 4
Pages: 1965-1973
Year: April 2021
Downloads: 1241
Abrasive Water Jet is an innovation process which proves to be a good solution for cutting, drilling, polishing for various materials. Abrasive Water Jet Machining is extensively used in many industrial applications. Abrasive Water Jet Machine is non-conventional machining process. The material removal process in mainly by erosion where material removal rate by impact of high pressure, high velocity of water and high girt abrasive. In work piece now there are many parameters affect in machined surface to be cut by abrasive water jet machine. The effect of material thickness, traverse speed and abrasive mass flow rate during abrasive water jet cutting of aluminium on surface roughness were investigated. Surface roughness was measured across of depth of cut. The experimental results show that poor surface roughness at bottom of cut. Based on the experiments the optimal process parameters for each material thickness were defined.
Licence: creative commons attribution 4.0
Abrasive water jet machining, Process parameter, Surface Roughness.
The International Journal of Creative Research Thoughts (IJCRT) aims to explore advances in research pertaining to applied, theoretical and experimental Technological studies. The goal is to promote scientific information interchange between researchers, developers, engineers, students, and practitioners working in and around the world.
Indexing In Google Scholar, ResearcherID Thomson Reuters, Mendeley : reference manager, Academia.edu, arXiv.org, Research Gate, CiteSeerX, DocStoc, ISSUU, Scribd, and many more International Journal of Creative Research Thoughts (IJCRT) ISSN: 2320-2882 | Impact Factor: 7.97 | 7.97 impact factor and ISSN Approved. Provide DOI and Hard copy of Certificate. Low Open Access Processing Charges. 1500 INR for Indian author & 55$ for foreign International author. Call For Paper (Volume 12 | Issue 7 | Month- July 2024)