ISSN Approved Journal No: 2320-2882 | Impact factor: 7.97 | ESTD Year: 2013
Scholarly open access journals, Peer-reviewed, and Refereed Journals, Impact factor 7.97 (Calculate by google scholar and Semantic Scholar | AI-Powered Research Tool) , Multidisciplinary, Monthly, Indexing in all major database & Metadata, Citation Generator, Digital Object Identifier(DOI)
IJCRT Journal front page | IJCRT Journal Back Page |
Paper Title: INCREASING FURNACE EFFICIENCY AND POLYMER QUENCHING PROCESS
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT1813669
Register Paper ID - 186226
Title: INCREASING FURNACE EFFICIENCY AND POLYMER QUENCHING PROCESS
Author Name(s): Kedar Yeole, Jitendrakumar Ramasare Pal, Mangesh Subhash Deokar3, Ajeet Deepak Jadhav, Narendra Bhimrao Ahire
Publisher Journal name: IJCRT
Volume: 6
Issue: 2
Pages: 318-321
Year: APRIL 2018
Downloads: 1123
We are working on this project in Hindustan Forging and Steel Industry, Wagle Estate, Thane (West), were heat treatment process are carried out on various steel shafts, gear blanks and square blocks which are used by various companies. There are various furnace of different size are on shop floor of company for heating purpose in heat treatment process. We are study on a furnace to increase their efficiency for better utilization of fuel (gas as fuel). There are some methods we were going to focus to increasing efficiency of furnace are as follows: i. Selection of Blower, ii. Selection of Refractory, iii. Insulation , iv. Recuperator for utilization of exhaust gas leaving from furnace (Heat Exchanger). Also to increase efficient process of polymer quenching by suggesting best polymer for better quenching and better maintaining physical properties of material.
Licence: creative commons attribution 4.0
Insulation,Refractory,Recuperater(Heat Exchanger),Polymer Quenching
Paper Title: BENDING ANALYSIS OF SIMPLY SUPPORTED THIN CIRCULAR METAL PLATE UNDER POINT LOAD
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT1813668
Register Paper ID - 186225
Title: BENDING ANALYSIS OF SIMPLY SUPPORTED THIN CIRCULAR METAL PLATE UNDER POINT LOAD
Author Name(s): Pratik Shinde, Manish Jha, Mayur Roge, Ravi Singh, Ansari saad
Publisher Journal name: IJCRT
Volume: 6
Issue: 2
Pages: 315-317
Year: APRIL 2018
Downloads: 1160
Licence: creative commons attribution 4.0
Isotropic circular plate; Finite element method; 4 noded shell 63 element; Multi zone mapped meshing; Free meshing
Paper Title: OIL AND SCRAP SEPARATOR
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT1813667
Register Paper ID - 186224
Title: OIL AND SCRAP SEPARATOR
Author Name(s): ROSHAN PINGULKAR, PRAVIN BHIKALE, SUNNY PRJAPATI, RAHUL SONI
Publisher Journal name: IJCRT
Volume: 6
Issue: 2
Pages: 312-314
Year: APRIL 2018
Downloads: 1203
The main aim of the project is to improvise the quality of scrap and to reduce the time required for separation of scrap and oil so as to consume less time in separation of scrap and to get good value of scrap. As a part of industrial project under the syllabus prescribed for Mechanical Engineering, we as a group are working with collaboration of VERMA ENTERPRISES Pvt. Ltd. The various type of scrap is generated in the company. A new system for separation of scrap & oil tends to improve functionally, longer service life, consumes less time, easy installation, user friendliness and ensuring proper optimization of cost, material, timing as well as the prevention of wastage of oil.
Licence: creative commons attribution 4.0
Centrifugal force, Filter net
Paper Title: MULTI-CUTTER HACKSAW MACHINE
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT1813666
Register Paper ID - 186222
Title: MULTI-CUTTER HACKSAW MACHINE
Author Name(s): Hitesh Balaram Patil, Neel Ramsevak Kushwaha, Ronak Bharat Panchal, AkshayChandrakant Panchal, Mitesh Panchal
Publisher Journal name: IJCRT
Volume: 6
Issue: 2
Pages: 308-311
Year: APRIL 2018
Downloads: 1167
-In this project we are going to design the multi cutter hacksaw machine which helps in cutting four workpieces at a time in industry. This is done with the help of using a motor of 960 rpm two pulleys a belt square pipes vice hacksaw circular rods and hollow pipes and linkages. This machine can be used in the small scale industry to reduce the production time such as cutting the angles, plates, circular rod, woods and aluminium materials etc. This machine works on the principle of scotch yoke mechanism. Which converts the rotary motion of the pulley into linear motion of the linkages and the corresponding hacksaws. This initiative is taken to reduce the cost of production and reduce the time of the operating cycle .The main advantage of this machine is we can adjust no. of working areas in the machince which are going to function, as we are going to provide an arrangement for the cutting hacksaws to disconect the machine which is not in function or the load of production is low .
Licence: creative commons attribution 4.0
A.C Motor of 960 rpm, Hacksaw Blades, Pulley,Vice
Paper Title: CORRELATION OF MICROSTRUCTURE WITH GRAIN SIZE AND HARDNESS OF SINTERED REACTION BONDED SILICON NITRIDE
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT1813665
Register Paper ID - 186221
Title: CORRELATION OF MICROSTRUCTURE WITH GRAIN SIZE AND HARDNESS OF SINTERED REACTION BONDED SILICON NITRIDE
Author Name(s): Mr. Sourabh Gupta, Dr. Brahmaraju Golla, Mr. Abhiram Singhania, Mr. Atul Kumar Choudhary
Publisher Journal name: IJCRT
Volume: 6
Issue: 2
Pages: 303-307
Year: APRIL 2018
Downloads: 1127
Licence: creative commons attribution 4.0
SRBSN, Bimodal micrtostructure, Grain Size, Image Analyzer, Inspector Matrox 2.1 software, Vicker Microhardness.
Paper Title: Use of nonmaterial’s in Computer chips
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT1813664
Register Paper ID - 186219
Title: USE OF NONMATERIAL’S IN COMPUTER CHIPS
Author Name(s): Kiran Tatar , Shamal A.Mali, Leena Bhavsar, Amar Sheikh
Publisher Journal name: IJCRT
Volume: 6
Issue: 2
Pages: 300-302
Year: APRIL 2018
Downloads: 1123
Actually nanotechnology is a very broad area of study and research at present. It has been developed by many researchers and includes several fields of study like physics, chemistry, biology, material science, engineering and computer science, we identify the nanotechnology development community and needs of nanotechnology in the field of computer. This paper give idea about the benefits of nanotechnology using nano tubes in substitute of silicon chip that ever more dense chips that are both faster and more power efficient.
Licence: creative commons attribution 4.0
Advantages, Applications, Literature survey
Paper Title: APPLICATION OF DIGITAL NETWORKING FOR ENABLING TRUST BASED DEMOCRACY
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT1813663
Register Paper ID - 186217
Title: APPLICATION OF DIGITAL NETWORKING FOR ENABLING TRUST BASED DEMOCRACY
Author Name(s): Mohammed Lokhandwala, Rupendra M. Anklekar
Publisher Journal name: IJCRT
Volume: 6
Issue: 2
Pages: 297-299
Year: APRIL 2018
Downloads: 1122
In this paper, the argument has been established that albeit democracy being a great concept, its implementation is flawed and based on rules limited by technology available at the time it was conceptualized and first implemented. The true power of democracy would be achieved if all people are empowered all the time and not just momentarily during elections. This paper attempts to address this by rethinking the implementation of democracy and tries to bring genuine power in the hands of people. This paper explores the concept of trust delegation and chaining, and application of digital networking technology to achieve the goal of bringing true power to the people
Licence: creative commons attribution 4.0
Democracy, Digital Networking, Trust Delegation, Chain of Trust, Digital Technology, Elections, Government, Electorate
Paper Title: NUMERICAL ANALYSIS OF WIND LENSE TURBINE
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT1813662
Register Paper ID - 186216
Title: NUMERICAL ANALYSIS OF WIND LENSE TURBINE
Author Name(s): ATUL CHOUDAHRY, BILAL MERCHANT, OWAIS FAROOQUI, ABDUL KARIM KHAN, UMAIR MAULANA
Publisher Journal name: IJCRT
Volume: 6
Issue: 2
Pages: 292-296
Year: APRIL 2018
Downloads: 1139
This Reasearch paperinvestigates theeffect of wind lensewhich is shrouded diffuser with brim ringat the outlet. The purpose of adding this diffuser-ring configuration is to increase the extractable power of thewind approaching the wind turbine. The essential concept used is enhancing the possibility of the free stream velocity at the rotor in order to extract much larger power by increased velocity at the rotor. This is due to a low-pressure region behind the brim, due to a strong vortex formation, which drew more mass flow to the wind turbine inside the diffuser shroud. A computational study has been carried out in order to assess the effect of brim size and position of the throat on the increase in velocity of the wind.
Licence: creative commons attribution 4.0
Wind Turbine, Wind Lense, diffuser, Brim, Power Augmentation.
Paper Title: DETACHABLE VEHICLE UNIT
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT1813661
Register Paper ID - 186211
Title: DETACHABLE VEHICLE UNIT
Author Name(s): Rajesh Kumar, KUNAL NIKAM, AVINASH PATIL, AKSHAY PATIL, NITIN PARAMANE
Publisher Journal name: IJCRT
Volume: 6
Issue: 2
Pages: 285-291
Year: APRIL 2018
Downloads: 1135
Licence: creative commons attribution 4.0
Standard Brake, Battery, Switch, Adjustment system, Motor, Sprocket.
Paper Title: VIBRATION ANALYSYS OF AUTO RICKSHAW
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT1813660
Register Paper ID - 186209
Title: VIBRATION ANALYSYS OF AUTO RICKSHAW
Author Name(s): Rakesh Poojari, AKHAND CHAUBEY, SHAIKH YUSUF, DEEPAK GUPTA, ASADULLAH KHAN
Publisher Journal name: IJCRT
Volume: 6
Issue: 2
Pages: 281-284
Year: April-2018
Downloads: 1246
In India for short distance transportation people are commonly use Auto rickshaw due to less fair and traffic problems.. The vibration is common in most of the vehicles and it is more in three wheeler vehicles because of its dynamic nature. Waves of energy of vibration transfers into the body of the driver are transmitted through the body tissues, organs and systems of individual causing various effects on the structure within the body before it is dampened and dissipated. The vehicles vibration produces physiological effects on humans. In the present work we modified the driver seat and experimental work is carried to measure the magnitude of vibration produced on driver through FFT analyzer and acceleration level is analyzed and compared with original seat and modified seat at different road profiles (Rough, Bumpy, Urban, Highway) different speed condition (10kmph, 20Kmph, 30Kmph) and different age groups of drivers (30 yrs, 40 Yrs) and Survey has been carried out. As per International Organization of Standard ISO (2631) vibration evaluated with respect to whole body vibration considering frequency 0.5-80 Hz.
Licence: creative commons attribution 4.0
FFT Analyser, ISO(2631), Whole Body Vibration.
Paper Title: MODIFICATION IN BIKE FRONT SUSPENSION SYSTEM
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT1813659
Register Paper ID - 186208
Title: MODIFICATION IN BIKE FRONT SUSPENSION SYSTEM
Author Name(s): Kalpesh Bhoir, Mahendra Achwale, Vikrant Jadhav, Pratik Deshmukh, Mr.Praful Bhendarkar
Publisher Journal name: IJCRT
Volume: 6
Issue: 2
Pages: 277-280
Year: April-2018
Downloads: 1224
Licence: creative commons attribution 4.0
Telescopic Fork, Mono Suspension
Paper Title: RIVER CLEANING SYSTEM
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT1813658
Register Paper ID - 186193
Title: RIVER CLEANING SYSTEM
Author Name(s): Pardeep Kumar1, Kaskar Rabbani, , Khan Razi, Patel Hamzah, Patel Maaz
Publisher Journal name: IJCRT
Volume: 6
Issue: 2
Pages: 272-276
Year: April-2018
Downloads: 1301
Licence: creative commons attribution 4.0
Paper Title: DESIGN AND FABRICATION OF QUAD BIKE
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT1813657
Register Paper ID - 186192
Title: DESIGN AND FABRICATION OF QUAD BIKE
Author Name(s): Rupendra M. Anklekar, Pravin Avhad, Meghraj Sase, Ganesh Shirke, Amol Vekhande
Publisher Journal name: IJCRT
Volume: 6
Issue: 2
Pages: 267-271
Year: April-2018
Downloads: 1209
The objective of our project is to design and fabricate an independent suspension quad bike. It is aimed to simulate a real world engineering design project and meet the associated challenges. It involves thorough planning and manufacturing tasks when introducing a new product to the consumer industrial market. Our primary focus is to design a single sitter high-performance off-road vehicle with independent double wishbone type suspensions that will impart ruggedness for the rough roads and provide with maximum safety and driver comfort. The reverse gear system is also installed in quad bike which provides the comfort to drive the vehicle. Due to use of reverse gear box it is easy to drive vehicle in reverse direction. The design is for safety of driver.
Licence: creative commons attribution 4.0
Quad Bike, Suspension, Reverse Gear System, Power Transmission, Braking System, Shock Absorber, Design, Fabrication
Paper Title: SINGLE SITTER BIRD GLIDER
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT1813656
Register Paper ID - 186191
Title: SINGLE SITTER BIRD GLIDER
Author Name(s): Atul Choudhary, Sandesh Raikwad, Chinmay Purohit, Kailash Salunkhe, Rushikesh Sawant
Publisher Journal name: IJCRT
Volume: 6
Issue: 2
Pages: 258-266
Year: April-2018
Downloads: 1198
Licence: creative commons attribution 4.0
I.C Engine, Propeller, Aerofoil, Lift, Drag, Thrust, Struts, Parachute Fabric
Paper Title: DESIGN OF DRIVER SEAT IN AUTOMOBILE
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT1813655
Register Paper ID - 186190
Title: DESIGN OF DRIVER SEAT IN AUTOMOBILE
Author Name(s): Praful Bhendarkar, Akhilesh Kumar Gupta , Rajesh Kumar , Abhiram Singhaniya, Kedar Yeole
Publisher Journal name: IJCRT
Volume: 6
Issue: 2
Pages: 251-257
Year: April-2018
Downloads: 1183
Driver seat in the automobile is an important system. There are so many parts in the driver seat which made it a complicated system.adjustments as well as safety systems. A seat adjustment includes height adjustment, fore and aft adjustment, back recline adjustments. Safety systems include seat belts, air bags and advanced head restraints. Generally professional driver works more than eight hours per day of a week, therefore driver seat must be designed by considering all the parameters. Also uneven road condition induces the vibration in a vehicle transmitted to driver body. Poorly designed driver seat affects the driver health and psychological conditions of mind. Three main objectives of any driver seats are safety, health and comfort of driver. This paper presents all the parameters of driver seat such as anthropometry of human, ergonomics related parameters, seat materials, safety related parameters, comfort related parameters as well as weight and aesthetics with classifications and basics of driver seat.
Licence: creative commons attribution 4.0
Driver Seat, Comfort, Safety, Health, Adjustments.
Paper Title: USE OF REMOTE SENSING AND GEOGRAPHICAL INFORMATION SYSTEM FOR ESTIMATION OF RUNOFF AND ANALYSIS OF GEOMORPHOLOGICAL PROPERTIES
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT1813654
Register Paper ID - 186181
Title: USE OF REMOTE SENSING AND GEOGRAPHICAL INFORMATION SYSTEM FOR ESTIMATION OF RUNOFF AND ANALYSIS OF GEOMORPHOLOGICAL PROPERTIES
Author Name(s): Mr. Vanve Devidas B., Dr.S.K.Ukarande
Publisher Journal name: IJCRT
Volume: 6
Issue: 2
Pages: 246-250
Year: April-2018
Downloads: 1137
An accurate understanding of the hydrological behaviour of a watershed is important for effective management. Runoff is the most basic and important data needed when planning water control strategies/ practices, such as, waterways, storage facilities or erosion control structures. The most popular method used for runoff estimation is NRCS-CN method. The Runoff curve number is a key factor in determining Runoff in the NRCS based hydrological modelling method. Now a days GIS and RS is being used with NRCS-CN method highly, most of the researchers found that use of NRCS-CN with help of GIS very accurate results in determination of Runoff. Kinhi watershed cover an area of near 1485 ha. And is consist of two revenue villages Kinhi and Bhairobawadi. The study was carried out in the hot and dry climatic
Licence: creative commons attribution 4.0
Paper Title: AUTOMATIC CLUTCHING AND BREAKING SYSTEM
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT1813653
Register Paper ID - 186180
Title: AUTOMATIC CLUTCHING AND BREAKING SYSTEM
Author Name(s): Mr.Yogesh Shivarkar, Mr. Vipul Talele, NishantLambe, Parikshit Shelar, Gunjan Kadam
Publisher Journal name: IJCRT
Volume: 6
Issue: 2
Pages: 243-245
Year: April-2018
Downloads: 1110
Licence: creative commons attribution 4.0
Clutch, IR, Braking, Automatic, Intelligent
Paper Title: OPTIMIZATION OF ZLD IN DISTILLERY INDUSTRY BY REVERSE OSMOSIS PROCESS FOR PREDICTION OF MULTI RESPONSES BY TAGUCHI ORTHOGONAL ARRAY
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT1813652
Register Paper ID - 186178
Title: OPTIMIZATION OF ZLD IN DISTILLERY INDUSTRY BY REVERSE OSMOSIS PROCESS FOR PREDICTION OF MULTI RESPONSES BY TAGUCHI ORTHOGONAL ARRAY
Author Name(s): Mr.Yogesh Shivarkar, Mr. Dhiraj Hande, Mr. Vishal dekate, Mr. Prashant Mahakalkar, Roshan Paliwal
Publisher Journal name: IJCRT
Volume: 6
Issue: 2
Pages: 238-242
Year: April-2018
Downloads: 1115
Licence: creative commons attribution 4.0
ANOVA, reverse osmosis parameters, design of experiment, multi response, orthogonal array, Taguchi method.
Paper Title: IOT BASED GARBAGE MONITORING SYSTEM FOR SMART CITY
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT1813651
Register Paper ID - 186177
Title: IOT BASED GARBAGE MONITORING SYSTEM FOR SMART CITY
Author Name(s): Mr. S. M. Hundiwale, Mr. Abhishek Shelke, Mr. Amardeep Tiwari, Mr. Sushant Nyaynit
Publisher Journal name: IJCRT
Volume: 6
Issue: 2
Pages: 234-237
Year: April-2018
Downloads: 1194
We are living in an age where tasks and systems are fusing together with the power of IOT to have a more efficient system of working and to execute jobs quickly! With all the power at our finger tips this is what we have come up with. In this paper, garbage monitoring system is implemented with IoT. This system monitors all the dustbins located throughout the city and compare it with the garbage bins depth. The ultrasonic sensors are used for detection of the dustbins status. When the level of the dustbin reaches the threshold limit, the device will transmit the level along with the unique ID provided to that dustbin. These details can be accessed by the concern authorities from their place with the help of internet and an immediate action can be made to clean the dustbins. This is our solution, a method in which waste management is automated. This project IoT Garbage Monitoring system is a very innovative system which will help to keep the cities clean. This system monitors the garbage bins and informs about the level of garbage collected in the garbage bins via a web page. This web page also send all information to garbage collection vehicles.
Licence: creative commons attribution 4.0
WI-FI MODEM, NODEMCU/ESP8266-12E WIFI MODULE, GPS, ULTRASONIC SENSOR, THINGER.IO IOT PLATFORM
Paper Title: MINING APPROXIMATE CIRCULAR PATTERN
Publisher Journal Name: IJCRT
Published Paper ID: - IJCRT1813650
Register Paper ID - 186176
Title: MINING APPROXIMATE CIRCULAR PATTERN
Author Name(s): MS. DEVYANI SHARMA, , PROF. DR. S. M. KAMALAPUR
Publisher Journal name: IJCRT
Volume: 6
Issue: 2
Pages: 230-233
Year: April-2018
Downloads: 1122
Pattern matching is the process of finding occurrences of a pattern string in a text or character string. Pattern matching is the basic requirement in many applications such as spell checking, spam filtering, geometry, network traffic data, DNA and protein sequences, etc. Circular Pattern occurs in the DNA of bacteria, viruses, archaea, etc. A linear string having length n can be considered as a circular string, in which end symbols are connected thus forming a circular string. The circular string is considered as n different linear strings, all will be considered equal. Nowadays biologists are interested in finding the approximate patterns. Approximate pattern matching is the technique of finding pattern string that match a pattern approximately rather than exactly. In practical experiments errors may occur due to natural mutations in the DNA of virus, practical limitations of the lab equipments that may introduce errors, etc. Due to these reasons we need to find the approximate circular patterns. The proposed system aims to find the presence of approximate circular pattern with k number of mismatches from the input stream. If the approximate circular pattern exists the system returns the pattern. Also the proposed system finds the presence of any pattern in the input stream.
Licence: creative commons attribution 4.0
Circular DNA sequences, Circular Pattern Matching, data stream processing, Pattern Recognition.
The International Journal of Creative Research Thoughts (IJCRT) aims to explore advances in research pertaining to applied, theoretical and experimental Technological studies. The goal is to promote scientific information interchange between researchers, developers, engineers, students, and practitioners working in and around the world.
Indexing In Google Scholar, ResearcherID Thomson Reuters, Mendeley : reference manager, Academia.edu, arXiv.org, Research Gate, CiteSeerX, DocStoc, ISSUU, Scribd, and many more International Journal of Creative Research Thoughts (IJCRT) ISSN: 2320-2882 | Impact Factor: 7.97 | 7.97 impact factor and ISSN Approved. Provide DOI and Hard copy of Certificate. Low Open Access Processing Charges. 1500 INR for Indian author & 55$ for foreign International author. Call For Paper (Volume 12 | Issue 7 | Month- July 2024)