Volume 6 | Issue 2

 Abstract

Any building structure used by the industry to store raw materials or for manufacturing the products like machine/s is known as an industrial building. Industrial buildings may be categorized as Normal type industrial buildings and Special type industrial buildings. Normal types of industrial buildings are shed type buildings with simple roof structures on open frames. These buildings are used for workshop, warehouses etc. These building require large and clear areas un-obstructed by the columns. The large floor area provides sufficient flexibility and facilitates the later changes in the production layout without major building alterations. The industrial buildings are constructed with adequate headroom for the use of an overhead traveling crane. Special types of industrial buildings are steel mill buildings used for manufacture of heavy machines, production of power etc. The function of the industrial building dictates the degree of sophistication.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Truss, Hollow Pipe, Tubular Pipe, GI Sheet

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Software Project Management, Software Cost Estimation, Algorithmic Models, Non-Algorithmic Methodologies

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

This paper mainly speaks about dispatching of microwaves through the X -band magnetron whose operating frequency lies in the range of 7.0-13.0GHZ with its input power of 6KV and can produce output power of 25KV which is then connected via coaxial cable to the circulator with proper impedance matching between the microwave source and transmit antenna of multiple input multiple output planar array with REV technique (retro directive) embedded into it to produce a microwave beam with VSWR (1.2). B.W.MAX of 25% and minimized phase error of 0.01% to enhance maximum transmission efficiency and lower the phase error at the RECTENNA after the pre processing of the received beam completed by amplitude mono pulse receiver method which can power the locomotive engine possessing universal motor of 1500 volt DC by down conversion of 25 KV - 1500V DC. There by the old conventional method of high tension power cable and pantograph collectors can be eliminated saving power losses and havocs to human life. This paper provides all the technical details of WPT(wireless power transmission technique by phased array to empower the future locomotives electrical run vehicles smart phones To overcome the power theft ,electrocution ,mechanical laying of overhead lines for locomotives and its maintenance

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Rev, amplitude mono pulse, phased arrays , Rectenna

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Opinion mining, explicit feature, ABOOT, ESA, implicit feature

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Cloud computing has been imagined as the cutting edge innovation of IT enterprises. The Cloud is where information proprietor remotely stores their information in the cloud to appreciate the brilliant applications and administrations. The primary objective of distributed computing idea is to anchor and secure the information which goes under the property of clients. In the corporate world there are an immense number of customers which is getting to the information and changing the information. In the cloud, application and administrations move to bring together enormous server farm and administrations and administration of this information may not be reliable in the cloud condition. So we utilize Third Party Auditor (TPA) who deal with the information as well as tells the customer that how much specialist organization is solid and can guard the information. Indeed, even at some point customer send false information or information is tainted because of clamour or some mistake, he guarantees that specialist organization changed his information. In this paper, we display an approach to executing TPA who check the unwavering quality of Service Provider as well as check the consistency and responsibility of information. This paper tends to this testing open issue of respectability and information progression. The motivation behind this paper is to bring more noteworthy clearness scene about cloud information security and their answer at client level utilizing encryption calculations which guarantee the information proprietor and customer that their information is unblemished.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

cloud computing, Third Party Auditor

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

A Study on the Importance of Innovation in Healthcare Sector in India

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

--- Advertising should be used only when it promises to bring good result more economically and efficiently as compared to other means of selling. There are goods for which much time and efforts are required in creating a demand by sending salesman to prospective buyers than by simply advertising them. Advertising in an organized series of advertising messages. It has been defined as “a planned, co-ordinate series of promotional efforts built around a central theme and designed to reach specified goals.” Internet marketing, also known as digital marketing, web marketing, online marketing, search marketing or e-marketing, is the marketing (generally promotion) of products or services over the Internet. Internet marketing is considered to be broad in scope because it only refers to marketing on the Internet, but also includes marketing done via e-mail and wireless media. Digital customer data and electronic customer relationship management (ECRM) systems are often grouped.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Advertisement, User Perception, E-marketing, Effectiveness, Ranny

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

This study was conducted in Chittoor and Nellore districts of Andhra Pradesh to study the profiles of rural young agricultural entrepreneurs. Total 140 respondents were randomly selected for the study and interviewed. Most of the respondents were late young aged 40%), had college and above level education (63.57%), had not undergone any training (72.86%), within training undergone majority (69.29%) of them had only knowledge based training, low entrepreneurial experience (42.86%), manufacturing entrepreneurial activity (52.14%), micro scale of operation (65%), sole proprietorship ownership status (55%), low extension contact (39.29%), nonofficial position (42.14%) and official position (37.86%) in one or more organizations, medium information seeking behaviour (47.14%), high economic motivation (44.29%), low family support (43.57%), medium financial support (35.71%), seasonal raw material supply (67.86%), whole sale market for their product (83.57%) and outside the village market (80.71%).

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Rural youth, Agricultural Entrepreneurs, Experience, Mode of operations

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

environment, temperature, perceived satisfaction, correlate, Design, Built environment

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Multilevel Inverter

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Abstract : Densities, viscosities and ultrasonic velocities of binary liquid mixtures of Methylbenzoate with 1-pentanol and 1-hexanol have been measured at 303.15 K. The experimental data have been used to calculate the various acoustical parameters namely adiabatic compressibility (?), free length (Lf), Internal pressure (?i), acoustical impedance (Z) and the excess values of the above parameters have also been evaluated. The variation of these parameters with composition of the mixture helps us in understanding the nature and extent of interaction between unlike molecules in the mixtures.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Ultrasonic velocity, Adiabatic compressibility, Binary system, Excess parameters.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

TITLE: A Case Study On The Effect Of Stair Climbing As A Fitness Tool INVESTIGATORS: T. JAMES PANICKER, MPT 2nd year, Saveetha College of Physiotherapy Dr. M. Manoj Abraham MPT(Ortho), PhD, Principal, Saveetha College of Physiotherapy. AIM: To determine the effect of stair climbing on cardio-vascular and Muscular fitness level. OBJECTIVE: To compare the cardio-vascular fitness level before and after using the staircase. To compare the lower limb muscular endurance before and after using the staircase. MATERIALS: Stop watch, Distance Cones, wooden block or a stool (to set the squat height.) METHODOLOGY: A case with a complaint of reduced cardio-vascular and Muscular endurance was selected and the pre-test for the subject was done by using 2.4km run test for to check cardio-vascular endurance and Squat Test for muscular endurance. After 6 weeks of interventions post-test was done by using the same 2.4km run test and Squat Test, to measure their Cardio-Vascular And Muscular Endurance respectively. OUTCOME MEASURES VO2 Max by 2.4 km run test. Squat test for Muscular Endurance. RESULT: This case study showed a significant result lower limb muscular endurance and cardio vascular fitness level in the post- test when compared with the pre-test values. Especially the Squat test results showed more significant result. CONCLUSION: The present study suggests that even a small bouts of regular Stair-Climbing is a more effective way to improve the Cardio-Vascular Fitness and especially Lower Limb Muscular Endurance and Stair Case is a handy Fitness Tool that can be utilized anywhere.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Fitness Tool, Stair Climbing, 2.4km Run test, Squat Test, Cardio-Vascular Endurance, Muscular Endurance, VO2 Max, Physical Fitness, Strengthening, Training.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Customer Relationship Management refers to the building a long-term and sustainable relationship with the customers so as to bring value to the company in the long-run. The company by adopting the CRM software can go for personalization of business, web interaction, quick access with large number of customers, better integration, and multi-channel customer contact to build the long term relationship and profitability. CRM strategic approaches can be described as the staff involvement in every step of CRM application. Top management commitment is also required to fulfill all the technological requirements and waiting till the result. It also includes the customer data management system to manage the huge customer base and retention. Many insurers have got the results by incorporating CRM to manage and retain the customers and to get a cost effective process. Indian insurers are also trying to adopt it. CRM can also be evaluated in terms of customer satisfaction, value, customer knowledge regarding products and innovation. CRM can bring the revolution to the insurance market in India by properly educating and grooming the customers as well as the officials and can dictate the paths for future.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Customer, customer relationship management, insurance, service quality, retention, loyalty, profitability.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Dushivisha, Kustha

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

The evolution theory was founded on the spontaneous generation of life proposed by Aristotle. His observation was proved wrong and hence it became a debunked theory. Therefore this paper opines that evolution theory does not have a strong base.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Creation, Evolution, hypothesis, theory Creator

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Theory can be a very practical tool. It enables us to make sense of the world. In fact, it is hardly possible to think systematically and scientifically about international relations and the regionalism without theory. When we understand and build theories of regionalism, we will automatically be able to understand more about the phenomenon of regionalism itself. In fact, to most researchers (at least the theorists), these are two sides of the same coin. One main purpose in proposing and assembling this collection is to reveal the pluralism and richness of theories of regionalism. Regionalism has a long history. From the seventeenth century to world war second, there were many RTA proposal involving colonies, provinces, and states and some of the agreements resulted in political as well as commercial unions. Example of early integration efforts include a 1665 proposal for commercial union among Austria, Bavaria, Spain, and some German principalities; an 1826 customs union between England and Ireland; an 1833 customs treaty establishing a single German Zollverein among splinter states and an 1854 Canada-US. In South included a 1910nSouth Africa Customs Union among the Union of South Africa, Bechuanaland, Basutoland, and Swaziland, and a 1917 customs union between the British colonies of Kenya and Uganda, which was extended to include Tanganyika in 1927. Despite these early agreements regional integration in its modern form did not develop until after World War second with the creation of the European Economic Community.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Theories of Regionalism, Forms of Regionalism, Theoretical Debates of Regionalism and Challenges of Regionalism.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

IoT,Object detection,Raspberry, Security,Surveillance .

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

In our system we are introducing three modules dynamic feedback system,Report generation and No dues.Feedback system is the web based application that provides the platform for the college to get feedback dynamically by using their individual logins for staff,HOD and Students.Report generation is the second module that helps the respective departments to keep their individual progress status of their students semester wise by representing it graphically through different Charts and also used the OCR driver to extract the characters from the image files and insert it directly to departmental database.It reduces the human efforts effectively.The last module is NO dues and its a very unique feature of our system that allows the students to apply their request and queries regarding their academic no dues process online from their remote locations.Th staff can also give their approvals to the students who had applied for the No dues.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

OCR,Dynamic Feedback,Report analysis,individual logins,NO dues

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Fire and explosion are unplanned events in the workplaces, especially where the handling, transportation, and storage of hazardous material took place. The existence of this results in huge losses in terms of human life, machinery and environment. In this work provides guidance for assessors of Fire and Explosion Risk Assessment by using source and dispersion model in oil and gas industry. Fire and Explosion have been identified as major potential hazards for Oil and Gas Production Storage area and pose risk to personnel, assets and the environment. Current fire and explosion assessment tools like source and dispersion models and others engineering practice. This tool features built-in calculations for fire and explosion impact assessment for jet and pool fire size estimation for gas/liquid release in a spherical and cylindrical storage area. Fire and Explosion impact assessment is an important part to calculate risks present in any storage area of oil and gas industry. Impact assessment analysis provides decisions support to safety based operations. In this work, I first review fire and explosion safety-related regulations and assessment framework for evaluating safety against fire and explosion hazard in tank shell area of oil and gas industry. It also covers the two topics, emphasizing definition and calculation method for estimating and consequences of fire and explosions. The purpose of dispersion and source models solve conservation of mass, momentum and energy equation, and can use to model the dispersion of clouds in presence of obstacles even of complex geometry. Moreover, they can deal with heavy, natural or light gas dispersion.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Dispersion Model, Impact assessment, Fire and Explosion, Engineering practice, Jet & pool fire

  License

Creative Commons Attribution 4.0 and The Open Definition