Volume 6 | Issue 2 | April-May-June-2018

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Contractor, CMMS Software, Materials, Management

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

The study is aimed at assessing the water quality index for drinking purposes of ground water of Bulandshahr city, U.P. Ground water quality has been determined by collecting 15 samples from different parts of Bulandshahr city. For calculating parameters such as pH, alkalinity, Total Hardness, TDS, Conductivity, Chloride, were considered No sample was found as excellent for drinking, although 1 sample out of all was found to be of good quality for drinking. More samples were declared poor for drinking purposes and 31.81 % samples were very poor for drinking purposes. This unsuitability of water quality of these samples is attributed to two factors i.e. large amount of waste water being discharged freely and over extraction of ground water by these industries. After analyzing the correlation between the parameters it was found that TDS showed a very strong relationship with conductivity and turbidity. The analysis revealed that the water of Bulandshahr is not good for drinking, thus it needed a pre-treatment before consumption and over extraction of ground water must be checked so as to curb the quality of ground water.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Water Quality, Chloride, TDS, , Alkalinity

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Keywords: Low Pass Filter, IE3D simulator, Vector Network Analyzer, Micro strip Filter

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Solid wastes constitute a mounting problem and have increased expanded mindfulness over late years. The measure of strong waste created on the planet is relentlessly expanding and no one cares about this problem. This paper present the study the solid waste generated in the delhi city and what are the major causes to generated by the help of government organizations. To trace the problem related to municipal solid waste management with some suggestion for better management. Delhi is the capital and having so much population in this area. All the data collected by the help of organizations such as CPCB, NEERI and different MCD Zones. this examination is prescribed that reasonable objectives and time spans should be built up, obligations and duties of national and nearby governments and industry illuminated and financing needs to be dispensed keeping in mind the end goal to create a viable waste administration structure in creating.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Keywords: Solid waste management, CPCB, Delhi

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

This study has been done as part of project for developing a comparison system of building materials, which could assist housing association in selecting the best available product for the best accessible item to reduce the natural effect of building. Buildings are the single biggest energy consumer in the Greater Noida and the NCR Region. In this case study, Study on the eco-friendly material used in Greater Noida construction site, analyse the quantity and the quality of the materials and quantify the cost of the eco friendly building material on the site. For this study, select the fly ash brick plant and autoclave aerated concrete (AAC) blocks plant in the Greater Noida city. Study the ingredients, quantity of materials, percentages of materials, setup of the plant and cost of the materials to make the fly ash brick and AAC blocks. This study concludes AAC block has large size and light weight as comparison to fly ash bricks. The compressive strength of the fly ash brick is more as comparison to the AAC blocks. The setup cost of the AAC block plants is more as comparison to the fly ash brick plant and also requirement of skilled labour for the AAC blocks. AAC blocks and fly ash brick uses pozzolanic materials which gives better strength, durable, environment friendly and resistance to chemical attack.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Keywords: Autoclaved Aerated Block (AAC), Fly ash, Strength, Cost

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

In Design of concrete structures, light weight concrete plays a prominent role in reducing the density and to increase the thermal insulation. In this experimental study, studied on the durability properties of lightweight concrete M-40 using crushed AAC blocks a lightweight aggregate as partial replacement of coarse aggregate has been carried out, by focusing on its ability to reduce dead load without significant reduction in compressive strength. For this study four concrete mixes marked as M-1, M-2, M-3 and M-4 were prepared with different replacement ratios (0, 10, 15 and 20 percent) of crushed AAC blocks with coarse aggregate and check the compressive strength after 7, 28 and 56 days of curing period. The test results shows that, AAC blocks replace by 10%, and 15% ,the compressive strength initially increases by is 4.34%, 12.12% and 11.28% and 1.1%, 2.13% and 0.77% respectively at 7days, 28 days and 56 days of curing period. At 20% replacement of crushed AAC blocks, compressive strength is going to decrease by 3.43%, 4.42% and 1.3% respectively at 7days, 28 days and 56 days of curing period. However, the strength of M-40 is achieved at 15% of optimum replacement of normal weight aggregate by crushed AAC blocks. Also the unit weight of cube specimens decreases by 5.16% with 15% replacement of normal weight aggregate with lightweight aggregate.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Autoclaved Aerated Block (AAC), Light Weight Concrete, Durability

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Goods transportation is very important for the development of any nation. Generally Freight Transportation on roads is carried by Trucks. The aim of this thesis is to developed goods truck trip generation model for Vatva GIDC. The company survey is carried out by individual for data collection purpose. The model has been developed using multiple linear regression analysis and. This establishes relationship between the daily numbers of trucks and factors like total floor area, total production area, totals no lcv/hcv etc.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Good transport, Truck trip, Goods truck trip generation.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

postmodernist erasure of boundaries has made humanities across cultures a seamless corpus of knowledge interface Euro-centricism, hitherto locking the abilities to engage with the other has been relocated in the epiphany moment of facing the other oriental epistemic discourse too reflected the same a priori delimitation of knowledge, for instance, Radhakrishnan Commission 1948 proposing a distinction between fact/nature event/society and values/spirit as subject matter of natural science, social science and humanities respectively. The time now has come to foreground, as Bakhtin would have it, the necessity of comparative dialogic to establish cross-cultural dialogic to eliminate homogenization of discourses and to deconstruct epistemic dominance of occidental knowledge. Similarly the Orientalist paradigm should change into more specifically, South-South dialogue of humanities and reconfiguration of the Asian problematic of singularities in humanities. The need for a shift a rethinking, to create what Derrida calls Transformed Humanities, New Humanities is absolutely imperative to reach a comprehensive understanding of mankind in general.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Humanities, Culture, Tradition, mythology, Folk elements

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

TRC (Textile reinforced concrete) is like a whiz in the Civil Construction Market. From many years research and developments are going on for introducing fibres into the various applications to get the best results. People have started using textile fibres successfully in many of the application like fibre reinforced concrete, fibre reinforced plastic, medical textile, geo textile etc. In fibre reinforced concrete, the conventional concrete nature is to shrink as soon as it dries and the product changes its volume and starts generating minor cracks. Since, the water content inside the product had evaporated leaving the pores inside it into a minor crack. So, with the use of textile fibres it will be possible to some extent to reduce crack by evenly distributing fibres in the concrete mixture. The addition of fibres upto some extend will increase the tensile and compressive strength. However, different fibres provide different properties based on their nature. In this paper, we will study how different fibres like Polypropylene, Steel, Nylon, Acrylic, Carbon and Glass along with their properties and will compare them to understand that which fibre suits best for particular application. Also we will discuss about the best performer fibre that can be used for any particular end use application.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

-

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Low power and high speed digital circuits are basic needs for any of digital circuit; De-multiplexer is a basic circuit for any digital circuit. In this paper de-multiplexer has been designed using CMOS, transmission gate pseudo nmos logic. The performance of designs has been compared in terms of power consumption, delay and transistor counts. The proposed design demonstrates the superiority in terms of power dissipation, delay and transistor counts, compared with existing 1:4 de-multiplexer and comparative analysis on 90nm and 45nm technology. The schematic of developed de-multiplexer has been designed and simulated using Tanner EDA tool.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

De-multiplexer, CMOS, Transmission gate, pseudo NMOS gate, Power dissipation, delay.

  License

Creative Commons Attribution 4.0 and The Open Definition