Volume 9 | Issue 6 |

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Index Terms: Controlled release, Drug delivery, Microsponge, Topical formulation.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Construction is the major part of everyday life. It requires all the construction material which mainly includes cement and sand. Cement provides the basic strength to the building. The manufacturing of cement is a major issue as it involves pollution on a large level as well as cost of construction also increases. This cement can be replaced by a construction material called fly ash. Sand provides bulk, strength and other properties to the building. Sand is a granular material composed of finely divided rock and mineral particles. It is defined by size, being finer than gravel and coarse than silt. Sand can also refer to a textural class of soil or soil type; i.e., a soil containing more than 85 percent sand-sized particles by mass.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Natural sand, Bakelite powder, Strength, Concrete cubes, Compressive strength

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Traditionally, naturally available river sand has been the choice and there are no issues with this practice. With ever increasing construction activities, this resource is dwindling globally. Restrictions put in place by various governmental agencies has brought in severe strains on the construction industry to look for alternate materials. M-sand and GGBS are two such alternatives that are used to replace natural sand in cement concrete.The purpose of this project is to investigate the feasibility of these materials as a replacement to natural sand by conducting experiments.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

M-sand, GGBS, Fine aggregate, Cement

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Educated unemployment is a serious issue in Assam. This paper made an attempt to address this issue

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Educated, unemployment, assam

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

The current work is an effort to summarise the numerous quality guarantees of herbal formulations as well as their parameters. The quality assurance parameters that must be strictly followed for the herbal formulations during and after the manufacturing process, for the finished products in order to ensure their effectiveness, stability, and protection during the product's shelf life, have been briefly accounted for. Following a review of the introduction and history of herbal formulation use, the distinction between quality assurance and quality control is presented, as well as the general definition of quality assurance of herbal formulations such as macroscopic and microscopic characterization.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Index Terms- Herbal drug, Quality, GMP

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

In last some years, it has been observed that, the high rise buildings are failed due to the various seismic and vertical failures in geometry. Hence we need more investigation on the structures with vertical irregularities under seismic. The effect of lateral load on structure with vertical irregularities should be examined to reduce failure of structure. This study summarizes the studies done on the seismic analysis of RCC building structure with different vertical irregularities. From the study, it has been concluded that the structure with vertical irregularity failed under seismic loading and need to find specific code or special design for such structures. The performance of a high rise building during a strong earthquake motions depends on the distribution of stiffness, strength and mass along both vertical and horizontal directions. If there is discontinuity in stiffness, strength and mass between the adjoining storeys of a building then such a building is called as irregular building. The present study focuses on vertical irregular G+11 reinforced structures (RC) building under seismic loading. Total four buildings are modeled and analyzed in software called as STRUCTURAL ANALYSIS AND DESIGN Pro (STAAD-PRO). Out of four buildings, one building is regular and 3 buildings are irregular. Different seismic responses like lateral story displacement, story shear force and story bending moment are obtained. By using these seismic response comparison has been made regular and irregular building. The results indicate a conclusion that, a building structures with stiffness irregularity provides instability during seismic loading. To overcome this instability or rather say that to control instability, an appropriate amount of stiffness is very vital in RC building.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Multistorey Building, R.C.C Structure, Seismic analysis, Vertical Irregularity

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Image is a key of digital data which is used in many studies and research work as dataset. These datasets are compromised due to distortion which is caused by the presence of noise. Occurrence of noise is found while capturing image, transmission of pictorial data over different networks, etc. An image can be corrupted due to various factors, among them Noise plays a vital role in image corruption and this noise can also exist individually with varying intensities of different noise factor or also as hybrid noise [i.e Combination of different noises], hence removal of noise becomes a main challenge in image processing. In general, the results of denoising affect the quality of the image processing approaches. The nature of the noise removal issue depends on the sort of the noise corrupting the image. The Salt and Pepper, Gaussian, Poisson and Speckle noise are the noises that usually affect the images. To restore these degraded images, many de-noising algorithm has been evolved and one among them are filtering techniques. In this research work, three filters are considered for denoising i.e. Weiner filter, Gaussian filter and Median filter. The current work is implemented on gray scale images and the evaluation of these algorithms is done by the measure of the PSNR and MSE values. In addition, we propose to use hybrid filter for denoising images that can be corrupted by individual or hybrid noise.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Image processing, Denoising, Hybrid, PSNR, MSE

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

User, Card, Business, Design, Developer

  License

Creative Commons Attribution 4.0 and The Open Definition