Volume 5 | Issue 3 |

 Abstract

The main of the project is to build Self configuration and Smart binding control system by using IOT and Zigbee technologies. In this project we design a system which builds a self configuration system that integrates IOT and Zigbee technology using a switch. That is we can control the lighting in two modes : IOT and ZigBee technology with the help of a switch. Zigbee Technology is used for a large range of fields, providing communications and sensing with low power consumption, high reliability, and multi-node networking. Whereas Bluetooth technology is used in short range applications. Thus this paper proposes a ‘Self-Configuration and smart Connection System’ that integrates the IOT and ZigBee technology, and confirms its feasibility in both theory and practice. Lighting control systems with sensors are constructed with Self-configuration and smart lighting control. The system configures lighting based on Received Signal Strength Indicator (RSSI) information of reference points, and provides information about lighting RSSI for controlling devices, facilitating reference alignment. The increasing prevalence of smart devices in recent years has supported new applications of the IOT .

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

ZigBee, IOT, Auto-configuration, Smart binding, WSN, RSSI.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

The main aim of the project is to provide security for woman and children. The purpose of the project is to provide security for women and children. In case of emergency situations woman or children will press an emergency button which will activates the GPS for location tracking and a SMS is sent to the police and family members of woman or child along with time.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

SMS, GPS, GSM.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

The test pattern for a multiple fault is the special test pattern for the special single stuck-at fault forming the multiple one. Test for all multiple faults is derived from any test for all single stuck-at faults. The length of the multiple faults test is linear function of the single faults test length. A multiple fault test is the one of high quality. In particular SEU and bridge faults may manifest themselves as multiple faults at the CLBs poles. Deriving test for all multiple faults was executed for the certain bench-marks. For them the length of the multiple faults test is about the twice length of the single faults test. The circuit is designed by covering the Shared ROBDD by CLBs. The entire project describes finding multiple faults in combinational logic blocks using ROBDD technique.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Multiple faults, ROBDD, combinational logic

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

ABSTRACT The pot experiment was carried out during September 2015 to January 2016 at instructional farm, College of Agricultural Engineering, UAS Raichur under rain shelter to study the effect of different water regimes, (i.e. T1:100, T2:90, T3:80, T4:70, T5:60 and T6:50) per cent of water application with available moisture holding capacity on grain yield and crop coefficients for different treatments. Completely Randomized block design with four replications was used in this study. The results showed that there was significant difference between the yield and crop coefficients under different levels of irrigation. The total irrigation water applied were (i.e., 211.98, 243.02, 225.78, 155.09, 135.51 and 105.62 mm/plant) under different water regime treatments (100, 90, 80, 70, 60 and 50 %) of available moisture holding capacity (AMHC) respectively. Grain yield productions under different treatments were 106.25, 171.25, 127.50, 75, 55 and 40.75 g/plant/pot at 100, 90, 80, 70, 60 and 50 per cent of AMHC respectively. Therefore, the 90 % of AMHC treatment (T2) is recommended for groundnut irrigation for water saving. The comparison of actual crop coefficient that obtained by water balance technic in experiment and crop coefficient (Kc) values of groundnut for different crop growth stages were selected based on the values suggested by FAO (Allen et al., 1998) are similar in the treatment of 90 % (T2) of the AMHC. Furthermore, the result showed that the treatment of 90 per cent of Available moisture holding capacity (T2) seemed to be better adapted to product a high crop yield with acceptable yield coupling with water use efficiency in this region.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Keywords: Crop coefficient, AMHC, water use efficiency, crop yield, water regimes

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

DEVELOPMENT OF CREDIT RISK MANAGEMENT SYSTEM FOR NON-BANK CREDIT ORGANIZATIONS

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

RMIS; credit organizations; Bank; risk

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Hydrogen Bonded, Coordination Polymer, Bridged Complex

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Abstract The Indian insurance industry is more than 150 years old. This industry has witnessed many phases of the working from the days when there were many private sector companies initially and they moved to nationalization and again to the private sector. Being one of the segments of financial sector, it has in the recent past gone through a transformation and change including the passing of IRDA (Insurance Regulatory and Development Authority) Act 1999. Due to the IRDA act 1999 the insurance sector has been opened up, the monopoly of government companies has broken and many new private players have entered into the insurance sector and thus the sector has become highly competitive with full of challenges. This research paper focuses on compensation strategies of employees of general insurance companies. It helps to analyses present compensation policies on performance of employees in general insurance companies. The compensation packages which are include both monetary and non monetary items. This will help the organization to reduce the employee turnover. If the employee is satisfied with the job then it will leads to higher performance and productivity and reduces the labour turnover. Every organization wants to survive in the competition and for that purpose they try to satisfy the employees for a long time which will help the organization to achieve its objectives. This paper will focus on the relationship between employees pay packages and their performance with respect to general insurance companies.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Motivational strategies, Performance of employee, IRDA act 1999, Employee satisfaction, Competitive market.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

In ancient history of composite, it was first time used by Egyptians and Mesopotamian which were construct strong and durable buildings with mixture of straw and mud about 1500s B.C. Later Mongols invented first bow which was made by mixture of bone, wood and animal glue [1]. But according “Mar-bal” incorporation history was composite around 3400 BC which was used by ancient Mesopotamians in ancient time. They created plywood using the glue and wood strips at different angles. Egyptians prepared death masks with composite about to 2181-2055 BC. In about 1200 AD Mongols invented first composite bow. The bow was small and accurate and had extremely strength. In 1800’s there was great revolution in the chemistry in which polymerization produces synthetic resins. In early 1900’s different type of plastics such as polyester, vinyl and phenolic was developed. First glass reinforced polymer composite was prepared in thirties.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

FABRICATION AND MECHANICAL PROPERTIES OF SHORT SISAL FIBRE REINFORCED EPOXY COMPOSITE

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Sum square difference product prime labeling of a graph is the labeling of the vertices with {0,1,2---------,p-1} and the edges with absolute difference of the square of the sum of the labels of the incident vertices and product of the labels of the incident vertices. The greatest common incidence number of a vertex (gcin) of degree greater than one is defined as the greatest common divisor of the labels of the incident edges. If the gcin of each vertex of degree greater than one is one, then the graph admits sum square difference product prime labeling. Here we identify some planar graphs for sum square difference product prime labeling.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Prime labeling, greatest common incidence number, sum square, planar graphs.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

The paper is about to use and to implement the technology for visual impaired persons. Persons with visual impairment have the right to expect the same standard of services and equitable to access information and education as every other member of the society. Information Technology (IT) have opened a new door for disabled people. In India, more than 2.19 corer people are suffering from disability out of that 1.0 % are visual impaired. Technology can play an important role in lives of people with disability. New technology devices for disabled have raised the expectation that more people with disabilities can function more independently in their life for getting education and rehabilitation

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Visual Impaired, Accessibility, Rehabilitation

  License

Creative Commons Attribution 4.0 and The Open Definition