Published Paper Details:

The Nunudere River bridge is located at the Baguia post administrative, Baucau Municipality. In calculating the structure of this bridge, the dimensions used are railing 150/200 mm, sidewalk width 600 mm, traffic road width 6000 mm, bridge floor slab thickness 200 mm, the diaphragm 300/500 mm, girder 450/900 mm, and span length 13,200 mm. Furthermore, the materials used are concrete and reinforcing steel. The compressive capacity of concrete is 30 MPa and the tensile capacity of steel is 400 MPa. The maximum moment obtained at the support pillar was 2.86 KNm and the transverse force was 2.86 KN, on the sidewalk slab the moment was 15,124 KNm, on the floor slab the moment was 67.6192 KNm (M-support) and 60.20852 (M-field), on the main girder the moment was 1937.2 KNm and the transverse force was 599.3 KN, in the transverse girder (diaphragm) the moment is 55,864 KNm and in the transverse girder 153,455 kN. Thus, the dimensions of the concrete reinforcement for the main reinforcement pillars are 4?10 and stirrups ? 6 - 450 mm, the pavement slab with longitudinal reinforcement ?16 - 300 mm and transverse reinforcement ? 13 - 700 mm, the traffic floor slab with longitudinal reinforcement ? 13-200 mm and transverse reinforcement ? 16 - 150 mm, in the transverse beam (diaphragm) 4 main reinforcement ? 22 and 2 compression reinforcement rods 2 tensile reinforcement rods with stirrup reinforcement ? 10-200 mm. 13?32 main girders and 3 compression reinforcement bars, 10 tensile reinforcement bars. Apart from that, shrinkage reinforcement with 4 ? 12 - 200 mm and stirrup reinforcement ?12-120 mm and 200 mm is installed in the girder body.