Published Paper Details:

ABSTRACT:- The raw materials used in cement are limited and also non- renewable. So it is been need to be conserved for future generations. With this goal of attaining sustainable construction in concrete is emerging throughout the world. Fly ash from coal based power plants is one such waste which is abundantly available in the different parts of India. Red mud is the composed of a mixture of solid and metallic oxide-bearing impurities, and disposal problems the red mud caused by the oxidized iron. Red mud cannot be disposed of easily. To find the optimum replacement of cement by red mud & fly ash. To find the compressive strength, split tensile strength and flexural strength of red mud & fly ash used concrete. To identify various industrial wastes suitable for utilization in cement manufacture. For concrete to be durable, careful selection of the mix and materials is necessary, so that deleterious constituents do not exceed the limits. So it is very essential to conduct tests regarding cement, fine and coarse aggregate to know their strength, consistency and stability and durability. Good quality materials will increase the strength of the concrete.The mix proportions shall be selected to ensure the workability of the fresh concrete and when concrete is hardened, it shall have the required strength, durability and surface finish. The grade of the concrete used in this project is M35 and we adopted design mix concrete. The mix shall be designed to produce the grade of concrete having the required workability and a characteristic strength. IS 10262-2009 is used for calculating the quantity of materials and its proportion. Quality assurance should be made to ensure the quality of the materials used for mix of concrete. The project is not only concerned about the characteristic strength of concrete but also concerned with workability, consistency, stability and durability of concrete.