Published Paper Details:

In every wire/core cable, the specification of than wire is printed on the surface of the wire with regular interval. The issue of mistake free electrical wire construction is very paramount in any electrical equipment. Every code printed on the wire matters is important. Therefore we intend to aid a system that involves proper printing of codes on the wire. Wires are made by standard wire ropes of desired wire gauge in different diameter or no of wires depending upon its end use. The main aim of this project is meeting local and international standards for traceability such as batch number, part number, date, specification, details ,logos etc., This makes recalls of product possible and protects the consumers. Coding in wire helps to reassure the customer that the product is genuine. It helps to track the product, so in the event of problem with a product, the cause can be identified and required change can be made.The concept of project is if the printing gets interrupted at any cause, the motor running the printer gets stopped automatically with the help of pattern matching technique. By the digital image processing pattern matching technique, the details to be copied in the wire should already dumped into the predefined patterns. While printing, the pattern is checked for matching continuously using camera and sensors fixed to the machine. If the mismatch is detected then the motor is intimated to stop the machine. So this prevents the non-printed wire. It can be done at most speed and the printing can be done downwards, side on or from underneath / and in any orientation. It gives good printing tolerance even when the surfaces are not flat or still. It works relatively low capital costs and also ranges of inks are available.