Published Paper Details:

Nowadays vehicle thefts are increasing all over the world. Everyone is very concerned about securing their vehicles. This paper design and develop vehicle theft control systems used to prevent or control vehicle theft. The system is designed using the mobile phone supplied with the vehicle with a connector to connect the engine control module (ECM) via the control network (CAN) bus, which in turn is transmitted to the ECM. The secure communication mode between the smartphone and the vehicle is carried out via the GSM network. Using a smartphone, the owner can lock or unlock the vehicle and detect it in case of theft. By reading the signal received by the mobile phone, the engine ignition can be controlled and tell owner to immediately lock or turn off the engine. And again, it will return to normal only after entering a strong password. The operation of this circuit is mainly dependent on the MEM sensor. The actual position of the MEM sensor should be 90 degrees with respect to the ground. If there is a change in the actual position of the MEM, a control signal will be sent to the ADC. The ADC converts the analogue signal to digital signal and sends this digital signal to the microcontroller.