Published Paper Details:

The primary goal of this project is to use ETABS to analyse and design G + 6 buildings in a variety of seismic zones and soil types. All four zones and three types of soils have been taken into account in this project. ETABS (Extended Three Dimensional Analysis of Building System) is a software that includes all of the major analysis engines, including static, dynamic, linear, and non-linear, and is used to analyse and design buildings in particular. The goal of this research is to use Response spectrum analysis to investigate the behaviour of a G+6 building that has been subjected to an earthquake load. For all possible load combinations, we looked at a G + 6 storey building. [Dead, Live &Seismic loads]. Seismic loads were taken as per IS 1893: 2016. The analysis of a G + 6 building under various load combinations was our final project. As specified in the plan, we considered a commercial structure. From the ground to the sixth floor, the height is 3.5 m is the height of the floor. Self-weight, dead loads were applied to the structure under the load case details of load, live load, and seismic loads Seismic load calculations were performed using the following software: ETABS. 1893-2016 IS (part-1). The beam and column members' cross-sections were assigned, and the materials were specified. The structure's base supports were also specified as fixed.