Published Paper Details:

The Discrete Element Method was first introduced in 1979 to model granular soils within the context of geotechnical engineering. The material is modeled as a random assembly of discrete elements. Each particle interacts with neighboring particles through contact forces that can be built up and broken at any time. The particles were modeled as discs in 2-D or as spheres in 3-D. Research studies have been conducted to improve the simulation of actual grain shapes in (2003) developed the overlapping rigid clusters (ORC) method to accurately model irregular particle shapes. The idea relies on clumping a number of overlapping discs such that their coincides with that of the actual particle. In this dissertation, experimental verification program is presented. An experimental setup was built and model-grains were manufactured in the laboratory. A numerical simulation for the experimental test was carried out. The numerical and experimental results were compared qualitatively and quantitatively. A good agreement was observed within small displacements ranges. However, results were considerably different at large displacements. Numerical results utilizing the ORC method were closer to the experimental results than those of discs. A sequential and operator-independent procedure, which relies on the ORC concept, was developed. Identical inertial properties between the actual particle and the model were ensured. The new procedure was implemented for rounded and angular particles. The effect of particle shape and angularity on the strength and dilatancy characteristics of granular soils was investigated.