ISSN2320-2882
Impact Factor9.17
UGC ParametersAligned
Low Cost₹1501 / $59
CrossRefDOI
ESTD2013
Peer ReviewTransparent
AccessOpen
Submission: Always Open
Paper Title
Design And Analysis Of Leaf Spring In A Heavy Truck
Authors
Prof .Tanuja Hulavale , Dhanashree G Moharir , Hemlata Patil
Keywords
Leaf Spring; Composite Materials ; Creo; ANSYS
Abstract
A leaf spring is a simple form of spring, commonly used for the suspension in wheeled vehicles. Leaf Springs are long and narrow plates attached to the frame of a trailer that rest above or below the trailer's axle. There are monoleaf springs, or single-leaf springs, that consist of simply one plate of spring steel. These are usually thick in the middle and taper out toward the end, and they don't typically offer too much strength and suspension for towed vehicles. Drivers looking to tow heavier loads typically use multileaf springs, which consist of several leaf springs of varying length stacked on top of each other. The shorter the leaf spring, the closer to the bottom it will be, giving it the same semielliptical shape a single leaf spring gets from being thicker in the middle. Springs will fail from fatigue caused by the repeated flexing of the spring. The aim of the project is to design and model a leaf spring according to the loads applied. Presently used material for leaf spring are forged steel. In this project we are going to design leaf spring for the materials Mild Steel and composite material Glass Carbon by varying reinforcement angle. We are going to check the strength variations while changing reinforcement angle. For validating this design we are conducting FEA Structural Analysis is done on the leaf spring by using two different materials Mild Steel and Glass Carbon. Modal and fatiuge Analysis is also done. Pro/Engineer software is used for modeling and ANSYS is used for analysis.
Full Paper, Downloads & Preview
How To Cite
Choose the style your journal or department asks for, then copy it. Every version below is generated from this paper's own record.
IJCRT — journal style
"Design And Analysis Of Leaf Spring In A Heavy Truck", IJCRT - International Journal of Creative Research Thoughts (www.ijcrt.org), ISSN:2320-2882, Vol.14, Issue 3, page no.207-216, March 2026, Available :https://ijcrt.org/papers/IJCRTBN02029.pdf
APA — 7th edition
Hulavale, T., Moharir, D. G., & Patil, H. (2026). Design And Analysis Of Leaf Spring In A Heavy Truck. International Journal of Creative Research Thoughts, 14(3), 207-216. https://ijcrt.org/viewpaperforall.php?paper=IJCRTBN02029
MLA — 9th edition
Hulavale, .Tanuja, et al. "Design And Analysis Of Leaf Spring In A Heavy Truck." International Journal of Creative Research Thoughts, vol. 14, no. 3, 2026, pp. 207-216, https://ijcrt.org/viewpaperforall.php?paper=IJCRTBN02029.
Chicago — 17th, bibliography
Hulavale, .Tanuja, Dhanashree G Moharir, and Hemlata Patil. "Design And Analysis Of Leaf Spring In A Heavy Truck." International Journal of Creative Research Thoughts 14, no. 3 (2026): 207-216. https://ijcrt.org/viewpaperforall.php?paper=IJCRTBN02029.
Harvard — author–date
Hulavale, T., Moharir, D.G. and Patil, H. (2026) 'Design And Analysis Of Leaf Spring In A Heavy Truck', International Journal of Creative Research Thoughts, 14(3), pp. 207-216. Available at: https://ijcrt.org/viewpaperforall.php?paper=IJCRTBN02029
IEEE — numbered reference
T. Hulavale, D. G. Moharir and H. Patil, "Design And Analysis Of Leaf Spring In A Heavy Truck," IJCRT, vol. 14, no. 3, pp. 207-216, Mar. 2026.
Vancouver — biomedical
Hulavale T, Moharir DG, Patil H. Design And Analysis Of Leaf Spring In A Heavy Truck. IJCRT. 2026 Mar;14(3):207-216.
AMA — 11th edition
Hulavale T, Moharir DG, Patil H. Design And Analysis Of Leaf Spring In A Heavy Truck. IJCRT. 2026;14(3):207-216. Accessed at https://ijcrt.org/viewpaperforall.php?paper=IJCRTBN02029
BibTeX — Zotero, Mendeley, LaTeX
@article{IJCRTBN02029,
author = {.Tanuja Hulavale and Dhanashree G Moharir and Hemlata Patil},
title = {Design And Analysis Of Leaf Spring In A Heavy Truck},
journal = {International Journal of Creative Research Thoughts},
volume = {14},
number = {3},
pages = {207-216},
year = {2026},
month = {March},
issn = {2320-2882},
url = {https://ijcrt.org/viewpaperforall.php?paper=IJCRTBN02029}
}
RIS — EndNote, RefWorks
TY - JOUR
AU - Hulavale, .Tanuja
AU - Moharir, Dhanashree G
AU - Patil, Hemlata
TI - Design And Analysis Of Leaf Spring In A Heavy Truck
T2 - International Journal of Creative Research Thoughts
JA - IJCRT
VL - 14
IS - 3
PY - 2026
SN - 2320-2882
UR - https://ijcrt.org/viewpaperforall.php?paper=IJCRTBN02029
SP - 207
EP - 216
ER -
Issue
Volume 14 Issue 3,
March-2026
Pages : 207-216
Article Information
- Pages
- 207-216
- Published
- March 2026
- Registration ID
- IJCRT_303359
- Published Paper ID
- IJCRTBN02029
- Research Area
- Science and Technology
- Author Type
- Indian Author
- Location
- India
- Peer Review
- Request Peer Review Report
- Licence
- CC BY 4.0 · Open Access
- ISSN & Impact Factor
- 2320-2882 · IF 9.17
- Downloads
- 236
- Permanent Link
- https://ijcrt.org/viewpaperforall.php?paper=IJCRTBN02029
- Published Paper PDF
- https://ijcrt.org/papers/IJCRTBN02029.pdf
Summarise this Paper with AI
Opens your assistant with a prepared prompt. AI summaries can be incomplete or wrong — read the full paper before citing it.
Author Services
Certificates, printed copies and official reports for this paper
Published authors can request a hard copy of their certificate or of the printed journal, and obtain the transparent peer review and plagiarism reports for this article — each issued against this paper’s registration record.
Registration ID IJCRT_303359Printed copies
Hard Copy of CertificatePrinted certificate for each author, posted to you.
Hard Copy of JournalA bound printed copy of the issue this paper appears in.
Reports & recognition
Transparent Peer Review Report
The reviewer comments and decisions behind this article.
Turnitin Plagiarism Report
The similarity check run on this manuscript.
Best Paper Nomination
Put this article forward for the issue’s best paper award.
Requests are verified against the registration ID of this article.
About Publisher
International Journal of Creative Research Thoughts
Published by IJCRT Publication
2320-2882
ISSN
9.17
Impact Factor
2013
ESTD Year
Open
Access
Impact Factor 9.17, calculated from Google Scholar citation data — see how it is worked out.
An international scholarly open access journal: peer-reviewed, refereed, multidisciplinary, monthly and multilingual, with Crossref DOI registration, rich metadata and a citation generator. Verified indexing & discovery records.
IJCRT is a Transparent, Peer-Reviewed, Open Access Journal (Refereed Journal). Following the discontinuation of UGC and UGC-CARE journal listing, IJCRT is aligned with UGC’s Suggested Parameters for Choosing Peer-Reviewed Journals. UGC Public Notice
Licence
© 2026 — Authors hold the copyright of this article.
This work is licensed under a
Creative Commons Attribution 4.0 International License
and The Open Definition.
This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0),
which permits unrestricted use, distribution and reproduction in any medium, provided the original author and source are credited.
Disclaimer:
The content, data and findings in this article are based on the authors’ research and have been
peer-reviewed for academic purposes only. Readers are advised to verify all information before practical
or commercial use. The journal and its editorial board are not liable for any errors, losses or
consequences arising from its use.
Declarations
Funding
No external funding was received for this study.
Conflict of Interest
The authors declare that they have no conflict of interest.
Acknowledgements
The authors would like to thank the reviewers and the editorial board of International Journal of Creative Research Thoughts for their careful reading and constructive comments, and all colleagues who supported the preparation of this manuscript.
About the Journal
9.17Impact Factor
UGC AlignedSuggested Parameters
TransparentPeer Review
Open AccessNo Paywall
CrossrefDOI Available
Monthly12 Issues / Year
Since 2013Established
2320-2882ISSN
How Publication Works
1Submit Your PaperOnline or by email. A registration ID is issued straight away.
2Transparent Peer ReviewDouble-blind review by subject experts, reported openly.
3AcceptanceThe result reaches you by email and SMS against your registration ID.
4Published Open AccessFree to read worldwide, with certificate and letter ready to download.
Article Impact
45Views
31Downloads
76Total reads
Mar 2026Published
Published · 210 days ago
Today · last read yesterday
1.8 views and 1.2 downloads per day over 25 days counted.
Counts exclude identified crawler traffic and repeat hits from the same reader within 30 minutes. Downloads reached directly through a search engine or an existing citation link are not included, so the figure is a conservative count of activity through this site. Full statistics
Discovery & Indexing
Find this paper on search engines and scholarly indexes, and check the journal’s verified records.
Find this paperSearch
Google ScholarExact-title search, with citing articles once indexed.Search
CrossrefMetadata search across all Crossref records.Search
Semantic ScholarAI-powered literature search.Search- BASEBASEBielefeld Academic Search Engine — open-access harvester.Search
ResearchGateResearch network publication search.Search
Journal recordsVerified
“Search” opens a live search for this paper; “Verified” opens a journal record checked on the Indexing & Discovery page. Third-party services index at their own discretion, often several weeks after publication.
