ISSN2320-2882
Impact Factor9.17
UGC ParametersAligned
Low Cost₹1501 / $59
CrossRefDOI
ESTD2013
Peer ReviewTransparent
AccessOpen
Submission: Always Open
Paper Title
DESIGN AND THERMAL ANALYSIS ON ENGINE CYLINDER FIN BY MODIFYING ITS MATERIAL AND GEOMETRY
Authors
K.Sivaramakrishnan , G.Ramakrishna , S.Selvaprakash , A.Sunil Kumar Giri
Keywords
engine fin, steady state thermal analysis, design
Abstract
The major component which is subjected to high amount of thermal variations is the engine cylinder fin. The cooling of the engine cylinder is increased by increasing the surface area of the engine fin. The main aim of this paper is to investigate the thermal dissipation of the heat from the engine fin for higher rate of cooling. This can be analyzed by changing the geometry and applying different materials for it. The geometry used for this analysis is circular, rectangular, helical, tapered, longitudinal, angular. The materials used for this analysis are Grey Cast iron and Aluminium Alloy 6061. The design is created in Creo 3.0 and the thermal analysis is done in Ansys Workbench 16.1. Based on our analysis Aluminium Alloy 6061 shows maximum thermal dissipation and higher rate of cooling, specifically circular fin has maximum value
Full Paper, Downloads & Preview
How To Cite
Choose the style your journal or department asks for, then copy it. Every version below is generated from this paper's own record.
IJCRT — journal style
"DESIGN AND THERMAL ANALYSIS ON ENGINE CYLINDER FIN BY MODIFYING ITS MATERIAL AND GEOMETRY", IJCRT - International Journal of Creative Research Thoughts (www.ijcrt.org), ISSN:2320-2882, Vol.6, Issue 1, page no.903-909, January 2018, Available :https://ijcrt.org/papers/IJCRT1801416.pdf
APA — 7th edition
K.Sivaramakrishnan, G.Ramakrishna, S.Selvaprakash, & Giri, A. S. K. (2018). DESIGN AND THERMAL ANALYSIS ON ENGINE CYLINDER FIN BY MODIFYING ITS MATERIAL AND GEOMETRY. International Journal of Creative Research Thoughts, 6(1), 903-909. https://ijcrt.org/viewpaperforall.php?paper=IJCRT1801416
MLA — 9th edition
K.Sivaramakrishnan, et al. "DESIGN AND THERMAL ANALYSIS ON ENGINE CYLINDER FIN BY MODIFYING ITS MATERIAL AND GEOMETRY." International Journal of Creative Research Thoughts, vol. 6, no. 1, 2018, pp. 903-909, https://ijcrt.org/viewpaperforall.php?paper=IJCRT1801416.
Chicago — 17th, bibliography
K.Sivaramakrishnan, et al. "DESIGN AND THERMAL ANALYSIS ON ENGINE CYLINDER FIN BY MODIFYING ITS MATERIAL AND GEOMETRY." International Journal of Creative Research Thoughts 6, no. 1 (2018): 903-909. https://ijcrt.org/viewpaperforall.php?paper=IJCRT1801416.
Harvard — author–date
K.Sivaramakrishnan et al. (2018) 'DESIGN AND THERMAL ANALYSIS ON ENGINE CYLINDER FIN BY MODIFYING ITS MATERIAL AND GEOMETRY', International Journal of Creative Research Thoughts, 6(1), pp. 903-909. Available at: https://ijcrt.org/viewpaperforall.php?paper=IJCRT1801416
IEEE — numbered reference
K.Sivaramakrishnan, G.Ramakrishna, S.Selvaprakash and A. S. K. Giri, "DESIGN AND THERMAL ANALYSIS ON ENGINE CYLINDER FIN BY MODIFYING ITS MATERIAL AND GEOMETRY," IJCRT, vol. 6, no. 1, pp. 903-909, Feb. 2018.
Vancouver — biomedical
K.Sivaramakrishnan, G.Ramakrishna, S.Selvaprakash, Giri ASK. DESIGN AND THERMAL ANALYSIS ON ENGINE CYLINDER FIN BY MODIFYING ITS MATERIAL AND GEOMETRY. IJCRT. 2018 Feb;6(1):903-909.
AMA — 11th edition
K.Sivaramakrishnan, G.Ramakrishna, S.Selvaprakash, Giri ASK. DESIGN AND THERMAL ANALYSIS ON ENGINE CYLINDER FIN BY MODIFYING ITS MATERIAL AND GEOMETRY. IJCRT. 2018;6(1):903-909. Accessed at https://ijcrt.org/viewpaperforall.php?paper=IJCRT1801416
BibTeX — Zotero, Mendeley, LaTeX
@article{IJCRT1801416,
author = {K.Sivaramakrishnan and G.Ramakrishna and S.Selvaprakash and A.Sunil Kumar Giri},
title = {DESIGN AND THERMAL ANALYSIS ON ENGINE CYLINDER FIN BY MODIFYING ITS MATERIAL AND GEOMETRY},
journal = {International Journal of Creative Research Thoughts},
volume = {6},
number = {1},
pages = {903-909},
year = {2018},
month = {February},
issn = {2320-2882},
url = {https://ijcrt.org/viewpaperforall.php?paper=IJCRT1801416}
}
RIS — EndNote, RefWorks
TY - JOUR
AU - K.Sivaramakrishnan
AU - G.Ramakrishna
AU - S.Selvaprakash
AU - Giri, A.Sunil Kumar
TI - DESIGN AND THERMAL ANALYSIS ON ENGINE CYLINDER FIN BY MODIFYING ITS MATERIAL AND GEOMETRY
T2 - International Journal of Creative Research Thoughts
JA - IJCRT
VL - 6
IS - 1
PY - 2018
SN - 2320-2882
UR - https://ijcrt.org/viewpaperforall.php?paper=IJCRT1801416
SP - 903
EP - 909
ER -
Issue
Volume 6 Issue 1,
February-2018
Pages : 903-909
Article Information
- Pages
- 903-909
- Published
- February 2018
- Registration ID
- IJCRT_181087
- Published Paper ID
- IJCRT1801416
- Research Area
- Science & Technology
- Author Type
- Indian Author
- Location
- chennai, tamilnadu, 602003
- Peer Review
- Request Peer Review Report
- Licence
- CC BY 4.0 · Open Access
- ISSN & Impact Factor
- 2320-2882 · IF 9.17
- Downloads
- 1,570
- Permanent Link
- https://ijcrt.org/viewpaperforall.php?paper=IJCRT1801416
- Published Paper PDF
- https://ijcrt.org/papers/IJCRT1801416.pdf
Summarise this Paper with AI
Opens your assistant with a prepared prompt. AI summaries can be incomplete or wrong — read the full paper before citing it.
Author Services
Certificates, printed copies and official reports for this paper
Published authors can request a hard copy of their certificate or of the printed journal, and obtain the transparent peer review and plagiarism reports for this article — each issued against this paper’s registration record.
Registration ID IJCRT_181087Printed copies
Hard Copy of CertificatePrinted certificate for each author, posted to you.
Hard Copy of JournalA bound printed copy of the issue this paper appears in.
Reports & recognition
Transparent Peer Review Report
The reviewer comments and decisions behind this article.
Turnitin Plagiarism Report
The similarity check run on this manuscript.
Best Paper Nomination
Put this article forward for the issue’s best paper award.
Requests are verified against the registration ID of this article.
About Publisher
International Journal of Creative Research Thoughts
Published by IJCRT Publication
2320-2882
ISSN
9.17
Impact Factor
2013
ESTD Year
Open
Access
Impact Factor 9.17, calculated from Google Scholar citation data — see how it is worked out.
An international scholarly open access journal: peer-reviewed, refereed, multidisciplinary, monthly and multilingual, with Crossref DOI registration, rich metadata and a citation generator. Verified indexing & discovery records.
IJCRT is a Transparent, Peer-Reviewed, Open Access Journal (Refereed Journal). Following the discontinuation of UGC and UGC-CARE journal listing, IJCRT is aligned with UGC’s Suggested Parameters for Choosing Peer-Reviewed Journals. UGC Public Notice
Licence
© 2018 — Authors hold the copyright of this article.
This work is licensed under a
Creative Commons Attribution 4.0 International License
and The Open Definition.
This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0),
which permits unrestricted use, distribution and reproduction in any medium, provided the original author and source are credited.
Disclaimer:
The content, data and findings in this article are based on the authors’ research and have been
peer-reviewed for academic purposes only. Readers are advised to verify all information before practical
or commercial use. The journal and its editorial board are not liable for any errors, losses or
consequences arising from its use.
Declarations
Funding
No external funding was received for this study.
Conflict of Interest
The authors declare that they have no conflict of interest.
Acknowledgements
The authors would like to thank the reviewers and the editorial board of International Journal of Creative Research Thoughts for their careful reading and constructive comments, and all colleagues who supported the preparation of this manuscript.
About the Journal
9.17Impact Factor
UGC AlignedSuggested Parameters
TransparentPeer Review
Open AccessNo Paywall
CrossrefDOI Available
Monthly12 Issues / Year
Since 2013Established
2320-2882ISSN
How Publication Works
1Submit Your PaperOnline or by email. A registration ID is issued straight away.
2Transparent Peer ReviewDouble-blind review by subject experts, reported openly.
3AcceptanceThe result reaches you by email and SMS against your registration ID.
4Published Open AccessFree to read worldwide, with certificate and letter ready to download.
Article Impact
20Views
18Downloads
38Total reads
Feb 2018Published
Published · 3,172 days ago
Today · last read yesterday
0.9 views and 0.8 downloads per day over 23 days counted.
Counts exclude identified crawler traffic and repeat hits from the same reader within 30 minutes. Downloads reached directly through a search engine or an existing citation link are not included, so the figure is a conservative count of activity through this site. Full statistics
Discovery & Indexing
Find this paper on search engines and scholarly indexes, and check the journal’s verified records.
Find this paperSearch
Google ScholarExact-title search, with citing articles once indexed.Search
CrossrefMetadata search across all Crossref records.Search
Semantic ScholarAI-powered literature search.Search- BASEBASEBielefeld Academic Search Engine — open-access harvester.Search
ResearchGateResearch network publication search.Search
Journal recordsVerified
“Search” opens a live search for this paper; “Verified” opens a journal record checked on the Indexing & Discovery page. Third-party services index at their own discretion, often several weeks after publication.
