ISSN2320-2882
Impact Factor9.17
UGC ParametersAligned
Low Cost₹1501 / $59
CrossRefDOI
ESTD2013
Peer ReviewTransparent
AccessOpen
Submission: Always Open
Paper Title
A BRIEF REVIEW ON EFFECT OF VARIOUS PARAMETERS ON MATERIAL REMOVAL RATE AND SURFACE ROUGHNESS OF DIFFERENT TOOL CONDITIONS IN ELECTRO DISCHARGE MACHINING BY TAUGHI METHOD
Authors
Samarth Bhaduwala , Neel Prajapati , Nikhil Vyas , Keyur Shah , Kirtan Sukhadia
Keywords
Electric Discharge Machining (EDM), Process Parameters, Optimization, Material Removal Rate, Surface Roughness, Cryogenic Treatment, Taguchi Technique.
Abstract
EDM is an unconventional electro thermal machining process used for manufacturing geometrically complex or hard material parts that are extremely difficult-to-machine by conventional machining process. The process involves a controlled erosion of electrically conductive materials by the initiation of rapid and repetitive spark discharges between the tool and work piece separated by a small gap of about 0.01mm to 0.50mm. This gap is either flooded or immersed in a dielectric fluid. The controlled pulsing of direct current between the tool and the work piece produces the spark discharge. This paper reviews the vast array of research work carried out within past decades for the development of EDM. This study is mainly focused on surface quality and metal removal rate which are the most important parameters from the point of view of selecting the relevant process parameters as well as different heat treatment process. This process will be established for the Better tool life and Better Surface finish.
Full Paper, Downloads & Preview
How To Cite
Choose the style your journal or department asks for, then copy it. Every version below is generated from this paper's own record.
IJCRT — journal style
"A BRIEF REVIEW ON EFFECT OF VARIOUS PARAMETERS ON MATERIAL REMOVAL RATE AND SURFACE ROUGHNESS OF DIFFERENT TOOL CONDITIONS IN ELECTRO DISCHARGE MACHINING BY TAUGHI METHOD", IJCRT - International Journal of Creative Research Thoughts (www.ijcrt.org), ISSN:2320-2882, Vol.5, Issue 4, page no.1607-1612, November 2017, Available :https://ijcrt.org/papers/IJCRT1704207.pdf
APA — 7th edition
Bhaduwala, S., Prajapati, N., Vyas, N., Shah, K., & Sukhadia, K. (2017). A BRIEF REVIEW ON EFFECT OF VARIOUS PARAMETERS ON MATERIAL REMOVAL RATE AND SURFACE ROUGHNESS OF DIFFERENT TOOL CONDITIONS IN ELECTRO DISCHARGE MACHINING BY TAUGHI METHOD. International Journal of Creative Research Thoughts, 5(4), 1607-1612. https://ijcrt.org/viewpaperforall.php?paper=IJCRT1704207
MLA — 9th edition
Bhaduwala, Samarth, et al. "A BRIEF REVIEW ON EFFECT OF VARIOUS PARAMETERS ON MATERIAL REMOVAL RATE AND SURFACE ROUGHNESS OF DIFFERENT TOOL CONDITIONS IN ELECTRO DISCHARGE MACHINING BY TAUGHI METHOD." International Journal of Creative Research Thoughts, vol. 5, no. 4, 2017, pp. 1607-1612, https://ijcrt.org/viewpaperforall.php?paper=IJCRT1704207.
Chicago — 17th, bibliography
Bhaduwala, Samarth, et al. "A BRIEF REVIEW ON EFFECT OF VARIOUS PARAMETERS ON MATERIAL REMOVAL RATE AND SURFACE ROUGHNESS OF DIFFERENT TOOL CONDITIONS IN ELECTRO DISCHARGE MACHINING BY TAUGHI METHOD." International Journal of Creative Research Thoughts 5, no. 4 (2017): 1607-1612. https://ijcrt.org/viewpaperforall.php?paper=IJCRT1704207.
Harvard — author–date
Bhaduwala, S. et al. (2017) 'A BRIEF REVIEW ON EFFECT OF VARIOUS PARAMETERS ON MATERIAL REMOVAL RATE AND SURFACE ROUGHNESS OF DIFFERENT TOOL CONDITIONS IN ELECTRO DISCHARGE MACHINING BY TAUGHI METHOD', International Journal of Creative Research Thoughts, 5(4), pp. 1607-1612. Available at: https://ijcrt.org/viewpaperforall.php?paper=IJCRT1704207
IEEE — numbered reference
S. Bhaduwala, N. Prajapati, N. Vyas, K. Shah and K. Sukhadia, "A BRIEF REVIEW ON EFFECT OF VARIOUS PARAMETERS ON MATERIAL REMOVAL RATE AND SURFACE ROUGHNESS OF DIFFERENT TOOL CONDITIONS IN ELECTRO DISCHARGE MACHINING BY TAUGHI METHOD," IJCRT, vol. 5, no. 4, pp. 1607-1612, Nov. 2017.
Vancouver — biomedical
Bhaduwala S, Prajapati N, Vyas N, Shah K, Sukhadia K. A BRIEF REVIEW ON EFFECT OF VARIOUS PARAMETERS ON MATERIAL REMOVAL RATE AND SURFACE ROUGHNESS OF DIFFERENT TOOL CONDITIONS IN ELECTRO DISCHARGE MACHINING BY TAUGHI METHOD. IJCRT. 2017 Nov;5(4):1607-1612.
AMA — 11th edition
Bhaduwala S, Prajapati N, Vyas N, Shah K, Sukhadia K. A BRIEF REVIEW ON EFFECT OF VARIOUS PARAMETERS ON MATERIAL REMOVAL RATE AND SURFACE ROUGHNESS OF DIFFERENT TOOL CONDITIONS IN ELECTRO DISCHARGE MACHINING BY TAUGHI METHOD. IJCRT. 2017;5(4):1607-1612. Accessed at https://ijcrt.org/viewpaperforall.php?paper=IJCRT1704207
BibTeX — Zotero, Mendeley, LaTeX
@article{IJCRT1704207,
author = {Samarth Bhaduwala and Neel Prajapati and Nikhil Vyas and Keyur Shah and Kirtan Sukhadia},
title = {A BRIEF REVIEW ON EFFECT OF VARIOUS PARAMETERS ON MATERIAL REMOVAL RATE AND SURFACE ROUGHNESS OF DIFFERENT TOOL CONDITIONS IN ELECTRO DISCHARGE MACHINING BY TAUGHI METHOD},
journal = {International Journal of Creative Research Thoughts},
volume = {5},
number = {4},
pages = {1607-1612},
year = {2017},
month = {November},
issn = {2320-2882},
url = {https://ijcrt.org/viewpaperforall.php?paper=IJCRT1704207}
}
RIS — EndNote, RefWorks
TY - JOUR
AU - Bhaduwala, Samarth
AU - Prajapati, Neel
AU - Vyas, Nikhil
AU - Shah, Keyur
AU - Sukhadia, Kirtan
TI - A BRIEF REVIEW ON EFFECT OF VARIOUS PARAMETERS ON MATERIAL REMOVAL RATE AND SURFACE ROUGHNESS OF DIFFERENT TOOL CONDITIONS IN ELECTRO DISCHARGE MACHINING BY TAUGHI METHOD
T2 - International Journal of Creative Research Thoughts
JA - IJCRT
VL - 5
IS - 4
PY - 2017
SN - 2320-2882
UR - https://ijcrt.org/viewpaperforall.php?paper=IJCRT1704207
SP - 1607
EP - 1612
ER -
Issue
Volume 5 Issue 4,
November-2017
Pages : 1607-1612
Article Information
- Pages
- 1607-1612
- Published
- November 2017
- Registration ID
- IJCRT_170672
- Published Paper ID
- IJCRT1704207
- Research Area
- Science & Technology
- Author Type
- Indian Author
- Location
- Vadodara, Gujarat, 390025
- Peer Review
- Request Peer Review Report
- Licence
- CC BY 4.0 · Open Access
- ISSN & Impact Factor
- 2320-2882 · IF 9.17
- Downloads
- 1,476
- Permanent Link
- https://ijcrt.org/viewpaperforall.php?paper=IJCRT1704207
- Published Paper PDF
- https://ijcrt.org/papers/IJCRT1704207.pdf
Summarise this Paper with AI
Opens your assistant with a prepared prompt. AI summaries can be incomplete or wrong — read the full paper before citing it.
Author Services
Certificates, printed copies and official reports for this paper
Published authors can request a hard copy of their certificate or of the printed journal, and obtain the transparent peer review and plagiarism reports for this article — each issued against this paper’s registration record.
Registration ID IJCRT_170672Printed copies
Hard Copy of CertificatePrinted certificate for each author, posted to you.
Hard Copy of JournalA bound printed copy of the issue this paper appears in.
Reports & recognition
Transparent Peer Review Report
The reviewer comments and decisions behind this article.
Turnitin Plagiarism Report
The similarity check run on this manuscript.
Best Paper Nomination
Put this article forward for the issue’s best paper award.
Requests are verified against the registration ID of this article.
About Publisher
International Journal of Creative Research Thoughts
Published by IJCRT Publication
2320-2882
ISSN
9.17
Impact Factor
2013
ESTD Year
Open
Access
Impact Factor 9.17, calculated from Google Scholar citation data — see how it is worked out.
An international scholarly open access journal: peer-reviewed, refereed, multidisciplinary, monthly and multilingual, with Crossref DOI registration, rich metadata and a citation generator. Verified indexing & discovery records.
IJCRT is a Transparent, Peer-Reviewed, Open Access Journal (Refereed Journal). Following the discontinuation of UGC and UGC-CARE journal listing, IJCRT is aligned with UGC’s Suggested Parameters for Choosing Peer-Reviewed Journals. UGC Public Notice
Licence
© 2017 — Authors hold the copyright of this article.
This work is licensed under a
Creative Commons Attribution 4.0 International License
and The Open Definition.
This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0),
which permits unrestricted use, distribution and reproduction in any medium, provided the original author and source are credited.
Disclaimer:
The content, data and findings in this article are based on the authors’ research and have been
peer-reviewed for academic purposes only. Readers are advised to verify all information before practical
or commercial use. The journal and its editorial board are not liable for any errors, losses or
consequences arising from its use.
Declarations
Funding
No external funding was received for this study.
Conflict of Interest
The authors declare that they have no conflict of interest.
Acknowledgements
The authors would like to thank the reviewers and the editorial board of International Journal of Creative Research Thoughts for their careful reading and constructive comments, and all colleagues who supported the preparation of this manuscript.
About the Journal
9.17Impact Factor
UGC AlignedSuggested Parameters
TransparentPeer Review
Open AccessNo Paywall
CrossrefDOI Available
Monthly12 Issues / Year
Since 2013Established
2320-2882ISSN
How Publication Works
1Submit Your PaperOnline or by email. A registration ID is issued straight away.
2Transparent Peer ReviewDouble-blind review by subject experts, reported openly.
3AcceptanceThe result reaches you by email and SMS against your registration ID.
4Published Open AccessFree to read worldwide, with certificate and letter ready to download.
Article Impact
16Views
5Downloads
21Total reads
Nov 2017Published
Published · 3,236 days ago
Today · last read today
0.8 views and 0.3 downloads per day over 20 days counted.
Counts exclude identified crawler traffic and repeat hits from the same reader within 30 minutes. Downloads reached directly through a search engine or an existing citation link are not included, so the figure is a conservative count of activity through this site. Full statistics
Discovery & Indexing
Find this paper on search engines and scholarly indexes, and check the journal’s verified records.
Find this paperSearch
Google ScholarExact-title search, with citing articles once indexed.Search
CrossrefMetadata search across all Crossref records.Search
Semantic ScholarAI-powered literature search.Search- BASEBASEBielefeld Academic Search Engine — open-access harvester.Search
ResearchGateResearch network publication search.Search
Journal recordsVerified
“Search” opens a live search for this paper; “Verified” opens a journal record checked on the Indexing & Discovery page. Third-party services index at their own discretion, often several weeks after publication.
