Volume 9 | Issue 8 |

 Abstract

Nowadays vehicle thefts are increasing all over the world. Everyone is very concerned about securing their vehicles. This paper design and develop vehicle theft control systems used to prevent or control vehicle theft. The system is designed using the mobile phone supplied with the vehicle with a connector to connect the engine control module (ECM) via the control network (CAN) bus, which in turn is transmitted to the ECM. The secure communication mode between the smartphone and the vehicle is carried out via the GSM network. Using a smartphone, the owner can lock or unlock the vehicle and detect it in case of theft. By reading the signal received by the mobile phone, the engine ignition can be controlled and tell owner to immediately lock or turn off the engine. And again, it will return to normal only after entering a strong password. The operation of this circuit is mainly dependent on the MEM sensor. The actual position of the MEM sensor should be 90 degrees with respect to the ground. If there is a change in the actual position of the MEM, a control signal will be sent to the ADC. The ADC converts the analogue signal to digital signal and sends this digital signal to the microcontroller.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Theft Control Unit, GSM, GPS, Control Area Network Bus (CAN), Engine Control Unit (ECU), Mobile Phone, Engine Ignition Control Module (ECM), Subscriber Identity Module (SIM), Data Encryption Standard (DES).

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Fingerprints are the most potent authentic biometrics for personal identification, especially in forensic science. The two major types of 2D minutiae matching that are often applied for fingerprint recognition are ridge ending and bifurcation. This article focuses on employing a 3D Minutiae Matching Technique in conjunction with a 3D Template, commonly known as Minutiae Cylindrical Code (MCC). Cylinders, which are three-dimensional data structures, are the emphasis of this method. A lot of physical data has been shared in this digital era. The goal of this work is to increase the efficiency of fingerprint matching for this reason. We devised a method for reducing Matching Time, Enrolment, Time False Acceptance Rate (FAR), False Rejection Rate (FRR), and False Minutiae detection.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

MCC; FAR; FRR; MATCHING TIME; EXECUTION TIME; ENROLMENT TIME

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

In this era of utmost competition, one among the strategies to be a successful organization is to draw in potential candidates for any particular post and retain the key employees to have a better and highly motivated workforce.So what is the requirement of an organization and managers to attract, retain and motivate a talented workforce? Nowadays, In any industry whether small or big, human resource management not just play its traditional role as such but has expanded its dimensions to assess its employees' performance and manage it with a new system that has evolved due to new developments in the field of HRM known as Performance Management System (PMS). It elaborates how the organization aligns the performance management system with the organizational system and articulates the corporate business objectives to the individual goals. This paper deals with the effectiveness of PMS. The results of the study shows that a performance management system acts as a strategic tool and a strong foundation for the workers to realize their ambitions and organizations to achieve their key financial goals.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Performance Management System, Human Resource Management

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

This paper explains the designs of various CMOS circuit families including Static CMOS circuit, Pseudo NMOS circuit, Domino logic circuit and Dual-Rail Domino logic circuit by using VLSI software: LT Spice XVII with layout tools at 45 nm, 90 nm and 180nm technology node. The working of these circuits is done through VLSI due to its high noise immunity and low static power. This gives us the comparative studies between various circuits and further calculated their delays, average energy. We will calculate the Total power dissipated using Static Power and Dynamic Power. Power Delay Product and Propagation Delay is further measured.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Static CMOS, Dynamic CMOS, Domino Logic CMOS, Dual-Rail Domino Logic CMOS, Average Power, Power Delay Product(PDP), Delay, Area

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

COVID-19, masked face, CAMFD, NVIDIA, Faster-RCNN, SSD Mobilenet, voice alert

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

This Research Paper presents a tool which helps in automation of Reconnaissance and Scanning phase during Penetration Testing. The goal of this tool is to gather as much information about the target as one can in the least amount of time. The bash-script based tool helps in scanning for open ports, web objects, hidden directories and the content-management system used by the target website. Also, a user can add tools to the script according to their recon methodology by simply adding the command used for the tool and appending the result to the output file.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Penetration Testing, Reconnaissance, Scanning, Web Application Testing, Automation

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

The Internet of Things (IoT) is a system of smart sensors that can be used to control and monitor objects from anywhere on the Internet. This sophisticated method can be utilized to boost modern farming's production and quality. As a result, the goal of this study was to offer a novel smart farming application based on the Internet of Things. In this study, a smart agricultural prototype was created to assess the humidity in paddy bags placed in various locations across a farm. The NodeMCU ESP8266 microcontroller and the DHT11 temperature and humidity, MQ135 sensor, Soil moisture sensor, and LDR sensor were used to communicate data to the Blynk server through a Wi-Fi network in this smart capsule. The Dc water pump, exhaust fan, cooling fan, and LED bulb are also some appliances that are also connected can be controlled manually or automatically based on the data collected from the sensors. The Arduino IDE was being used to write the microcontroller's C++ code. The cloud-based dashboard was used to monitor and display real-time humidity data using the Blynk mobile application. The humidity data was examined further and used to create a paddy storage system for the future. Furthermore, when the smart capsule lost contact with the Blynk server, a fast notification was issued to the appropriate parties. As per the results, the developed smart farming and Blynk application can work together efficiently and are suitable for use in smart farming.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Internet of Things, ESP8266, Soil Moisture Sensor, PIR sensors, MQ135 air quality sensor, Blynk.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

Paralysis is an important neural condition that causes the dysfunction of one or two muscles of the body, affecting the selected muscle group or area body or wide and anxious space when you look at the cause. In seeking renewal, focus is also considered to be special in all organs that will assist a person with an impairment to talk correctly. Paralyses patients and unarmed persons often use eye movements to execute basic tasks. This paper is all about the study of mechanical mobility for patients with disabilities in home appliances. The system outlined here utilizes the eye blink device for the detection of eye movement, whatever follows a simple electronic device for the use of the signal mechanism, which adds to the price and assists the reading point of the user. And this used signal is also used as an associate in microcontroller nursing input for home control materials used.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Home Automation, Blinking, Disability, MDN, Microcontroller, Arduino Uno, Wireless, wireless.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

A Mobile Ad hoc Network (MANET) can be addressed by a bunch over coherent groups with group heads (CHs) performing like simulated base-stations, hence forth framing a remote virtual spine. The job of group head is a transitory job, which changes powerfully as the geography or different components influencing it changes. Tracking down the insignificant arrangement of CHs is a NP-Complete issue. In this paper, the study the exhibition trade-offs between two grouping draws near. The first is a basic bunching technique, called Virtual Grid Architecture, which depends on a fixed rectilinear virtual geography, while the subsequent one is an ideal bunching technique. In the 1st stage, for standardized MANETs with an enormous number of clients and under the VGA bunching approach, infer articulations for the quantity of CHs, most pessimistic scenario way length, and normal case way length. We additionally determine articulations for the correspondence overhead. In 2nd, its stage builds up an Integer Linear Program. That tracks down the ideal number of associated CHs in little to medium estimated assorted MANETs. Insightful and recreation results are received from proposed grouping method.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

ad hoc network MANETS.

  License

Creative Commons Attribution 4.0 and The Open Definition

 Abstract

The adaption of the Internet of Things has enabled people to bridge actual objects to the Internet and make people's lifestyles easier. Hackers are familiar with these real-world devices, which make users nervous rather than easy to live. Smart cars are one of the techniques that facilitate our lifestyles, but when an assailant utilizes its flaws, the drivers, as well as the public surrounding us, can suffer seriously. There have been incidents in past years that attackers have targeted Autonomous Vehicles (AVs) that have provided the car full power or network jamming, resulting in loss of knowledge. In this article, we introduce the analysis of a DDoS assault on a network of intelligent autonomous cars in a simulated world. By using our proposed system able to detect the attack in the network to prevent the network issue.

Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Autonomous Vehicles, Cybersecurity, DDoS, Attack Simulation

  License

Creative Commons Attribution 4.0 and The Open Definition