IJCRT( ISSN: 2320-2882 ) | UGC Approved Journal

INTERNATIONAL JOURNAL OF CREATIVE RESEARCH THOUGHTS

International Peer Reviewed, Open Access Journal

ISSN: 2320-2882 | Impact factor: 5.97 | ESTD Year: 2013

ISSN Approved and 5.97 Impact Factor.

Impact Factor
5.97
Login to Author Home

Conference Proceeding - ICGTETM Dec 2017
Volume 5 | Issue 12

  Paper Title: FRICTION STIR WELDING: A REVEIW

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC058

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC058

  Register Paper ID - 171159

  Title: FRICTION STIR WELDING: A REVEIW

  Author Name(s): Mohd Atif Wahid, Rohit Shandley, Ashish Jacob

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 386-393

 Year: December - 2017

 Downloads: 17

 Abstract

Friction stir welding (FSW) is a newly developed solid-state welding method which came into existence in 1991 and has gained a lot of prominence for joining different materials like aluminum, copper, magnesium etc. This process is highly efficient, environmental friendly and has wide applications in the aerospace, shipbuilding and transportation industries. Unlike fusion welding process, FSW does not involve melting of the material, therefore various fusion welding defects are not present in FSW leading to improved mechanical properties of the joint. This paper provides an overview of the FSW process and its variants. The basic principle of FSW is described along with the important process parameter affecting the microstructure and joints properties. Microstructure evolution and some important mechanical properties are also discussed.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Friction Stir Welding, Microstructure, Mechanical Properties, Process parameter

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: DATA HIDING TECHNIQUES: A REVIEW

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC057

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC057

  Register Paper ID - 171158

  Title: DATA HIDING TECHNIQUES: A REVIEW

  Author Name(s): Akanksha Chaturvedi , Shikha Chaudhary , Shyam Lal Jat , Vijay Kr. Sharma

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 382-385

 Year: December - 2017

 Downloads: 16

 Abstract


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: VIRTUALIZATION WITH HYPERVISOR

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC056

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC056

  Register Paper ID - 171157

  Title: VIRTUALIZATION WITH HYPERVISOR

  Author Name(s): Astha Bhardwaj , Rajesh Jain, Anil Dhankar, Vijay Kr. Sharma

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 378-381

 Year: December - 2017

 Downloads: 15

 Abstract

This article deals with the important concept in the development of hardware and software, virtualization technology. In this research paper, the topics covered are, virtualizationand types of virtualization, before and after virtualization impacts, hypervisor, comparison between hypervisor types,advantages of virtualization. Main brick in every virtualization platform is hypervisor which carries out virtualization and management tools which deliver the services such as web management, storage management and resources management from one place


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

hypervisor, virtualization

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: PREVENTING MANET FROM BLACK HOLE ATTACKS WITHIN APPROPRIATE AREA AND TIME

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC055

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC055

  Register Paper ID - 171156

  Title: PREVENTING MANET FROM BLACK HOLE ATTACKS WITHIN APPROPRIATE AREA AND TIME

  Author Name(s): Toofan Mukherjee, Amit Kumar Bairwa, Dr. Sandeep Joshi

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 370-377

 Year: December - 2017

 Downloads: 13

 Abstract

A mobile ad-hoc network (MANET) is a collection of mobile hosts in which wireless network interfaces form a temporary network without the aid of any fixed infrastructure or centralized administration. Due to the characteristics of MANET like dynamic topology, the mobile ad hoc networks are vulnerable to different security threats. One of such security threat is black hole attack which is caused by the malicious nodes which takes part in the network activities. In Black hole attack, a malicious node drops all the traffic in the network to make use of the vulnerabilities of the route discovery packets of the on demand protocols, such as AODV. A black hole is a malicious node that incorrectly replies the route requests that it has a fresh route to destination and when the source node sends packet through it then it drops all the receiving packets. The performance of any protocol in presence of a malicious node heavily depends on the total area and the time of simulation.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

AODV, MANET, Security, Black hole, NS 2

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: ROLE OF MIDDLEWARE TECHNOLOGIES FOR DIFFERENT APPLICATIONS: A STUDY

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC054

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC054

  Register Paper ID - 171155

  Title: ROLE OF MIDDLEWARE TECHNOLOGIES FOR DIFFERENT APPLICATIONS: A STUDY

  Author Name(s): Velmurugan, 2Naol Bakala, Lami Garoma

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 362-369

 Year: December - 2017

 Downloads: 16

 Abstract


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Internet of Things, middleware, semantic model, context-awareness, ubiquitous computing.

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: RECLAMATION OF WASTEWATER WITH CONTEMPORARY AND ECONOMICAL TECHNIQUES IN DEVELOPING COUNTRIES: A CASE STUDY OF ETHIOPIA, EAST AFRICA

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC053

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC053

  Register Paper ID - 171154

  Title: RECLAMATION OF WASTEWATER WITH CONTEMPORARY AND ECONOMICAL TECHNIQUES IN DEVELOPING COUNTRIES: A CASE STUDY OF ETHIOPIA, EAST AFRICA

  Author Name(s): Suraj Kumar Bhagat, Tiyasha, Mr Tibebu Tsegaye Zigale

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 427-432

 Year: December - 2017

 Downloads: 20

 Abstract

Sub-Saharan countries are growing at rapid speed in respect of population and industrialization, among them Ethiopia can be a model. Thisstudy has astounding weighing up all consideration of the different types of wastewatercomplicationssuch as domestic wastewater of major cities of Ethiopia, Universities, textile, coffee processing and irrigational wastewater. Ethiopia is at budding stage in management ofwastewater treatment process. The major cities cumulative wastewater generation is 6,19,912 m3/day, out of which less than 10% is treated. Few new conventional treatment systems were implemented in seven Universities by federal government of Ethiopia but more work as to be done. Agriculture, Textileand coffee industries are the backbone of Ethiopian economy but they also add huge amount pollutants like synthetic organic chemicals, dyes, and organic which is a great challenge to be managed by developing economies. This paper has focussed on various economical techniques to reuse and recover wastewater, so that can be utilized in other purposes. Total organic carbon was reduced by 84% and 49 % using 10% loaded TiO2-Zeolite Y and pristine TiO2 in textile effluent and using bioremediation media have also shown promising results. Avocado peel carbon (APC) reduced COD and BOD by 98.20% and 99.18%, respectively in coffee effluent. When coagulation-flocculationand UV/H2O2/O3 oxidation process was used to treat coffee effluent, COD was reduced by 67% and 87%, respectively. Pesticides are absorbed through anthropogenic microspheres; sediments into water can be treated activated bio-char. These low-cost treatments can improve the life of people


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Textile wastewater, coffee processed wastewater, zeolite, bioremediation, APC and AOP, microspheres, low-cost treatment and activated char.

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: OPTIMIZED SVD BASED IMAGE WATERMARKING USING OPTIMAL PIXEL ADJUSTMENT

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC052

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC052

  Register Paper ID - 171153

  Title: OPTIMIZED SVD BASED IMAGE WATERMARKING USING OPTIMAL PIXEL ADJUSTMENT

  Author Name(s): Nitin kumar, Vijay kumar sharma, 3Kapil Dev Sharma

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 346-353

 Year: December - 2017

 Downloads: 17

 Abstract

Digital image watermarking refers to embedding a digital data into a cover image to later prove the ownership or authentication of the document. Image watermarking find its applications in a number of areas including copyright protection, authentication, scientific analysis, medical analysis etc. to name a few. There are two important issues that watermarking algorithms need to address. Firstly, watermarking schemes are required to provide trustworthy evidence for protecting rightful ownership; Secondly, good watermarking schemes should satisfy the requirement of robustness and resist distortions due to common image manipulations (such as filtering, compression, etc.). In addition to these two requirements, the watermarking must be embedded in such a way so that the perceptible quality of the image will not go below a certain threshold. In past years, a number of image watermarking algorithms have been proposed, based on LSB, DFT, DCT, DWT etc. In this dissertation, a watermarking algorithm is presented to embed watermark in transform domain using SVD transform. SVD transform is a type of compression in which singular values of a matrix are approximated, thereby implementing a lossy compression at the cost of image quality. In this dissertation, U matrix is used for watermark embedding, by redundantly embedding the watermark bits in the 4X4 non overlapping blocks of the image. Thus, the effect of 4 bits of payload data is scattered to 10 pixels of the cover watermark image thereby giving a smooth embedding with high fidelity


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Image watermarking, SVD, Orthogonally

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: DESIGN AND ANALYSIS OF RIPPLE CARRY ADDER AND CARRY LOOK AHEAD ADDER USING ADIABATIC TECHNOLOGY

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC051

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC051

  Register Paper ID - 171152

  Title: DESIGN AND ANALYSIS OF RIPPLE CARRY ADDER AND CARRY LOOK AHEAD ADDER USING ADIABATIC TECHNOLOGY

  Author Name(s): Kuldeep Singh Shekhawat, Gajendra Sujediya

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 337-345

 Year: December - 2017

 Downloads: 17

 Abstract

Adder is a unit block in the designing of the digital circuit design. Half adder and Full adder is mostly used in the addition and addition of product term in the multiplication. Mostly Ripple carry adder and Carry Look Ahead adder is used for addition of four bits. RCA consumes the least power but is the slowest (propagation delay is the most) while the CLA is the fastest but requires more power. A CLA is designed using the reversible Adiabatic logic which results in the power consumption as well as the propagation delay in a practical and usable range and is preferred over RCA and other adders


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Full Adder, Ripple Carry Adder, Carry look ahead Adder, Adiabatic logic

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: SEGMENTATION TECHNIQUE TO DETECTION MICROCALCIFICATION IN MAMMOGRAMS

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC050

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC050

  Register Paper ID - 171151

  Title: SEGMENTATION TECHNIQUE TO DETECTION MICROCALCIFICATION IN MAMMOGRAMS

  Author Name(s): Ashok Singh Chundawat, Rahul kumar Malee, Ravita Saraswat, Shailendra Shrivastava

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 331-336

 Year: December - 2017

 Downloads: 20

 Abstract

Breast cancer is the most common cancer among women. Early detection of breast cancer increases the chances of survival. Early detection of microcalcification forecast about cancer and reduction in mortality. Mammography is the best diagnostic technique for screening breast cancer. However, the interpretation of mammograms is not easy because of small differences in densities of different tissues within the image. This is especially true for dense breasts. For early detection of mammograms segmentation is very useful. This paper is contains early detection of microcalcification by analyzing mammographic images using Foveal segmentation. This analysis could provide radiologists a better understanding , if it is detected at an early stage than it is decrease in mortality.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Microcalcification; Early detection; Breast density; Foveal segmentation.

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: CFD BASED INVESTIGATION OF THERMAL PERFORMANCE OF SHELL AND TUBE HEAT EXCHANGER WITH CHARGING PCM

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC049

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC049

  Register Paper ID - 171150

  Title: CFD BASED INVESTIGATION OF THERMAL PERFORMANCE OF SHELL AND TUBE HEAT EXCHANGER WITH CHARGING PCM

  Author Name(s): Pintu, Harimohan Sharma

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 418-426

 Year: December - 2017

 Downloads: 16

 Abstract

Heat transfer from one fluid to another is important application in engineering science, various type of heat exchanger devices were developed by engineers from previous decades. Research on these devices continues in present era to improve thermal performance. Various shapes are used by engineers to improve thermal performance. Main common shapes are like simple straight heat exchanger, curved shape shell heat exchanger, twisted shape shell exchanger, custom shape heat exchanger. Simple shell and tube heat exchanger was use to validate the experimental results with CFD results. Experimental validation proves that CFD is effective tool for thermal performance investigation. After experimental validation, main research work was focused on effect of latent heat on thermal performance improvement of simple shell and tube heat exchanger using PCM materials in it. Co-relation equations are developed for both shapes of response conditions with linear fitting tool available in MINITAB coding software. Proper instrumentation and calibration was take care in this study. CFD simulation was carried out on ANSYS FLUENT software


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Thermal performance, CFD and Phase change Material (PCM)

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: PERFORMANCE ANALYSIS OF TRAFFIC ORIENTED PCF IN WIRELESS LOCAL AREA NETWORK

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC048

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC048

  Register Paper ID - 171149

  Title: PERFORMANCE ANALYSIS OF TRAFFIC ORIENTED PCF IN WIRELESS LOCAL AREA NETWORK

  Author Name(s): Vikash Kaler , Amit Kumar Bairwa , Kapil Dev Sharma

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 312-318

 Year: December - 2017

 Downloads: 15

 Abstract


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

PCF, WLAN, QoS, Delay, TOPCF.

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: DESIGN A BATTERY MONITORING SYSTEM FOR LEAD-ACID BATTERY

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC047

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC047

  Register Paper ID - 171148

  Title: DESIGN A BATTERY MONITORING SYSTEM FOR LEAD-ACID BATTERY

  Author Name(s): Niraj Agarwal, Phulchand Saraswati, Ashish Malik, Yogesh Krishan Bhateshvar

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 306-311

 Year: December - 2017

 Downloads: 17

 Abstract

An efficient energy-management system for Lead Acid Battery, using Matlab and Arduino, was developed and tested. The system uses an ACS712 sensor to detect current and voltage in the circuit while LM35 Thermistor is used to detect the temperature. The data output from these sensors is stored and manipulated through Arduino (microcontroller). The State of charge (SOC) of the battery is the index which shows the amount of charge present in the battery. The SOC depends upon various parameters, such as current, voltage, temperature and pressure. In this experiment the temperature, current and voltage are considered for determining the SOC.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

State Of Charge (SOC), Electric Vehicle (EV), Open Circuit Voltage (OCV), Battery Monitoring System (BMS), Lead-Acid Battery.

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: THEORETIC BASED EXPONENTIAL INFORMATION DIVERGENCE MEASURE AND INEQUALITIES

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC046

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC046

  Register Paper ID - 171147

  Title: THEORETIC BASED EXPONENTIAL INFORMATION DIVERGENCE MEASURE AND INEQUALITIES

  Author Name(s): K.C.Jain, Devendra Singh

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 295-305

 Year: December - 2017

 Downloads: 18

 Abstract


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: DESIGN ISSUE WITH MULTIMEGAWATT WIND TURBINE AND WIND PARK

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC045

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC045

  Register Paper ID - 171146

  Title: DESIGN ISSUE WITH MULTIMEGAWATT WIND TURBINE AND WIND PARK

  Author Name(s): Ashish Jaiswal, Harish Kumar Maheshwari, Narendra Saini

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 291-294

 Year: December - 2017

 Downloads: 19

 Abstract

Multimegawatt wind-turbine systems, frequently organized in a wind park, are the backbone of the power generation based on renewable-energy systems. In this paper the most-adopted wind-turbine systems, the adopt generators, the topologies of the converters, the generator control and grid connection issues, as well as their arrangement in wind parks.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Control, generators, power converters, wind.

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: STUDY ON CONTROL OF A DC-SERVOMOTOR WITH SLIDING MODE CONTROLLER

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC044

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC044

  Register Paper ID - 171160

  Title: STUDY ON CONTROL OF A DC-SERVOMOTOR WITH SLIDING MODE CONTROLLER

  Author Name(s): Green Maraiya

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 412-417

 Year: December - 2017

 Downloads: 19

 Abstract

The main objective of this paper is to control the speed of separately excited DC Motor using a Sliding mode controller based on VSS approach. This controller is based on variable structure systems which aim at reducing the peak overshoot, steady state error and settling time of a DC Motor. The simulation results show that Sliding mode controller is superior than PI for speed control of DC motor. Since the SMC is robust in presence of disturbances, the desired speed is perfectly tracked.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Variable structure control, Sliding mode controller, DC motor drives.

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: AN OVERVIEW OF OPPORTUNITIES WITH THE SMART GRID - FUTURE ELECTRICAL POWER SYSTEMS

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC043

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC043

  Register Paper ID - 171144

  Title: AN OVERVIEW OF OPPORTUNITIES WITH THE SMART GRID - FUTURE ELECTRICAL POWER SYSTEMS

  Author Name(s): Harish Kumar Maheshwari, Ashish Jaiswal, Gajendra Sujedia

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 279-284

 Year: December - 2017

 Downloads: 14

 Abstract

Introduction of Smart Grids makes the operation of grid smarter and astute. An appropriate deployment of smart grid can provide new boulevard and chances for the development of power system in the country like India. The important feature of smart grid system is the implementation of improved technologies (i.e. smart meters) which enables power system with relevant, real-time information. Smart grid is considered as the future generation power grid, which enables the electrical power systems with bi-directional flow of electrical energy as well as information, with improves the security, reliability and ultimately the operational efficiency of electrical power system from generation to transmission and finally to distribution. Smart Grid techniques allow utilities to discern and rectify a different system issues using a single coherent, reliable Smart Grid platform. This paper basically provides an overview of opportunities with smart grid and technologies being used for implementation of smart grid.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Smart Grid, Metering, Power System, Information flow and system reliability

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: AN ANALYTICAL STUDY OF NOISE REMOVAL TECHNIQUES ON VARIOUS TYPES OF MEDICAL IMAGES

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC042

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC042

  Register Paper ID - 171143

  Title: AN ANALYTICAL STUDY OF NOISE REMOVAL TECHNIQUES ON VARIOUS TYPES OF MEDICAL IMAGES

  Author Name(s): Santosh Singh, Ritu Vijay

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 272-278

 Year: December - 2017

 Downloads: 15

 Abstract

Low-contrast images in medical imaging would be acquired commonly, which may interfere with the regular diagnosis. Improvement with enhancement is one of the key tools in medical image analysis. The enhancement during the preprocessing stage includes contrast improvement, brightness and noise removal or to provide enhanced input for further automated image processing procedures. The chief motive of performing the image enhancement is to reveal the hidden information in feature or to enhance the low contrast image. This study is yield in two different medical modalities CT-scan, and X-ray. Analytical computation of different filters between original image and filtered image by calculating PSNR and MSE of all these medical images shows the performance of filters. This experimental study which is performed, can improve the accuracy of medical images (X-ray, CT-scan) for easy detection of disease.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Low-contrast images, noise removal, PSNR, MSE

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: CONPREHENSTAIVE ALGORITHMS OF CLUSTERING TECHNOLOGY : A REVIEW

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC041

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC041

  Register Paper ID - 171142

  Title: CONPREHENSTAIVE ALGORITHMS OF CLUSTERING TECHNOLOGY : A REVIEW

  Author Name(s): Hemant Rathore, Manoj kumar, Pooja Singh

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 269-271

 Year: December - 2017

 Downloads: 19

 Abstract

Data analysis is used as a common method in modern science research, which is through communication science, computer science and biology science. Clustering, as the basic composition of data analysis, plays a significant role. On one hand, many tools for cluster analysis have been designed, along with the information increase and subject intersection. On the other hand, each clustering algorithm has its own strengths and weaknesses, due to the complexity of information. In this review paper, we initiate at the explanation of clustering, take the primary elements involved in the clustering process, such as the distance or similarity measurement and evaluation indicators, into consideration, and analyse the clustering algorithms from two perspectives, the traditional ones and the modern ones. All the discussed clustering algorithms will be compared in detail and comprehensively


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Clustering, k-means, Gaussian (EM), Fuzzy, Quality Threshold (QT) , Agglomerative Hierarchical, DBSCAN, DIANA, AGNES .

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: A REVIEW ON DATA ANALYSIS TECHNOLOGIES AND PLATFORMS

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC040

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC040

  Register Paper ID - 171135

  Title: A REVIEW ON DATA ANALYSIS TECHNOLOGIES AND PLATFORMS

  Author Name(s): Manoj Kumar, Hemant Rathore

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 266-268

 Year: December - 2017

 Downloads: 12

 Abstract


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Data Analysis, Exploratory Analysis,Trend Analysis, Data Analysis as a Linear Process, Data Analysis as a Cycle Process.

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: ETHERNET MONITORING SYSTEM BASED ON EMBEDDED WEB SERVER

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC039

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC039

  Register Paper ID - 171134

  Title: ETHERNET MONITORING SYSTEM BASED ON EMBEDDED WEB SERVER

  Author Name(s): Ravi kant Kumar

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 262-265

 Year: December - 2017

 Downloads: 13

 Abstract

In this system, power network parameters are remotely monitored by the existing resource of Ethernet. A practical design of embedded Web server for power network monitoring is introduced, which applies high speed MCU (SX52BD) to conveniently link to Ethernet. Adopting Ethernet interface control mode, the remote network monitoring of power network is realized under Windows.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Ethernet; embedded Web server, monitoring system; TCP/IP protocol

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: E-SMART BIN TECHNOLOGY & WASTE SEGREGATION SYSTEM

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC038

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC038

  Register Paper ID - 171133

  Title: E-SMART BIN TECHNOLOGY & WASTE SEGREGATION SYSTEM

  Author Name(s): Snehashis Jha

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 258-261

 Year: December - 2017

 Downloads: 13

 Abstract

In the recent decades, Urbanization has increased tremendously. At the same phase there is an increase in waste production. Waste management has been a crucial issue to be considered. This paper is a way to achieve this good cause. In this paper, smart bin is built on a microcontroller based platform Arduino Uno board which is interfaced with GSM modem and Ultrasonic sensor. Ultrasonic sensor is placed at the top of the bin which will measure the stature of the bin. The threshold stature is set as 10cm. Arduino will be programmed in such a way that when the bin is being filled, the remaining height from the threshold height will be displayed. Once the garbage reaches the threshold level ultrasonic sensor will trigger the GSM modem which will continuously alert the required authority until the garbage in the bin is squashed.. At regular intervals bin will be squashed. Another serious peril that follows is the escalating amount of waste generated each minute by an individual. An astounding 0.1 million tonnes of waste is generated each day in India. Sadly, only 5% of this colossal amount of waste is recycled. One possible solution for this problem could be segregating the waste at the disposal level itself. In India, the collection, transportation and disposal of MSW are unscientific and chaotic. This has found to reduce the average life span of the manual segregators. Developing a mechanized system to help save the lives of many and making the world a cleaner and a greener place is the noble objective of this research. Thus the proposed work focuses on an automatic waste segregator that aims at segregating the waste at the disposal level itself.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

smart bin, smart city, e-bin, waste management, Audrino UNO

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: SURFACE MODIFICATION OF CRUMB RUBBER AND ITS INFLUENCE ON THE MECHANICAL PROPERTIES OF RUBBER-CEMENT CONCRETE

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC037

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC037

  Register Paper ID - 171164

  Title: SURFACE MODIFICATION OF CRUMB RUBBER AND ITS INFLUENCE ON THE MECHANICAL PROPERTIES OF RUBBER-CEMENT CONCRETE

  Author Name(s): KHUSHBU TAK, UTTAM PANCHORI

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 404-411

 Year: December - 2017

 Downloads: 17

 Abstract

In this paper, a surface modification method was proposed to introduce strong polarity groups to rubber surface to generate a strong chemical bond between the rubber and the cement matrix. Rubber was first oxidized with KMnO4 solution and then sulphonated with NaHSO3 solution. The Fourier transform-infrared (FT-IR) spectra and contact angle measurement showed that the oxidation and sulphonation process introduced a large number of hydrophilic hydroxyl and sulfonate to crumb rubber and decreased the contact angle between rubber surface and water, thus greatly improved the interfacial bonding strength between crumb rubber and cement paste. After the rubber surface modification, the adhesion strength of the rubber and cement paste was increased by 41.1%. It was also found in the mechanical tests that the rubber surface modification was quite useful to enhance the compressive strength and impact strength of rubber-cement concrete. The compressive strength of the concrete with 4% modified rubber powder was 48.7% higher than that with ordinary rubber powder. Based on the results, it is concluded that the surface modification of crumb rubber with KMnO4 and NaHSO3 solutions is an effective method to improve the mechanical properties of rubber-cement concrete.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

RUBBER-CEMENT ,CONCRETE

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: IRRIGATION SCHEDULING USING CROPWAT

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC036

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC036

  Register Paper ID - 171165

  Title: IRRIGATION SCHEDULING USING CROPWAT

  Author Name(s): Sonu Kumari

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 394-403

 Year: December - 2017

 Downloads: 15

 Abstract

Water is becoming a scarce resource as a result of the growing demand in various purposes such as hydropower, irrigation, and water supply etc. With growing population the demand of water for various purposes is ever increasing. On the other hand, the availability of water of water resources is limited in space and time. A systematic and scientific planning for its optimal utilization is high imperative. Use of modern techniques in irrigation will go a long way in economizing consumption and saving of water which will bring greater areas under command and will ultimately result in more agricultural yield. Water requirements and irrigation scheduling of major crops, namely, Sugarcane, Rice, Tobacco, etc. are determined using the CROPWAT model.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Cropwat,Irrigation scheduling, Cropwater Requirement,Evapotranspiration,Iffective Rainfall

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: EXPERIMENTAL INVESTIGATIONS OF COARSE AGGREGATE RECYCLED CONCRETE

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC035

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC035

  Register Paper ID - 180008

  Title: EXPERIMENTAL INVESTIGATIONS OF COARSE AGGREGATE RECYCLED CONCRETE

  Author Name(s): AJAY JAIN

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 223-231

 Year: December - 2017

 Downloads: 12

 Abstract


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

EXPERIMENTAL INVESTIGATIONS OF COARSE AGGREGATE RECYCLED CONCRETE

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: DESIGN & ANALYSIS OF CIRCULAR PATCH ANTENNA FOR KU-BAND APPLICATIONS

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC034

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC034

  Register Paper ID - 171132

  Title: DESIGN & ANALYSIS OF CIRCULAR PATCH ANTENNA FOR KU-BAND APPLICATIONS

  Author Name(s): Yashika Saini, Harshal Nigam

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 219-222

 Year: December - 2017

 Downloads: 14

 Abstract

In this paper a circular microstrip antenna is designed for Ku band application. The design consists of a Circular patch having elliptical slot with defected ground substrate. It is observed through analysis that dimensions & slots are key factor for improving the bandwidth of this geometry. The antenna is fabricated on FR4 Substrate & S-parameters are optimized.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Circular Antenna, Defected ground, Elliptical slot, Ku band, Microstrip.

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: SIMULTANEOUS EFFECTS OF FIBER AND GLASS ON THE MECHANICAL PROPERTIES OF SELF-COMPACTING CONCRETE

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC033

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC033

  Register Paper ID - 171131

  Title: SIMULTANEOUS EFFECTS OF FIBER AND GLASS ON THE MECHANICAL PROPERTIES OF SELF-COMPACTING CONCRETE

  Author Name(s): DEEPAK PAREEK, Amit Kumar Bairwa, Mukesh Choudhary

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 209-218

 Year: December - 2017

 Downloads: 13

 Abstract


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

CONCRETE, FIBERS, AGGREGATES, COMPREHENSIVE STRENGTH

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: A LITERATURE SURVEY OF NETWORK SIMULATION TOOLS

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC032

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC032

  Register Paper ID - 171130

  Title: A LITERATURE SURVEY OF NETWORK SIMULATION TOOLS

  Author Name(s): Nimisha Swami, Amit Kumar Bairwa, Mukesh Choudhary

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 206-208

 Year: December - 2017

 Downloads: 13

 Abstract

In the network research era, it is very difficult to deploy a network very efficiently as it takes too much time as well as money. Network simulation tool is the best source to develop a network as it helps a developer to check the functionality of a network in real environment. Thus simulator reduces the time as well as cost of testing of a network. In this paper, we provide the different simulation tools, their advantages and disadvantages. This survey is a approach to give advantage for those who feel difficulties to select the appropriate network simulator.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Network simulator, NS2 ,NS3, OMNET++ ,OPNET, QualNet.

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: ESTIMATION OF REGRESSION MODEL FOR THE SUSCEPTIBLE TRANSITIONS OF COMPLEX SYSTEMS

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC031

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC031

  Register Paper ID - 171124

  Title: ESTIMATION OF REGRESSION MODEL FOR THE SUSCEPTIBLE TRANSITIONS OF COMPLEX SYSTEMS

  Author Name(s): Anil Dhankhar, Akshya Raj Choudhary

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 202-205

 Year: December - 2017

 Downloads: 15

 Abstract


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Regression model, lanthanides, spectra

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: A CRITICAL REVIEW FOR BLOOMING MULTI-HOME ALARM STRUCTURE FOR MOBILE TECHNOLOGY

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC030

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC030

  Register Paper ID - 171125

  Title: A CRITICAL REVIEW FOR BLOOMING MULTI-HOME ALARM STRUCTURE FOR MOBILE TECHNOLOGY

  Author Name(s): Gajendra Sujediya, Harish Kumar Maheshwari, Narendra Saini, Ashish Jaiswal

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 196-201

 Year: December - 2017

 Downloads: 13

 Abstract

The paper is presenting development of a microcontroller-based multi-home alarm system that can be detect smoking. Addition of local materials are considered. The text message is displayed by developed prototype whenever smoke or intrusion was detected. Developmental research design was used to come up with a working prototype of the designing. For testing the smoke alarm, the system was exposed to different burning materials such as paper, wood, plastic, cloth and rubber; and to test the intrusion alarm, the system was placed at different distances. Based from the findings of the study, all materials acquired locally were able to function properly. The system was found to be consistent and efficient with data transmission, processing and reception. Response time of less than 20 seconds for smoke alarm and less than 2 seconds for lock mechanism were recorded. The system instantly sent notification messages to the user after fire and proximity sensors were triggered


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Mobile technology, smoking detector, smoking alarm, microcontroller, US sensor, ionization sensor device.

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: DESIGN AND ANALYSIS OF CHIP BASED DEMULTIPLEXER USING VLSI DESIGN SYSTEM

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC029

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC029

  Register Paper ID - 171122

  Title: DESIGN AND ANALYSIS OF CHIP BASED DEMULTIPLEXER USING VLSI DESIGN SYSTEM

  Author Name(s): Omprakash

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 189-195

 Year: December - 2017

 Downloads: 13

 Abstract

This paper discusses the design of an Integrated Circuit (IC) based for a Demultiplexer. The based was designed by using an open source software namely Electric VLSI Design System as the Electronic Design Automation (EDA) tool. In order to produce the based, the basic knowledge of fabrication process and IC design rules are expounded. The complete based of the Demultiplexer was designed based on its schematic circuit, which consists of NOT gates, 2-input NAND gates, 3-input NAND gates, 4-input NAND gates, 2-input AND gates and 3-input AND gates. The based had undergone Design Rule Check (DRC) set by the Electric VLSI Design System to check for any design rule error. Both based and schematic circuit of the Demultiplexer were then simulated through Based versus Schematic (LVS) to ensure they were identical. LT spice is used as simulator to carry out the simulation work and verify the validity of the function. The simulation output indicated that results of the based and schematic circuit for Demultiplexer were essentially identical and matches the theoretical results.?


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Demultiplexer, schematic circuit, IC based, electric VLSI Design System, NAND gates, AND gates and simulation output

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: APPLICATION OF LEAN MANUFACTURING BY VALUE STREAM MAPPING

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC028

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC028

  Register Paper ID - 171121

  Title: APPLICATION OF LEAN MANUFACTURING BY VALUE STREAM MAPPING

  Author Name(s): Shweta Sharma, Mahesh Kumar Jangid

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 182-188

 Year: December - 2017

 Downloads: 12

 Abstract

In this paper, the outcome of a ball industry has been increased by using the principles of lean manufacturing. As the lean manufacturing implies the reduction of waste with in the manufacturing process by categorizing all the activities and processes into three fields namely value adding, non-value adding & non-value adding but necessary. The methodology used for the project is to first prepare the current state map by collecting data from the shop floor and then analyzing it for the possible areas of improvements. After that the analysis and comparison of the suggested solutions with the old one has been done and finally proposed the future state map.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Value stream mapping, Supermarket pull system, capacity utilization

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: ADVANCES IN ACTIVE SUSPENSION SYSTEM

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC027

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC027

  Register Paper ID - 171119

  Title: ADVANCES IN ACTIVE SUSPENSION SYSTEM

  Author Name(s): Abhishek Goyal, Ashish Sharma

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 177-181

 Year: December - 2017

 Downloads: 13

 Abstract

Suspension systems are now one of the inevitable sections in the automotive industry which are accountable for the ride safety and comfort and progressive research and development in this field seems unremitting. This paper bullseye the active suspension systems of an automobile. It addresses how active suspensions overthrow the conventional passive suspensions and its advancement for practical implementations. It focusses on the need, concept and current trends of the active suspension system. This is a study which encompasses the growth of active suspension, enunciating the best available choices of actuators and control methods in these suspensions and directing towards the possibilities of further improvements.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Active suspension system, passive suspension system, actuators and control methods

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: CONTROL OF UNIFIED POWER FLOW CONTROLLER FOR POWER SYSTEM OSCILLATIONS USING LEAD LAG CONTROLLER TUNED OF PSO

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC026

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC026

  Register Paper ID - 171118

  Title: CONTROL OF UNIFIED POWER FLOW CONTROLLER FOR POWER SYSTEM OSCILLATIONS USING LEAD LAG CONTROLLER TUNED OF PSO

  Author Name(s): Garima Verma, Surabhi Agrawal

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 172-176

 Year: December - 2017

 Downloads: 12

 Abstract

This system proposes an application of Unified Power Flow Controller (UPFC) in order to voltage support and also enhancement of stability in system. Lead lag controller is considered for UPFC control and the parameters of lead lag controller are tuned using Particle Swarm Optimization (PSO). The optimal design problem is formulated as an optimization problem, and particle swarm optimization (PSO) is used to search for the lead lag controller parameters. To show the ability of UPFC in voltage control and also stability enhancement, the results of the system are compared with and without UPFC.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

UPFC, Lead lag controller, Particle Swarm Optimization (PSO).

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: CERAMIC MATERIALS: PROCESSING, JOINING AND APPLICATIONS

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC025

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC025

  Register Paper ID - 171117

  Title: CERAMIC MATERIALS: PROCESSING, JOINING AND APPLICATIONS

  Author Name(s): Tanveer Majeed, Mohd Atif Wahid, Nidhi Sharma

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 166-171

 Year: December - 2017

 Downloads: 15

 Abstract

Ceramics form an important part of material groups. The growth of appropriate joining methods to self-bond hard ceramics or for bonding ceramic to metals has been a major target, aiming at cutting edge applications of ceramics such as engine components and advanced gas turbines. When bonding ceramics, the main difficulty is to get an intimate contact between the materials to be joined and when joining dissimilar materials and specially ceramics to metals, the main concern is the development of high residual stresses in the considered materials. Today a range of joining methods has been developed for joining ceramic to ceramic or ceramic to metal. In this paper processing, joining methods and application of ceramic materials in various fields are discussed.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Ceramic, Joining methods, Welding, Applications, Thermal expansion coefficients

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: SURVEY ON INDEXING TECHNIQUES OF DATA WAREHOUSE

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC024

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC024

  Register Paper ID - 171166

  Title: SURVEY ON INDEXING TECHNIQUES OF DATA WAREHOUSE

  Author Name(s): 1Nirmala Dhinwa, 2Bhawana Jarthalia

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 160-165

 Year: December - 2017

 Downloads: 15

 Abstract

Data warehouse system is becoming progressively important for decision-makers. Most of the queries against a large data warehouse are complex and iterative. The ability to answer these queries efficiently is a critical issue in the data warehouse environment. If the right index architecture are built on columns, the performance of queries, especially ad hoc queries will be greatly enhanced. In this paper, we provide a survey of various indexing techniques such as B-tree, Bit-mapped, Join and Projection index being studied/used in both academic research and industrial applications. With the beginning of powerful new indexing technologies, instant and ad-hoc queries and fast data analysis are possible using existing databases. Despite the good customer service and data analysis capabilities, many customer services and data warehousing applications lack good performance. To meet this task in business applications such as customer services, e-commerce etc., data warehouses must deliver data quickly through user friendly methods.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Data warehouse, Bitmap index, B-tree index, encoded bitmap,

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: PREPARATION METHODS FOR NANOFLUIDS AND THERE STABILITY

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC023

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC023

  Register Paper ID - 171114

  Title: PREPARATION METHODS FOR NANOFLUIDS AND THERE STABILITY

  Author Name(s): Bhimraj Rathodiya, Sunny Vishnoi

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 155-159

 Year: December - 2017

 Downloads: 14

 Abstract

Nanofluids, the fluid suspensions of nanomaterials, have shown many interesting properties, and the distinctive features that offer unprecedented potential for many applications in industry as well as research. This paper summarizes the recent progress on the study of nanofluids, such as the preparation methods, the evaluation methods for the stability of nanofluids, and the ways to enhance the stability for nanofluids, the stability mechanisms of nanofluids, and presents the broad range of current and future applications in various fields which includes energy and mechanical and biomedical fields. At last, the report identifies the opportunities for future research. Nanofluids as a kind of new engineering material consisting of nanometer-sized additives and base fluids that have attracted great attention of researchers for its superior thermal properties and many potential applications. Many researches on nanofluids were investigated and especially some interesting phenomena, new experimental results and theoretical study on nanofluids, in which consistent and inconsistent even contrary conclusions were reported, have been presented in literature.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Nanofluids, thermophysical, nanotubes, Preparation methods, Stability.

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: SOLAR ENERGY REAPING MACHINE FOR WIRELESS SENSOR NETWORKS

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC022

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC022

  Register Paper ID - 171222

  Title: SOLAR ENERGY REAPING MACHINE FOR WIRELESS SENSOR NETWORKS

  Author Name(s): Arpita Sharma, Ashish Jaiswal, Harish Kumar Maheshwari

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 148-154

 Year: December - 2017

 Downloads: 13

 Abstract


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Boost converter, WSN, EnerChip EH Module, PV system, Rechargeable storage batteries.

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: FRICTION STIR WELDING

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC021

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC021

  Register Paper ID - 171113

  Title: FRICTION STIR WELDING

  Author Name(s): MAHENDRA KUMAR JANGID, Mr. SHARAD SRIVASTAVA , Mr. MAHESH KUMAR JANGID

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 139-147

 Year: December - 2017

 Downloads: 13

 Abstract

Friction Stir Welding (FSW) is a solid state joining process that involves joining of metals without fusion or filler materials. The frictional heat is produced from a rapidly rotating non-consumable high strength tool pin that extends from a cylindrical shoulder. The process is particularly applicable for aluminium alloys but can be extended to other products also. Plates, sheets and hollow pipes can be welded by this method. The process is also suitable for automation. The weld produced is of finer microstructure and superior in characteristics to that parent metal. FSW finds application in shipbuilding, aerospace, railway, electrical and automotive industry. The limitations of FSW are reduced by intensive research and development. Its cost effectiveness and ability to weld dissimilar metals makes it a commonly used welding process in recent times.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Nanofluids, thermophysical

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: DESIGN AND DEVELOPMENT OF LIQUID IMPEDANCE ANALYZER IN DSPIC MICROCONTROLLER

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC020

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC020

  Register Paper ID - 171110

  Title: DESIGN AND DEVELOPMENT OF LIQUID IMPEDANCE ANALYZER IN DSPIC MICROCONTROLLER

  Author Name(s): Harish Kumar Maheshwari, Ashish Jaiswal

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 134-138

 Year: December - 2017

 Downloads: 15

 Abstract

Liquid impedance measurement is one of the most important parameter for detecting the diseases in the blood or fuel impurity. The Impedance of the liquid is measure with the help of IC AD5934. The AD5934 is a high precision impedance converter IC. This chip can be configured and controlled by a dsPIC microcontroller 30F6014. The Real and Imaginary values are processed by microcontroller and results are sent to computer using UART. User is able to set various frequencies using computer. This Liquid Impedance Analyzer instrument can also be used for various impedance analysing applications.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

LIA, dsPIC, UART, DFT.

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: CONCEPTUAL DESIGN APPROACH OF AGRICULTURAL AIRCRAFTS

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC019

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC019

  Register Paper ID - 171108

  Title: CONCEPTUAL DESIGN APPROACH OF AGRICULTURAL AIRCRAFTS

  Author Name(s): Nidhi Sharma, Dr. K Tamil Manna

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 122-133

 Year: December - 2017

 Downloads: 17

 Abstract

The paper summarises the conceptual designing approach of an agricultural aircraft intended to use for agricultural industry needs. The agricultural aircraft flies at a very low altitude for most of the part of their flight time. Their designing is critically important to maintain a very little room for errors. The proposed design is efficiently workable in highly variable loading conditions also.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Agriculture; Altitude; Aviation;Drag;Lift

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: LOW POWER CONSUMPTION USING CMOS VLSI DESIGN IN MODERN TRENDS

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC018

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC018

  Register Paper ID - 171106

  Title: LOW POWER CONSUMPTION USING CMOS VLSI DESIGN IN MODERN TRENDS

  Author Name(s): Ankita Kumari, Gajendra Sujediya

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 118-121

 Year: December - 2017

 Downloads: 13

 Abstract


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Static dissipation, Dynamic dissipation, Power-Delay.

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: IMPROVEMENT OF VOLTAGE PROFILE AND REDUCTION OF POWER LOSSES BY OPTIMAL PLACEMENT OF TCSC DEVICE BY USING GA

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC017

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC017

  Register Paper ID - 171093

  Title: IMPROVEMENT OF VOLTAGE PROFILE AND REDUCTION OF POWER LOSSES BY OPTIMAL PLACEMENT OF TCSC DEVICE BY USING GA

  Author Name(s): Tushar Agarwal, Amarpreet singh

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 110-116

 Year: December - 2017

 Downloads: 16

 Abstract

Flexible Alternating Current Transmission Systems (FACTS) devices have been proposed to be effective for controlling power flow and regulating bus voltage in electrical power systems, resulting in an increased power transfer capability, low system losses. Voltage variations can be stabilized and controlled by providing required reactive power. The low voltages reduce the power transfer through the transmission lines and may lead to Instability. Hence FACTS Controllers are widely used in Interconnected Power Systems to control the voltage levels within the tolerable limits. Placement of these devices in suitable location can lead to control in line flow and maintain bus voltages in desired level and so improve voltage stability margins. This paper presents the GA optimization technique to find optimal location of TCSC device for reduction of power losses so thereby improves the voltage profile of the power system network. The optimizations are performed on two parameters: the location of the devices, and their values. The results are compared with and without the TCSC device. To show the validity of the proposed techniques and for comparison purposes, simulation carried out on an IEEE- 30 Bus test system.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

reactive power control, TCSC, stability, GA

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: A SCENARIO OF OBJECT DETECTION IN VIDEO PROCESSING

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC016

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC016

  Register Paper ID - 171091

  Title: A SCENARIO OF OBJECT DETECTION IN VIDEO PROCESSING

  Author Name(s): Gajendra Sujediya, Shashikant Ray

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 105-109

 Year: December - 2017

 Downloads: 12

 Abstract

In the present scenario of object detecting in video processing which is initially proposes a technique for identifying a moving object in a video clip of stationary background for real time content based multimedia communication systems. It deals with identifying an object of interest. Dynamic objects are identified using both background elimination and background registration techniques. Post processing technique is used to reduce the noise. The background elimination method uses concept of least squares to compare the accuracies of the current algorithm with the already existing algorithms. The background registration method used for background subtraction which improves the quality of adaptive background mixture model and makes the system learn faster and more accurate, as well as adapt effectively to changing environments.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Background Elimination, Background Registration, Post Processing.

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: ANALYSES OF MICROSTRUCTURE AND MECHANICAL PROPERTIES OF LOW ACTIVATION MARTENSITIC STEEL JOINT BY TIG MULTI-PASS WELDING WITH A FILLER WIRE

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC015

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC015

  Register Paper ID - 171090

  Title: ANALYSES OF MICROSTRUCTURE AND MECHANICAL PROPERTIES OF LOW ACTIVATION MARTENSITIC STEEL JOINT BY TIG MULTI-PASS WELDING WITH A FILLER WIRE

  Author Name(s): Sharad Shrivastava, Pramod Jain, Saurabh Gupta

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 97-104

 Year: December - 2017

 Downloads: 14

 Abstract


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

(Low Activation Martensitic) LAM steel, Filler wire, TIG, Multi pass welding

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: REPLACEMENT OF LPG TO PROPANE GAS IN BICYCLE MANUFACTURING INDUSTRIES

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC014

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC014

  Register Paper ID - 171089

  Title: REPLACEMENT OF LPG TO PROPANE GAS IN BICYCLE MANUFACTURING INDUSTRIES

  Author Name(s): Amar Preet Singh, Pawan Kumar Agarwal, Harman Preet Singh

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 94-96

 Year: December - 2017

 Downloads: 13

 Abstract

Liquid Petroleum Gas (LPG) is a major resource in engineering industries where it is being heavily utilized for the purpose of heating and production. It comprises of a mixture of propane, butane, and its hydrocarbons. Since it is a clean gas with high calorific value, it is heavily used. This has also caused a tremendous increase in the price of LPG. Moreover, it is well known that propane gas has higher calorific value and pressure than LPG. Also, it is lower in cost and has lesser weight as compared to LPG. In this paper, a paradigm shift from normal LPG to propane gas has been deployed for the execution of brassing, heating and production processes. Also, we have elaborated our observations of a 14 days experiment at a bicycle plant when the fuel was changed from normal LPG to propane. The total saving of fuel consumption was 301.6 kg which helped in the cost reduction of 2.73 lacs. This transformation can prove to be a boon for the upcoming manufacturing industries.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

LPG, propane, calorific value.

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: OPTIMIZATION OF MACHINING PARAMETERS FOR MINIMUM SURFACE ROUGHNESS INDICATORS DURING THE TURNING OF AISI 316 L STAINLESS STEEL

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC013

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC013

  Register Paper ID - 171087

  Title: OPTIMIZATION OF MACHINING PARAMETERS FOR MINIMUM SURFACE ROUGHNESS INDICATORS DURING THE TURNING OF AISI 316 L STAINLESS STEEL

  Author Name(s): Shailendra Singh Rathore, Mahesh Jangid, Sharad Srivastava

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 82-93

 Year: December - 2017

 Downloads: 18

 Abstract

Product quality is very important for the company. This is because, bad quality products will affect the consumer's confidence, image and sales of the company. It may even affect the survival of the company. So, it is very important for every company to make better quality products. Product quality is also very important for consumers. In the manufacturing industry, it is commonly stated that "Quality drives productivity." Improved productivity is a source of greater revenues,employment opportunities and technological advances. In manufacturing industries, manufacturers focus on both the quality and productivity. To increase the productivity, computer numerically control (CNC) machine tools have been implemented during the past decades. Surface roughness is one of the most important parameters to determine the quality of product. The mechanism behind the formation of surface roughness is very dynamic, complicated, and process dependent. Several factors influence the surface roughness obtained in a CNC turning operation. These can be categorized as controllable factors (spindle speed, feed rate and depth of cut) and uncontrollable factors (tool geometry and material properties of both tool and work piece. The aim of present study is to develop surface roughness prediction models using response surface methodology (RSM) based on centre composite rotatable design (CCRD). An attempt has also been to analyse the effect of machining conditions on surface roughness during turning of AISI 316 L stainless steel with carbide insert.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

production, eminence, turning, surface roughness, turning parameters, response surface methodology (RSM)

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: A REVIEW PAPER ON BIG DATA TECHNOLOGIES AND PLATFORMS

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC012

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC012

  Register Paper ID - 171086

  Title: A REVIEW PAPER ON BIG DATA TECHNOLOGIES AND PLATFORMS

  Author Name(s): Jyoti Khandelwal, Manoj kumar

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 79-81

 Year: December - 2017

 Downloads: 16

 Abstract


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

There is no hard and fast rule about exactly what size a database needs to be in order for the data inside of it to be considered "big."

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: EXPERIMENTAL INVESTIGATION ON DIESEL ENGINE TEST RIG WITH ETHANOL-BIODIESEL-DIESEL BLEND

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC011

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC011

  Register Paper ID - 171084

  Title: EXPERIMENTAL INVESTIGATION ON DIESEL ENGINE TEST RIG WITH ETHANOL-BIODIESEL-DIESEL BLEND

  Author Name(s): Pawan Kumar Agarwal, Bhanvendra Singh

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 70-78

 Year: December - 2017

 Downloads: 13

 Abstract


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Ethanol-Biodiesel-Diesel (EBD) blend, diesel

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: INTELLIGENT TRANSPORTATION SYSTEM FOR DEVELOPING COUNTRIES A SURVEY

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC010

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC010

  Register Paper ID - 171082

  Title: INTELLIGENT TRANSPORTATION SYSTEM FOR DEVELOPING COUNTRIES A SURVEY

  Author Name(s): Deepak yadav M.tech scholar, Mr. Raghav singh Dhaker

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 61-69

 Year: December - 2017

 Downloads: 12

 Abstract

India is the second largest country in the category of population. With the increasing population the consumption of the vehicles also increases, leading to critical burden on traffic management in the metropolitan cities and towns of the country. In 2016-17 alone, 30.4 million motorized vehicles were sold in India leading to congestion and accidents on the roads. For controlling the traffic on the road some traditional methods were used like using traffic lights and traffic signs, traffic policemen and round-about. In this paper we will discuss the existing techniques which will help India for controlling the traffic on the roads. General Terms ITS, Sensors, ITS Technology.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

ITS, Sensors, ITS Techniques, ITS Technology, ITS Application.

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: TO IMPROVE QUALITY VALUE STREAM MAPPING/COMMERCIALIZATION WITHIN ADVANCED MANUFACTURING: VALUE STREAM MAPPING

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC009

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC009

  Register Paper ID - 171080

  Title: TO IMPROVE QUALITY VALUE STREAM MAPPING/COMMERCIALIZATION WITHIN ADVANCED MANUFACTURING: VALUE STREAM MAPPING

  Author Name(s): Rajendra Kumar Yadav , Jogendra Choudhary

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 58-60

 Year: December - 2017

 Downloads: 11

 Abstract

Due to the increase in oil prices and high environmental dynamism, organizations delivering in affected markets need to identify ways to reduce time to market (TTM) and cost of non-quality (CONQ) of their commercialization processes, in addition to pursuing and developing new markets. In order to survive over time, organizations need to manage knowledge for exploitation and exploration, utilizing existing competencies and acquiring new ones. Companies in the manufacturing industry today are faced with increasing challenges with respect to cost effectiveness, lead time and quality of the production system. Dealing with these contradictory goals, an important task is the selection of suitable solutions for the integration of inspection processes in the industry within the process chain, which are necessary to ensure the required production quality and quantity. Value Stream Mapping (VSM) is a state of the art tool which is very often used for this by professionals. Value stream mapping (VSM) is used to analyses the lead times, work in progress levels (WIPs) and non-value added time. From the current state VSMs of bar-cutting/bending and column processes we have significant lead times, idle times Improvements are done by identifying the wastes and eliminating them and reducing the non-adding value. Therefore, in this article an innovative approach called Quality Value Stream Mapping (QVSM) is presented. Based on the design elements of VSM, it provides a suitable tool for the visualization, analysis and design of quality assurance measures within process chains in manufacturing. The implementation of the developed approach is exemplarily shown for Value stream in the process industry.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Lean thinking, Value Stream Mapping (VSM), Waste, Variability. Commercialization, exploration

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: IMPROVED PERFORMANCE FOR AUTOMATIC BLOOD VESSELS DETECTION IN RETINAL IMAGES

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC008

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC008

  Register Paper ID - 171078

  Title: IMPROVED PERFORMANCE FOR AUTOMATIC BLOOD VESSELS DETECTION IN RETINAL IMAGES

  Author Name(s): Ram Kumar Choudhary, Vijay Kumar Sharma, Saroj Hiranwal

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 48-57

 Year: December - 2017

 Downloads: 13

 Abstract

In this paper, the proposed approach employs a new methodology for segmenting the blood vessels from the retinal images more effectively. There is possibility for improvement in the process of detection blood vessels using segmentation techniques and then for validation classification methods can be implemented. The database of retinal images is taken from DRIVE and CHASE-DB1, these are available in open source for research. In this proposed work, segmentation of retinal images is compared with sobel and canny algorithms and further this is validated using parameters calculated from vesselness methods. The overall process is carried out in two stages. The first stag is to pre-processing of retinal images from database and to convert the color image into grey scale image and second stage will be for classification methods. From the experimental results, it has been observed that the proposed approach provides to decrease process time and increase accuracy in segmenting Retinal blood vessels.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Retina, Segmentation, DRIVE, CHASE-DB1, Canny operator, Sobel Operator.

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: INVESTIGATING OF THE EFFECT OF TURNING PARAMETERS ON AVERAGE SURFACE ROUGHNESS USING 2 LEVEL FULL FACTORIAL DESIGN OF AISI 1019 CARBON STEEL

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC007

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC007

  Register Paper ID - 171075

  Title: INVESTIGATING OF THE EFFECT OF TURNING PARAMETERS ON AVERAGE SURFACE ROUGHNESS USING 2 LEVEL FULL FACTORIAL DESIGN OF AISI 1019 CARBON STEEL

  Author Name(s): Prateek verma, Sunny vishnoi

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 37-47

 Year: December - 2017

 Downloads: 16

 Abstract

Metal machining has a very important process in manufacturing. Machining Conditions play a vital role in estimating the performance of machining operations. It have long been recognized that the machining conditions, such as cutting speed, feed and depth of cut affect the performance of the operation in great extent. These parameters must be selected to optimize the quality of machining operations. The objective of the present work is to analyze the effects of the machining parameters in turning on the surface roughness parameters of AISI 1019 carbon steel is suitable for manufacturing wire rods and many other products. The Design of experiments based on response surface methodology with three numeric factors (cutting speed, feed rate and depth of cut) five level central composite rotatable designs have been used to develop relationships for predicting surface roughness. The surface roughness parameters were measured using surface roughness tester (Surf coder SE 1200) the design expert software has been used for the analysis. A quadratic model and linear Model have been developed which indicates that interaction is present between the machining parameters (speed, feed and depth of cut). Model adequacy tests were conducted using ANOVA table and the effects of various parameters were investigated and presented in the form of contour plots and 3D surface graphs. Numerical optimization was carried out considering all the input parameters within range so as to minimize the surface roughness. The optimal values obtained are cutting speed 259.46 m/min, feed 0.20mm/rev, depth of cut 0.35 mm. The findings of this study would be beneficial to manufacturing industries where surface finishing plays very important role


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

In machining operation, the quality of surface finish is an important requirement in manufacturing engineering

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: THE ESSENCE OF LEAN ELIMINATE WASTE IMPROVE PRODUCTIVITY

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC006

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC006

  Register Paper ID - 171073

  Title: THE ESSENCE OF LEAN ELIMINATE WASTE IMPROVE PRODUCTIVITY

  Author Name(s): Shweta Sharma, Vimal Kishor Kumawat

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 27-36

 Year: December - 2017

 Downloads: 15

 Abstract

Despite of its type, location or principal market base, today the manufacturing enterprises are bound to adopt sustainable practices like lean principles, integration of processes and inter-organizational collaborations to meet their corporate goals. The majority of studies usually discuss either a system or a subcomponent of the production systems and manufacturing strategies in literature w.r.t. lean production; but the rational (what, why, how) behind each production activity seems to be missing. This paper addresses a comprehensive assessment of the literature on lean production in relation to the green concept, for its significance, feasibility and need for organizations to sustain in the global market. Findings of the review reveal that lean principles along with green model can improve the process flow & employee morale and lower the environmental regulatory non-compliance risk. Further, the environmental and human health risks are often not explicitly considered in lean initiatives that can affect customers & stakeholders throughout the product life cycle, and the manufacturing enterprises working with lean strategies have the possibility of costs sub-optimization and waste reduction from a lifecycle viewpoint. Eg the outcome of a ball industry has been increased by using the principles of lean manufacturing. As the lean manufacturing implies the reduction of waste with in the manufacturing process by categorizing all the activities and processes into three fields namely value adding, non value adding & non value adding but necessary. The methodology used for the project is to first prepare the current state map by collecting data from the shop floor and thenanalyzing it for the possible areas of improvements. After that the analysis and comparison of the suggested solutions with the old one has been done and finally proposed the future state map.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Value stream mapping, Supermarket pull system, capacity utilization, environment, lean production, sustainability.

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: MASS CUSTOMIZATION IN MOTOROLA - CASE STUDY

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC005

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC005

  Register Paper ID - 171071

  Title: MASS CUSTOMIZATION IN MOTOROLA - CASE STUDY

  Author Name(s): Ashish Sharma, Amarpreet Singh, Pawan Kumar Agarwal

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 25-26

 Year: December - 2017

 Downloads: 14

 Abstract

Motorola is a highly reputed, well established company having large customer segment and wide variety of products. Mass Customization in it, was introduced to fulfill the customer requirements, market demand and high market value. To attain mass customization different technological shift was done including the improvement in simulation which is a field of soft computing. Thus, this study shows that soft computing proves to be an effective way to attain customer satisfaction. The whole scenario is based on big data i.e. customization was done using big data techniques.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Mass Customization, Big data, Motorola, Customer Satisfaction

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: MASS CUSTOMIZATION AN APPROACH TOWARDS PERSONALIZATION OF TRAVEL PACKAGES

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC004

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC004

  Register Paper ID - 171069

  Title: MASS CUSTOMIZATION AN APPROACH TOWARDS PERSONALIZATION OF TRAVEL PACKAGES

  Author Name(s): Ashish Sharma, Raghav Singh Dhaker

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 17-24

 Year: December - 2017

 Downloads: 11

 Abstract

This paper employs Mass Customization strategy to design best suited travel package for lay customers. Analysis of customer needs is the key step for product and service variety design of Mass Customization. In this paper, popular Data Mining approach is utilized for suggesting a set of most suitable travel package to the customer according to his/her needs and requirements. A model based on the association rule is being used here that minimizes the processing and operation costs for the service providers. A real-world problem is solved using the model and reported results are compared with those from another published study. The outcome establishes the usefulness of the proposed model.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Mass Customization, Data Mining, Travel Package, Association Rule

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: AUTOMATED PLANTS WATERING SYSTEM USING ARDUINO UNO BOARD

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC003

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC003

  Register Paper ID - 171067

  Title: AUTOMATED PLANTS WATERING SYSTEM USING ARDUINO UNO BOARD

  Author Name(s): Umesh Maru, Mr. Rajesh Jain, Mr. Gajendra sujediya

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 13-16

 Year: December - 2017

 Downloads: 13

 Abstract

Watering is the most important cultural practice and most labor intensive task in daily greenhouse operation. Watering systems ease the burden of getting water to plants when they need it. Knowing when and how much to water is two important aspects of watering process. To make the gardener works easily, the automatic plant watering system is created.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Cultural; Intensive; Burden

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: A REVIEW AND COMPARATIVE STUDY ON SINGLE-PHASE AC-DC CONVERTERS FOR THEIR HIGH FREQUENCY APPLICATIONS

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC002

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC002

  Register Paper ID - 171066

  Title: A REVIEW AND COMPARATIVE STUDY ON SINGLE-PHASE AC-DC CONVERTERS FOR THEIR HIGH FREQUENCY APPLICATIONS

  Author Name(s): Tushar Agarwal , Shubham Kumar Bhardwaj , Krishan Kant katara , Rohit Pareta

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 6-12

 Year: December - 2017

 Downloads: 15

 Abstract


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

AC-DC Converters, Harmonics reduction, Isolation transformer, power quality enhancement, Power-Factor improvement

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: FUZZY LOGICCONTROLLER FOR DOUBLY FED INDUCTION GENERTOR(DFIG)WITH WIND TURBINE A REVIEW

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC001

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC001

  Register Paper ID - 171065

  Title: FUZZY LOGICCONTROLLER FOR DOUBLY FED INDUCTION GENERTOR(DFIG)WITH WIND TURBINE A REVIEW

  Author Name(s): Jigar Trivedi , Tushar Agarwal

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 1-5

 Year: December - 2017

 Downloads: 14

 Abstract

as requirement of power resources are increasing, demand of non-conventional resources is also increased. In this field, solar and wind are the main resources to generate power. In this paper review of such techniques is carried out which are used in wind energy generation. Various generators used with different control techniques to manage stability and to improve output parameters along with efficiency. Doubly fed induction generator (DFIG) taken as base for this paper and fuzzy logic controller (FLC) for the controlling part of converters in grid side converter (GSC) and rotor side converter (RSC) of generator. Active and reactive power are the main parameters to be considered and many researchers worked to improve these parameters which is reviewed and concluded that there is a scope of improvement in parameters by analyzing these parameters and this technique is used with any type of generator due to its flexibility and noncomplex modelling.


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

doubly fed induction generator (DFIG), Fuzzy logic controller (FLC), grid side converter (GSC), rotor side converter (RSC)

  License

Creative Commons Attribution 4.0 and The Open Definition

  Paper Title: Full Conference Proceeding ICCCT 2017 International Conference On Communication & Computational Technologies

  Publisher Journal Name: IJCRT

  DOI Member: 10.6084/m9.doi.one.IJCRTICCC000

  Your Paper Publication Details:

  Published Paper ID: - IJCRTICCC000

  Register Paper ID - 170948

  Title: FULL CONFERENCE PROCEEDING ICCCT 2017 INTERNATIONAL CONFERENCE ON COMMUNICATION & COMPUTATIONAL TECHNOLOGIES

  Author Name(s): ICCCT 2017

 Publisher Journal name: IJCRT

 Volume: 5

 Issue: 12

 Pages: 1-393

 Year: December - 2017

 Downloads: 14

 Abstract

Full Conference Proceeding ICCCT 2017 International Conference On Communication & Computational Technologies


Licence: creative commons attribution 4.0

  License

Creative Commons Attribution 4.0 and The Open Definition

 Keywords

Full Conference Proceeding ICCCT 2017 International Conference On Communication & Computational Technologies

  License

Creative Commons Attribution 4.0 and The Open Definition

Showing Page 1 of 1

ISSN and 5.97 Impact Factor Details
ISSN
ISSN
ISSN: 2320-2882
Impact Factor: 5.97 and ISSN APPROVED
Journal Starting Year (ESTD) : 2013
DOI Details

Providing A Free digital object identifier by DOI.one How to get DOI?
For Reviewer /Referral (RMS) Earn 500 per paper
IJCRT RMS | Earn 500 Per Paper.
Our Social Link
Open Access
This material is Open Knowledge
This material is Open Data
This material is Open Content

Indexing

indexer
indexer
indexer
indexer
indexer
indexer
indexer
indexer
indexer
indexer
indexer
indexer
indexer
indexer
indexer
indexer
indexer
indexer
indexer